M82a1snake

and i got two AQ 2200D's http://yfrog.com/j6imag0090fj http://yfrog.com/9fimag0091ej and coming soonn i plan to either build a walled off box or an up fire box, i still am waiting for my HO alt a 350 amp from alternatorparts.com 350 amp alt with external outboard rectifying bridge! and im going to have 7 yellow top optimas cuz i have MADD hookup on yellow tops for brand new $50 bucks a yellow top from my cuzin! im probably going to use 2/0 awg power and ground wire , its welding wire lol 00 AWG (-1 AWG) wire haha but i might just use two strands of zero. only thing im not sure about is if i should run a relay inbetween each battery to limit current, or if i should just parallel all batteries together , or run all of em independant off the HO Alt. tell me what you think box will be tuned to 32-36 hz im not too sure cuz i dont know how to account for large amounts of resin bracing on the walls of the box.

http://yfrog.com/0uimag0062vj thats the cash flow from the fast food business lol i have two fi btl 18"s fully loaded, but U.P.S. decided to drop the motha FUCCING thing!! and cracked the basket! http://yfrog.com/6ximag0084tj http://yfrog.com/hqimag0082gj

ok well thanks for all the pointers and dnt rlly appreciate the down talk.. and just because i dont know everything about ported enclosures doesnt mean I AM A noob... btw 10 cu. ft. a sub is on fi's website recommended ha. but so i should build it bout 7.5 or 8 cu ft a a sub net sence ill be putting 3000wats rms to each? and say i do that what would u guys reccomend for port in square inches?? i guess i could go 260ish" squared for port area since (8^2)x16 is like 256, and i dont wanna hear port noise due to port velocity just because port is too small or something ya kno? and why is everyone so picture crazed? its not a big deal its just pictures and when everythings done or at least close ill use my hard earned money to go out and buy a camera/video phone since everyone lives for pictures nowadays haha. just an fyi im not just some faggot that goes on this forum and asks questions and got "inspired" by steve , i mean steve is bad ass, but fuck i did my research on it and fi btl was basically the most for the money same with the amps, batterys will cost regardless and same with alternator unless i got the alt respun by an alternator speicalist.

well i dont really need 10 cu. net each sub. but im ask wat should i shoot for net cubic footage a sub? and im asking wat would the effects be of putting them in around 10 cu. ft. net a sub compared to like 7 cu. ft. a sub???

honestly no pics because i spend all the money on the equipment,so no cameraat least not yet. sorry to disapoint.. but im only a noob at designing ported enclosures. all the other stuff ive been doing for 5 yrs. i jus always bought custom boxs. but does any know if the btls will sound different if in 10cu. ft. a sub net? its just everyones got other priorites with building a ported box for em, and everyone usually asks whats the smallest you can go, or they try to fit a freakin 18 btl in there trunk.. ive just always seen everyonw put em in 7.5 net a net to 8 cu. ft. net a sub...

ok i have 2 fi btl 18's, 2 cresendo 3kwp, 2 xs power 3100's, iraggi amputator 300a, big three. i jus have NEVER heard of anyone putting an 18" btl in a 9.5NET or bigger cu. ft. box per sub everrr!! and i dont really know what optimal its gunna be daily driver, i want as much SPL AS I CAN GET AT LOWER FREQUENCIES such as, i wanted to tune port at 32hz. HOW MUCH PORT AREA PER CU. FT.? i kno im a noob i on this forum but i know wat im doin everything except box specs. i was thinking up fire subs bo dimensions, 45"width x 41" depth x 24" height INTERNTAL DIMENSIONS ARE 42"width 38"depth 21"height, btw i was going to use two layers of 3/4" mdf all way around so total of 1.5" mdf basically. and doin port at bottom horizontally firing towards hatch i was thinkin port 42"port width x 6.5" port height x twenty something port length to get me down to 32hz and i think thats around 300 cubic inches of port area. and i really need help because ive NEVER HEARD OF PEOPLE USING THESE subs daily in a hugeeee box like this with a huge port. because i see steve meade rocks 4 of em in only 20ish cu. ft.... so i need help thanks a lott in advanceee!!

hey how much would a ported, double baffled, (external dimensions 33" Depth X 23.5" Height X 45" Width) i believe that about 16 cu. ft external, with carpet, and i live in arizona so that aint far at all. ABOUT how much? BTW, what thickness of mdf would you use? do u have 1.00" mdf?

i was going to buy one but wasent sure if i needed TWO or just one. i have a yellow top under the hood. im going to be having TWO cresendo 3KWP amps and ohm load ill be running them at is 1 ohm each amp. i have 2 fi btl 18's. it will be used for daily setup so i will not just be burping the subs. EACH amp will put out around 3.5k (rms) we'll say at 13.8volts

hey how much would a ported, double baffled, (external dimensions 33" Depth X 23.5" Height X 45" Width) i believe that about 16 cu. ft external, with carpet, and i live in arizona so that aint far at all. ABOUT how much? BTW, what thickness of mdf would you use? do u have 1.00" mdf?

where do you get your boxs built at just curious.

oh and one more question since im having two btl 18's in a ported box the recommendations for one sub is 5-10 cu. ft. ,so for two subs it would be 10-20 cu.ft. now would it be ok if because port design makes internal cuft. of box around 12 cu. ft.? and would it still be considered a around a 16 cu. ft. box since its about 16 cu. ft. including the port space so basically what im asking is do you calculate the port space in with the internal box space to see how it matches up to the recommendations? thanks for all the help in advanced!!

i have two btl 18 fully loaded daily, im getting two cresendo audio 3kwp's amps, only part i dont know how and where to design the port at i want the port tuned to 32 hz, im doing the subs up firing , my external max dimensions are 45" W x 33" D x 23.5" H. i need help with port design and/or placement as in a port type crx, slot port, ect ect... which one do you guys think will have most output and will coincide with my box dimensions. . p.s. do you guys think the XS power 3100 is a good battery to run with this setup? along with the yellow top under the hood.