Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 06/25/2018 in Posts

  1. 7 points
    Small Update. Finished my A-Pillars !!! Got a little work to get back on them later. But for now, I LOVE the way the perform !!! After the holidays, hoping to get back to the doors !!! Thinking metal braces !!!
  2. 5 points
    The SSA Demon is now enroute to us.
  3. 5 points
    Baby Penelope!! She arrived just in time for dinner!
  4. 5 points
    A new side project we have had going for a few months now on the side. At this time, they will only come in our SSA Testarossa red and come fully loaded options wise, as these are meant to be premium units. They have Japanese Koyo bearings for super long life, as well as 6 phase hairpin stators. Some will have billet cases, all will have a machined pulley cover. As of now, the SSA Testarossa's have been selling via word of mouth and at a killer intro period pricing. The first SSA Testarossa is in our family RX330 and has been going really strong since day one. 370 amps. Here are two of the first 25 models:
  5. 5 points
    With the Dcon >> Demon, this would be our Gcon >> Hellion. If you read the Demon topic, it will explain about how the Gcon had a similar life as the Dcon. As of March of this year, the Gcon 12 was our all time, best selling subwoofer. The Gcon, in a simplified explanation, was very close to the original SSA Icon, for a pinch less. A very well balanced and accurate, while also efficient sub that can could take some power while being flexible and composed in different enclosures in both home and car. So the Gcon was our affordable all around subwoofer for many different installs. As with the Dcon, our build house said it was no longer feasible to be made here in the USA. Moving forward, we knew we had to bring back something really strong in the void that was left by the Gcon, as not everyone has the power for an Icon. This Hellion is going to be that next step in the timeline of the Gcon. Both in reaching back to the original Icon and Gcon sound, while stepping forward at the same time. In relation to the Gcon, the Hellion will have improved cooling, more Xmax, available 18" model, option of additional spider and upgraded leads, possible flat wound coil for more high output needs, a pinch more motor force, higher power handling, and a chromed motor finish. With the Hellion, we will be offering 10's through 18's, as well as a few options (something we have not really been able to offer in the past) as the Hellion will be made to order here in the USA. The good news is, the lead time will be substantially faster with the Hellion compared to our past build house. Some quick info: Aluminum 4-layer 3" voice coil (optional flat wound coil) Heavy duty Pulp Fiber cone Dual progressive spiders (with option for 3rd) Woven Tinsel Leads (with optional upgrade) Double stacked magnet motor, with pole vent and rear motor venting Double layer hybrid foam surround Push terminals 12 spoke basket
  6. 5 points
    Coached a 7-2 and 7-1 win today. Both my boys scored.
  7. 5 points
    My turkey vulture got his other wing yesterday!
  8. 4 points
    A brief introduction to the all new SSA Demon, but first a farewell to its predecessor. Our very long running SSA Dcon has ridden off into the sunset, or at least taking a breather. The SSA Dcon was our second subwoofer model we ever launched. At the very beginning, we had the Icon and as it gained traction we saw there was a need for a pure SQ sub of more modest power rating than that the Icon. So in early 2008, the first SSA Dcon was launched. (The Xcon followed shortly after). That being said, the Dcon was almost an immediate hit, with a long 2" copper coil (rarity to have one made in the USA) triple stack motor, rear vent. The Dcon was very affordable, well made, quite efficient, clean across the entire range, and flexible with enclosure demands. It is interesting as there are some SSA Family members who swear by their Dcon and will not give it up ever. (It even became a favorite of some of the home audio crowd). All that being said, the Dcon evolved a bit for its second generation, we made a leap forward in motor force moving to what is best described as a scaled down Xcon motor, with a large single slug, solid pole, and deeply bumped back plate, while beefing up the suspension and leads. We were able to bring the power handling up 33% while not hurting the sound that made the Dcon successful. There was a stretch of a few years, before we ran out of stock, that the SSA Dcon 12 was our all time best selling subwoofer. So its existence was