Jump to content

ngsm13

Members
  • Content Count

    973
  • Joined

  • Last visited

Everything posted by ngsm13

  1. ngsm13

    Term Lab Question

    what song was you playing to get 139.9 with music? Thats a pretty good score for bass race! I hit 140.5db with the car off with my one 15" BL. That probably wasn't a bassrace... just a peakhold on a song... nG
  2. ngsm13

    Tons of new ITEMS in the store

    Gotchas. Good to know. nG
  3. ngsm13

    two amps for four 15 btl loaded

    how much can i get either for and what would the voltage requirements be? Minimum of a 200amp alternator, big3, dual runs of 1/0, deep cycle under the hood, and 2-4 G31 deep cycles in the rear. My personal thoughts. nG
  4. ngsm13

    New Tinsel Leads

    w00ts. Go ROBIN!!! lol. nG
  5. ngsm13

    Tons of new ITEMS in the store

    Are ALL products AUTHORIZED? nG
  6. ngsm13

    two amps for four 15 btl loaded

    Memphis MOJO 4kw OR Hifonics Goliath nG
  7. ngsm13

    Happy Birthday JNTAR

    Let's have sex. nG
  8. ngsm13

    box help/ advice....

    Would work well. Done it numerous times. nG
  9. ngsm13

    BTL 12" and port area

    I think ~120 would be what I'd use... nG
  10. ngsm13

    Scott question: Broken Tinsel Lead

    Found it. . Personally, I surgically removed the dust cap. I taped off the gap. Then with my set of precision cutters I carefully removed all the CA glue from around where the coil lead and tinsels are soldered together. I desoldered the tinsel leads and carefully removed them. Also, desoldered the rest of the leads from the speaker terminal. Then, When I received my new tinsels. I made each length even, slid them through the existing hole in the cone, and carefully wrapped the coil lead around each tinsel. Then soldered each tinsel real well. After that I coated each one in a gob of CA glue. Tested both coils with a 9V battery. Soldered the tinsels onto the terminals. Replaced dustcap with goop. There ya go wink.gif. nG
  11. ngsm13

    Scott question: Broken Tinsel Lead

    I commented on this in 727kid's thread, let me see if I can find it... nG
  12. ngsm13

    Who would do a 20"?

    Not a large market. nG
  13. ngsm13

    BTL vent area

    Sure. But reducing port area, and leaving the length the same will LOWER tuning. :fyi: nG
  14. ngsm13

    Break In period for new speaker.

    Precisely. No need for break-in, sub will break in naturally. nG
  15. ngsm13

    Battery question

    Well I have four G31 Optima YT's... and love them. But also b/c I got them for $110 each. Heh. So, Kinetik's are good... but so expensive. I guess if I was in your position, I'd pick up some Intimidators. nG
  16. ngsm13

    Battery question

    Get the most "battery" you can get, for the amount of money you want to spend. nG
  17. Indeed. The "something" that you wire in... all it will do is consume power. :fyi: nG
  18. ngsm13

    Need Help Finding "Specialty Screws"

    Why didn't you visit? nG
  19. ngsm13

    Car Audio & Electronics?

    Indeed. nG
  20. ngsm13

    Need Help Finding "Specialty Screws"

    Did you try partsexpress? I found some of mine non-standard screws there... nG
  21. ngsm13

    Is what this installer said true

    Guy must be an idiot. nG
  22. ngsm13

    Must-see Movies

    25th Hour. nG
  23. ngsm13

    eaglepicher

    I got quoted $329 a piece... nG
  24. They will look aesthetically the same. Just an :fyi: So, regular pics will show no difference nG
×