Leaderboard

Small Update. Finished my A-Pillars !!! Got a little work to get back on them later. But for now, I LOVE the way the perform !!! After the holidays, hoping to get back to the doors !!! Thinking metal braces !!!

The Wait is over. Just in time for our annual Black Friday SSALE. https://store.soundsolutionsaudio.com/subwoofers/soundsolutionsaudio/evil/ When your sub bass goal is nothing but supreme, unrestrained performance without compromise, the choice is the SSA Evil. The capabilities of the SSA Evil put it in very exclusive company at the zenith of the marketplace. This is where you look first for the ultimate 'ground pounder' that will not miss or muddy a note. Crisp and clean across the entire frequency range for those demanding outstanding linear performance thanks to an FEA optimized motor. Employing a massive triple stack motor, five sandwiched 10" progressive Nomex spiders, an anodized vented Aluminum former, a huge 4-layer 4" flat wound Aluminum coil and a towering 'Venturi' solid pole, the SSA Evil has the muscle to handle almost anything you can throw at it. The SSA Evil is also a top pick for extreme level SPL and bass-boxing competitors alike, while still having the composure for the elite home audio projects. A versatile monster that will meet the most critical low frequency demands while achieving extreme output levels when called upon. Sonic performance so vicious, it had to be deemed Evil. #SSAEVIL #EVILSUBWOOFERS #EVILINSIDE #ARRIVELOUD #SSA https://store.soundsolutionsaudio.com/subwoofers/soundsolutionsaudio/evil/

Some glam shots.

Pruned all new members since 7/15, renewed our IBP license which should activate Spam prevention again, and deleted most of the spam topics I saw, should be a clean forum again. Enjoy.

They guy was amazed at what I was able to get out. I love doing work like this.

Sold the Mustang yesterday. Made a nice chunk.

Got a new piece of audio equipment for the first time in a while.

2013 Chevy polished up real nice!

I suck at pictures when I get busy.

Spent the V-day at the spa and worlds largest natural hot springs pool! 104 degrees!!Of course looked more like this as it was cold outside and snowing.

Play the sub alone and listen to it. I would be suspect of the settings....any shop that tells you about box rise but forgets to tell you about box fall is confused. He is just regurgitating something he doesn't understand. To explain, all drivers have an impedance response and this response can change based on the environment it is mounted in. This response is a curve, it does not only rise but also falls at differing frequencies. Subs are specified in thermal and mechanical power handling to deal with both the response of the driver and the box it is in. Having the installer "scare" you that you aren't getting power because of rise is completely irrelevant. To make matters worse, implying that you would hear a difference in a 1500w amp as compared to a 1000w is asinine. Go enjoy your setup. Your installers comments take with a grain of salt. Since you have to take them with a grain of salt I personally would double check everything he did.

The SSA Demon is now enroute to us.

Baby Penelope!! She arrived just in time for dinner!

With the Dcon >> Demon, this would be our Gcon >> Hellion. If you read the Demon topic, it will explain about how the Gcon had a similar life as the Dcon. As of March of this year, the Gcon 12 was our all time, best selling subwoofer. The Gcon, in a simplified explanation, was very close to the original SSA Icon, for a pinch less. A very well balanced and accurate, while also efficient sub that can could take some power while being flexible and composed in different enclosures in both home and car. So the Gcon was our affordable all around subwoofer for many different installs. As with the Dcon, our build house said it was no longer feasible to be made here in the USA. Moving forward, we knew we had to bring back something really strong in the void that was left by the Gcon, as not everyone has the power for an Icon. This Hellion is going to be that next step in the timeline of the Gcon. Both in reaching back to the original Icon and Gcon sound, while stepping forward at the same time. In relation to the Gcon, the Hellion will have improved cooling, more Xmax, available 18" model, option of additional spider and upgraded leads, possible flat wound coil for more high output needs, a pinch more motor force, higher power handling, and a chromed motor finish. With the Hellion, we will be offering 10's through 18's, as well as a few options (something we have not really been able to offer in the past) as the Hellion will be made to order here in the USA. The good news is, the lead time will be substantially faster with the Hellion compared to our past build house. Some quick info: Aluminum 4-layer 3" voice coil (optional flat wound coil) Heavy duty Pulp Fiber cone Dual progressive spiders (with option for 3rd) Woven Tinsel Leads (with optional upgrade) Double stacked magnet motor, with pole vent and rear motor venting Double layer hybrid foam surround Push terminals 12 spoke basket

