PRE-SALE ORDERS ARE FINAL - THERE WILL BE NO REFUNDS -- If you are not 100% sure you will be financially stable then don't pre-order. No more exceptions. These amps are capable of a real 1500+ watts at 12.8 volts. They will out-perform many other 1500 watt rated amps (like the Audiopipe 1500) easily! COST ON PRE-SALE : AUGUST - $250 each SEPTEMBER - $260 each OCTOBER - $270 each NOVEMBER - $280 each PRICE IS SHIPPED IN CONTINENTAL 48 STATES. CONTACT ME ABOUT AK, HI, and international !!! The earlier you pre-order the lower the price will be. REGULAR price will be $350 MAP / $549 MSRP when in stock! PAYPAL me at sundownz@sundownaudio.com to take advantage of the pre-sale offer. Pre-sale will be closed on November 15th ! ---------- Externally it will look just like the old model SAE-1200D : Specs are also rated the same : SPECIFICATIONS: * 1200 x 1 watts @ 1 ohm * 600 x 1 watts @ 2 ohms * 300 x 1 watts @ 4 ohms * 0.153v - 5.6v adjustable input sensitivity * 15 Hz - 250 Hz Frequency Response * > 90 dB S/N Ratio * 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current) * 50 Hz - 250 Hz adjustable 12dB Low-Pass Crossover * 15 Hz - 50 Hz adjustable 12dB Subsonic Filter * 0 or 180 degree adjustable phase switch * 0 - 12 dB adjustable bass boost with 60 Hz center frequency * Wired Remote Control unit included * 5x 30 Amp Internal Fuses * 17" L x 10.6" W x 2.2" H BUT the board is ALL NEW in design : Updates : 1) Double sided PCB board (v.1 was single sided) 2) More primary input caps 3) Large brass bars for power supply current 4) Revised layout 5) Superior Soldering and assembly quality TESTING vs. similar board to Audiopipe 1500 / 1800 :