Leaderboard

Sean I bent your metal today while I was at the shop this morning.I still have to space the holes for the dummy lights I can do that at home.I bent these on a 8' brake lol.I went ahead a made you 2 of them so you can choose the one you like best.These are hand made so might no be as good as a computer plasma type deal but hopefully these will work for what you need it for.The 8'foot brake was about a bit to much to bend these little brackets lol..I put some 1/4 hems on them turned to the inside so the brackets would not have sharp edges and would add strength.I will get those holes layed out for you,be thinking if you may want to try out a different lay out for those dummy lights on that extra one I bent you or something just incase that first idea don't work out.

So the issue with the midbass is pretty much solved. see this thread: I'm planning to start the A pillar pods this weekend. But first I made a small upgrade to the amps. Polk must be clearing old stock because you can grab the PAD2000.2's for $50 each (these are the same as the PPI 600.2). Great $/watt. I'm running one to each midbass. These replaced some very old Kicker 250.2's I bought 10 years ago. I was planning to grab a second nvx 4 channel to clean up the install a bit but this was such a great deal. I considered grabbing another to replace the subwoofer amp. https://smile.amazon.com/gp/product/B07HNRLCXC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 some before and after pics. apologize for the wiring disaster.

Looks like I could pull off a 2x150+