Jump to content

zZZzzzSnooze2nd

New Members
  • Content Count

    21
  • Joined

  • Last visited

Posts posted by zZZzzzSnooze2nd


  1.  

    I went with direct leads because the push terminals broke off & it was dangling! So I took both off. This XCon is the first generation, it is just under 5 years old. It was reconed before about 2 years ago, and just started using it. it was a bad recone job lucky I ordered 2 recone kits, Dustcap came lose first day out & it was flapping. spider came completely off later. I wanted the job done right, So I did it myself. I think I did it right. blink.png  I'm proud to say I am no longer a Recone Virgin. biggrin.png 


  2. Hey guys, the recone kits came in. He was wondering what Epoxy adhesive to use, He wants to put the same type back on there. He don't have one that drys rock hard like the one that was on my SSA Subwoofer. Before he does the recone, he wants the right stuff holding it in so it don't fly out at me I guess, lol. So if anyone knows the glue that SSA uses, it will be much appreciated. I have no clue if there is only one kind of epoxy glue or different types, I'm assuming there is different strengths? Thanks


  3. Got wrong tracking number. Shows it was picked up, But it was Shipped and delivered somewhere in California. Still got nothing here in Canada, BC. I looked & can't find a phone number & emailed them, I guess it is all backed up. So, here I am at the forum now. Maybe here will be faster? #3627

    Two SSA xCON 12" D2 recone kits. shipped to V2N-2S8


  4. Looks good, where did you get the Xcon sketch-up image?

    Made it myself awhile back, Just to see if it will fit the enclosures I was making. It is a perfect copy of the Xcon 1G to see if there is good clearance for mounting depth & to see how the finished product will look.


  5. I was just wondering if 4 of these batteries will be good for a car audio system. 2,000 watts RMS? This is the only best battery that I can fine in my own town. I can't get XS Power or anything like that. They do sell Kinetik at this one place but they are marked up 50% higher then SonicElectronix & I don't want to mail order any car batteries. There Shuriken batteries at another store too. there marked up high like the Kinetik. I like to buy them in store, If anything gose wrong with them. I can just drive to the store & return it. These Nautilus AGM Deep Cycle batteries are in stock ready to buy.

    Motomaster Nautilus AGM Deep Cycle 12 volt Battery C$259.99

    • Brand Name - Nautilus
    • Cranking Amps - 1110
    • Application - AGM
    • Dimensions - 13 x 6-5/8 x 9-7/16-in
    • Amp Hours - 100
    • Group Size - 31
    • Free Warranty Replacement Period - 18
    • Total Warranty Period - 48
    • Voltage - 12
    • Weight - 71 lbs
    • Reserve Capacity - 200

    Rs7Sn.jpg


  6. (2x) Quad L5 Kickers in a 24cu.ft @ 18Hz, For Stage use. Could use L7 or Solo X! Oh yeah, No SoloX in 15" size. But for the L5 with 3,000w@2-ohm x2 with Peavey IPR 6000. Talking weight here so will be rolling Quad Subs. Let me know whats on your mind good or bad.

    4556246876_c98bf348c3_o.jpg

    4556246950_c7f270fc04_o.jpg

    4555617403_34d53e37be_o.jpg

    4556247200_98e19d1f15_o.jpg


  7. Wow, be careful as to not push to too hard free air.

    Sure, It was late so i removed it from enclosure. I was thinking of making a Bandpass box for it. That can be a Sealed box when Ported side is removed. Not too sure what is the best way to keep them together.


  8. 12" SSA XCON D2

    Re 3.7 Ohms (1.85 per coil wired in series)

    Fs 32.4 Hz

    Qms 5.24

    Qes .39

    Qts .37

    Mms 222

    Vas 35 l

    Sd 480 cm^2

    BL 20.65

    SPL 86.7 1 W/1m

    Xmax 31mm

    Enclosure Recommendations:

    Sealed: .9 - 1.25 cu.ft.

    Sealed: 1.35 - 1.5 cu.ft. optimal

    Ported: 1.75 - 2.25 cu.ft. @ 26-33hz

    Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.

    Sub Outside Dia.: 12.500”

    Cut Inside Dia.: 11.150”

    Displacement: 0.17 cu.ft.

    ok, BTY the Sub Outside Dia is 12.750” with Rubber seal on.


  9. Did you make those breakdown pics or find them on the website somewhere? If you made them, good job, they look great.

    Nope I didn't fined them, I Made it using Google SketchUp 7. I'm going to remake the hole thing, I forgotten a few things.

×