Jump to content


SSA Regular
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by An-i-no

  1. I'm currently tinkering with ideas for my front stage. I'm looking for a particular sound and I'm not sure how to describe it but here it goes.... I have a set of Grado Sr80i Headphones (which I HIGHLY recommend to anyone who loves music) and they have lots of....shimmer? on the high end. I want that sound for my car. I want the higher midrange to be pronounced, I want to hear the details (such as the rasp in men's voices) and I want it to be pretty loud. I have a cheap bookshelf setup in my room and it has Piezo horns in it that have the sound (as far as highs) that I'm looking for. The best I can describe it is airy, or wispy? A very exciting sound. So with that said, I really haven't listened to much, and I haven't listened to anything in a car that sounds like what I want. I've never heard a supertweeter. So, just based off of you guy's experiences, can a supertweeter give me that sound? I have a set of Hertz XL mids in the mail and from what I've read they don't sound as good crossed above 2.5khz because of the cone material and design...(blah blah blah) and I have yet to find a supertweeter that the manufacturer recommends to cross that low. They all want 3.5+ Will that be a deal breaker? Thanks for any advice.
  2. An-i-no

    Is a supertweeter for me?

    Initial budget is $150 for the pair. If I need to go a little overboard I will. I don't own the HU yet (having trouble finding one that isn't marked up like crazy) so I can't answer that in detail but I can look it up. As far as the mounting location I have my current tweet high on the doors and I like them there so I guess that's where I'd put the new one.
  3. An-i-no

    Is a supertweeter for me?

    Large format? I'm not sure what that means. I'm new to non-CA drivers. http://www.parts-exp...CAT&srchCat=454 http://www.madisound...-dome-tweeters/ http://www.madisound...tweeter-page-2/ As to which. See what you can fit, falls into budget, and perhaps find some reviews / graphs for distortion and break up. There's quite a few reviews and tests done on diyma of tweeters that might help you pick. You can also check out some reviews on http://www.zaphaudio...weetermishmash/ Thanks for the tips guys. I'll do some reading.
  4. An-i-no

    Brand Spanking New SSA Store

    Looks snazzy.
  5. An-i-no

    Is a supertweeter for me?

    Large format? I'm not sure what that means. I'm new to non-CA drivers.
  6. An-i-no

    Is a supertweeter for me?

    Hmm...after a little research I'm on your side. I don't think I want supertweets at all. My processing will come in the form of a Pioneer DEH-80PRS so ill be able to control the xover points from up front. So...I'm looking for a tweet that I can cross around 2.5khz safely
  7. An-i-no


    I have the 800.4. It looks way better in person than on the internet. It's very solid, heavy, nice fit and finish with the endcaps. The only thing that bothers me is the Power/ground/speaker terminals because they have Phillips head set screws which can strip. Great amp other than that.
  8. Well....to the first question, only pay what you think it's worth. As far as life span, the only think I would be afraid of are old subs with foam surrounds. Other than that go out and look and catch you a deal. The biggest thing about it is to KEEP LOOKING, day after day. When you're looking for used equipment you don't wanna miss out on something awesome. Oh and make sure you protect yourself during the transaction. Ask for more pictures, ask what they've run in the past (do you really want to buy a sub from someone who barely understands car audio...I don't) ask questions about the product. What you're looking for is knowledge. Unless it's a killer deal, you always want to buy from someone who knows what they have and how to use it.
  9. I can't link to C A C O from here but there is a nice ass Crossfire VR1000 for 180 that I would pick up in a heartbeat.
  10. An-i-no

    Zombie Apocolypse

    I got Dr. House, Iron Man and Scarlett Johansson I think we'd make it.
  11. Find a way to monitor the voltage at the amp's power/ground terminals. I bet my bottom dollar the voltage is doing something funky and the amp doesn't like it.
  12. Go get some from Autozone with the two bolt ends and just stack the ring terminals. That'll be way more secure than set screws, especially under the hood with all the vibrations.
  13. Disconnect the speaker wires (but leave the RCA's in) and see if it protects with the car on. If it does, disconnect the RCA's and see if it protects with the car on. If both then you may be having voltage spikes (where the voltage shoots up for a split second) which makes the amp protect. Voltage spikes won't happen on just battery power so that would make sense. The reason I want you to disconnect the speaker wires and RCA's is to eliminate those from the equation. Another user on here had issues with his BC series amp not liking high voltage.
  14. Hell naw. Power is power. 300 "class D" watts are exactly the same as 300 "class AB" watts. Your speakers dgaf lol.
  15. An-i-no

    Deep Bass

    If by deeper you mean lower then what he said. Tune lower. Deeper can mean a lot of things though so it would help if you described what you're looking for.
  16. I need a sheet of hard plastic like ABS to use in a bunch of places in my car. Does anybody know where to get anything close to that? I haven't really done any research so if anybody could point me in the right direction I would really appreciate it.
  17. You're awesome Shizzzon. Thanks.
  18. An-i-no

    ShiZZZoN's Build #2 The Epicness of 2011-2024

    That poor center console wants to kill itself already...
  19. An-i-no

    Fi N3 PRICES!!!!!???????

    So out of curiosity, what do you run now? And what are you waiting for again?
  20. An-i-no

    Ascendant going SSA style?

    Look at the difference in the size of the slug, they can't be the same model. I think that's the direction the build house (Fi) is headed. Huge bumped back plates instead of the 3rd slug. Look at the SSD, the Q, the SP4, the new Ascendant drivers. They all share that trait and personally I think it's a great idea. Product recognition is awesome because in 5-10 years, (if the hobby is still big) everybody will remember those drivers that Fi built with the big ol steel asses.
  21. An-i-no

    Recone kit for a fi bl with 4 inch coil

    A BL takes a 4" coil..weird. I'm interested, but since you've been having trouble getting the recone.. They tried it out for a while before the SP4's were out. It was an upgrade option.
  22. An-i-no

    Gotta Love Local Shops

    Ok Sencheezy instead of tuning new wire to the doors they cut the stock speaker wire behind the radio, tied new wire to it and ran that new wire to the amps. So the power goes from the amp, through the new wire and then through the stock wire to the doors. I would never do it that way but if that's all you paid for then....
  23. An-i-no

    Bassboylowg Bass-Pack #1

    If you have Audacity or Virtual DJ by any chance you can open with either of those and save it as an MP3. Not sure how it will affect the quality though. I know with VDJ you can choose to record as a 320. EDIT: Was in a different tab and got ninja'd lol
  24. An-i-no

    Fi N3 PRICES!!!!!???????

    I saw the price and was like this must be in Yen or something. Then saw the dollar sign. I think it's a great buy. Should do 180's out the box. I need Chris's input since he knows much more about the industry than anybody here. He'll definitely know if its a good deal or not.