Nvr2loud22

that box volume is wayy to small for that sub. it deff wont sound that good. Please give accurate advice and not something pulled out of your ass. haha. So you think the box volume is cool for a fully loaded 15 Fi BL?

that box volume is wayy to small for that sub. it deff wont sound that good. It says they need 3-5 cubic feet. Hows that to small?

I just built a box for my new fully loaded Fi BL 15. Specs: H:18" W:17.5" L:38".....Square port length: 4.5" Port length 2: 20.75"...with 3/4 MDF. Box is tuned to 33.14hz and the Box volume is 3.822cuft. Sound good? will it work?

Awesome thanks man.

He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps? Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas? Would it work, sure. Does it make sense? No way. All im trying to do is to have speakers loud enough to hear over the sub. So i thought that two tower speakers would do the trick. Any other ideas? I hate music when its straight bass. I like being able to hear the lyrics.

im going to be runing about 2000 watts should i get an Optima yellow top? http://shop.optimabatteries.com/products/productdetail/part_number=D35/1737.0 Let me kno what you think.

He only has three amps but they are all mono, he was just saying 550x2 (how much power per channel). What all equipment will you be running to these amps? Okay so i cancelled the alpine 650 and went with an older amp i found in my closet. Its a TMA 250. So I'm going to run that Sundown to my sub, the TMA to my front drivers, and the Rockford 2 channel to two Wake board tower speakers put up in the back. I'm having a bar welded in the back so they can hang. http://www.sonicelectronix.com/item_7142_Infinity+6000M.html There is the link to the speaks. Will that work? The only thing is is that i don't know drivers to run in the front? its a 97 4runner. any ideas?

I just want a system that pounds hard as hell. Im a daily driver and will prob not play it to often when the car is off. I wont be entering in any competitions. Just for my use only. I Heard about the whole Fi series through ***** ***** of course. I wanted a BTL but i found it pointless and why not just pay less? So all in all i just want to be able to jump in my car and mob around pounding my stereo.

What is this Big 3 upgrade i keep hearing about? Thanks

Okay so im hooking up my new system and i dont know what to get for my fuses or my distribution block. Im going to run 3 amps connected to a powermaster D1200 battery. An alpine 650 mono, 2 channel Rockford punch 550x2, and a Sundown SAE 1200D. What distribution blocks would work? Fuses? Gauge sizes? How would i hook up the battery to the amps and other battery? Anyway, any help will help. Thanks everybody.

Where can i find that amp on sale?

Whats the difference between a dual 1 ohm sub and a dual 2 ohm? And if the amp puts out at 2 ohms why wouldnt i get a 2 ohm sub?

OKay. I think i found what i want. How about running a single Fi BL 15 dual 2 with this amp http://www.sonicelectronix.com/item_11552_Kicker+08ZX1500.1.html Thanks for the help guys.

Should i get a class D or mono?

Shit. I havent ordered the BL yet. Should i get a dual 1 or a dual 2? And whats a good amp to run the Bl