very important to SSA. Well with changes in the market (read:customer demands and amps getting much cheaper), as well as sky rocketing material costs, building the Dcon in the USA no longer was an option, so production stopped early 2017 for both the Dcon (and Gcon) and inventory ran out later that year. Late last year, due to the long lay off with out the Dcon (and Gcon), we started development of an updated Dcon at a new build house. The quality and performance of our SSA Evil1 tweeters were above our expectations, so we decided to send more production to that same build house. As we saw that the market slowed overall for modest power rated subs due to power getting cheaper and people wanting higher power handling subs, so the market began to really start heating up in the 500 - 1200 watt range, I knew we needed to address it. There is an 8" model developed, but it will not make it this first production run. The new model had to handle more power and have more xmax while not sacrificing the balanced and clean sound the Dcon had established for nearly a decade. That meant larger motor, larger coil, more suspension, larger leads, thicker cone, taller surround, etc. In the end, all of the changes that happened to the over all design, we could no longer call it a Dcon. In sticking with the theme of the Evil, a model name that has become so well known, while respecting the Dcon, the Demon name was selected. The Demon is a great blend of the previous Dcon and Xcon, both in design and appearance. In prototype testing, the SSA Demon thrived smaller to mid-sized ported and mid-sized sealed enclosures. Quick SSA Demon stats: 2.5" copper coil Aluminum former Aluminum Shorting ring Solid pole, non-vented bumped back plate Large single slug motor Pressed pulp cone Tall roll surround Push terminals Dual Nomex progressive spiders Stitched tinsel leads Large dome dustcap I will list T/S specs and enclosure recommendations shortly. We are very excited about the SSA Demon as it bringing back to our line up a pure sound quality subwoofer that will be affordable, while still having the characteristic SSA warmth and output.
  9. 4 points
    Also got started on a new painting!!
  10. 4 points
    Hanging out with baby Mila today!
  11. 4 points
    I don't normally bore you guys with my art, but wanted to show of my painting! LOL My fat ass for size referance. Hopefully get it clear coated tomorrow! Woot!
  12. 4 points
    2014 dodge ram driven 85 miles a daily to and from work. This is the first vehicle I had to do a complete deep cut to get everything out. I did not do the wheels or tires. Doing this reminds how much I like doing cars.
  13. 4 points
  14. 4 points
    Got this in the mail today.
  15. 4 points
    Here is my other ride. Take notice on the last picture of the two awards this car has won. All power options and loaded with horsepower too!
  16. 4 points
    Here are some good shots.
  17. 3 points
    A quick rendering of the product packaging for the SSA® Demon, coming soon!
  18. 3 points
    Gram holding my new grandson.
  19. 3 points
    Forgot to add this to the log, added a 12.1" vertical "tesla style" head unit.
  20. 3 points
    We just launched the all new SSA Icon. Check it out here: http://store.soundsolutionsaudio.com/products/icon-12-1250w-subwoofer-by-ssa-new-for-2018.html A nice mixture of a look back and an advance forward. Other sizes will join the 12 as funding allows.
  21. 3 points
    We just kicked off our Fall Sale @ SSA! Enjoy some nice savings while the weather is cooling down. All sale prices are as marked, simply add to cart. Celebrating 12 years in business. Sale ends 10/21/2018 #ArriveLoud https://store.soundsolutionsaudio.com/categories/fall-sale.html
  22. 3 points
    First steak on the Souse Vide. details after pictures.
  23. 3 points
    Put the Flex to work today. First time doing a heavy cut to a polish, then applied sealer. This is my niece's first car and it has 194k miles on it so there was some needed paint correction. There are lots of paint chips, but it turned out very nice.
  24. 3 points
    Disaster struck. I had my bed covers off doing stuff around the yard when it started raining. Same day we took this pic ... Totally ruined my Enclosure Spent weeks getting things cleaned and straightened out. Shit happens I guess ... Any ways ... I built a new enclosure and got it installed in the Avalanche. 5 Cu. Ft. with 33 Htz port tuning ... Can't wait to get her powered up !!! Starting on the Amp Rack this week !!!
  25. 3 points
    2006 Honda VTX 1800. Made it look better than new!
×