Kudos on the work Neal!!! While not wrestling, I did cover Bare Knuckle #8 this past weekend. While not my article, here's the photos. The top prelim shots are on my IG. https://www.rocketsports-ent.com/knockouts-galore-at-the-bare-knuckle-fighting-championship-8-in-tampa/ J

The kid landed a sorority! She must have really wanted that mf'er too, as she is paying the dues with her own money. Here I'm learning their gang sign! haha Thank you Neal for offering your help!

Ended the day going to a baseball game. Won the championship! Memories for the boys

Getting work! Had my Fu Dog and flowers on the back of my leg colored yesterday! One more session to go and that leg should be solid. LOt more area than one would think, to get a body suit.

Another piece to the puzzle was dropped off today at my job.

A brief introduction to the all new SSA Demon, but first a farewell to its predecessor. Our very long running SSA Dcon has ridden off into the sunset, or at least taking a breather. The SSA Dcon was our second subwoofer model we ever launched. At the very beginning, we had the Icon and as it gained traction we saw there was a need for a pure SQ sub of more modest power rating than that the Icon. So in early 2008, the first SSA Dcon was launched. (The Xcon followed shortly after). That being said, the Dcon was almost an immediate hit, with a long 2" copper coil (rarity to have one made in the USA) triple stack motor, rear vent. The Dcon was very affordable, well made, quite efficient, clean across the entire range, and flexible with enclosure demands. It is interesting as there are some SSA Family members who swear by their Dcon and will not give it up ever. (It even became a favorite of some of the home audio crowd). All that being said, the Dcon evolved a bit for its second generation, we made a leap forward in motor force moving to what is best described as a scaled down Xcon motor, with a large single slug, solid pole, and deeply bumped back plate, while beefing up the suspension and leads. We were able to bring the power handling up 33% while not hurting the sound that made the Dcon successful. There was a stretch of a few years, before we ran out of stock, that the SSA Dcon 12 was our all time best selling subwoofer. So its existence was very important to SSA. Well with changes in the market (read:customer demands and amps getting much cheaper), as well as sky rocketing material costs, building the Dcon in the USA no longer was an option, so production stopped early 2017 for both the Dcon (and Gcon) and inventory ran out later that year. Late last year, due to the long lay off with out the Dcon (and Gcon), we started development of an updated Dcon at a new build house. The quality and performance of our SSA Evil1 tweeters were above our expectations, so we decided to send more production to that same build house. As we saw that the market slowed overall for modest power rated subs due to power getting cheaper and people wanting higher power handling subs, so the market began to really start heating up in the 500 - 1200 watt range, I knew we needed to address it. There is an 8" model developed, but it will not make it this first production run. The new model had to handle more power and have more xmax while not sacrificing the balanced and clean sound the Dcon had established for nearly a decade. That meant larger motor, larger coil, more suspension, larger leads, thicker cone, taller surround, etc. In the end, all of the changes that happened to the over all design, we could no longer call it a Dcon. In sticking with the theme of the Evil, a model name that has become so well known, while respecting the Dcon, the Demon name was selected. The Demon is a great blend of the previous Dcon and Xcon, both in design and appearance. In prototype testing, the SSA Demon thrived smaller to mid-sized ported and mid-sized sealed enclosures. Quick SSA Demon stats: 2.5" copper coil Aluminum former Aluminum Shorting ring Solid pole, non-vented bumped back plate Large single slug motor Pressed pulp cone Tall roll surround Push terminals Dual Nomex progressive spiders Stitched tinsel leads Large dome dustcap I will list T/S specs and enclosure recommendations shortly. We are very excited about the SSA Demon as it bringing back to our line up a pure sound quality subwoofer that will be affordable, while still having the characteristic SSA warmth and output.

Other funn of the week! Not to bad for a $350 tattoo.

Got this decal up on the wall also! ATM for size. LOL HAve all five of the patents from the 1890's on tattoo machines framed and hung up also. Forgot to grab a pic though.

The girls took forth place!! Is the highest they have ever placed at nationals! Proud dad right here.