Rainman215

To me it depends on how you tune them. Your typical evs on the rear deck sound like ass. My 8s sound good on low and high volume. Yes the magnet will fit in a 6.5" hole because the magnet is like 2 or 3 inches wide. I don't have an eq or processor... Just my 100.4 and 125.2

I've got 2 bridged per 2 channels on the 100.4 so around 160 or so to each mid.

Hy this is like my setup. 4 neo-pro 8s... Bridged on the 100.4 2 srlenium st200s and 2 morel mdt-12 tweets 1 of each wired to 4 ohms per channel on a 125.2 The neo pros will get loud wired 1 per channel but 2 bridged is another story.

I'd blame your amp and settings on it.

I have 2 nsv1 18s in a 9 cu ft wall, two3500s strapped at .5 each. I rise to 1 ohm per amp... And with 1 amp it seems just about equally as loud and I'm metering damn near the same numbers. Gonna try unstrapped one day.

Fingernails for wire strippers lol.

Weird the other owners had problems. Mine fit/works perfectly. Assuming we all got the same bottom bolt I guess I fucked up my threads lmao. Oh well.

Alt is running strong. I used to check it every few days to make sure there were no cracks or anything. I gave up lol. this ones a beast. Thanks for working with us Honda owners.

Thanks. I get it just need to get my meter on it. Tuned it by ear an it sounds good.

I get it.... I think lol.

What setting on the mm? What will the reading difference of the dmm be once I reach the 2500hz crossover point.

I have a dmm.

I need to cross my mids/tweets at around 2500. With the 10x switch making the highest frequency 5000, would about halfway on the dial be about 2500?

Check the records page on Termpro. Sounds like your up there. Was that scorewith the meter in the kick?

Good job on the score. I missed a certain world record in the wall class by .3 db... I'll get it at Carlisle.