An-i-no

So....I'm going to be there....who wants to give me a demo while I'm down there?

Is that price for each or as a pair?

Just out of curiosity, is this thread motivated by what happened at Slamology?

Sup. 375 shipped. Lower 48 ONLY Crescendo Audio C1100.4 180x4 @ 4ohm 300x4 @ 2ohm 600x2 @ 4ohm Bridged It's brand spanking new, just came in today. I'm very very against installing it, being that the guys at Crescendo personally tested it for me before shipping it out (it was a warranty return and it literally says tested for [my name] on xx/xx)But if it is DOA I'll refund you. LMK!

Because 25 to 40hz is all that matters, right? Unless you like your subs crossed at 80hz+ (which to me sounds god awful) then 25-40hz is like 90% of what a sub should be doing.

I sent my C1100.4 in on April 19th, RMA #JKC11041513. I called on May 1st, and was told that you guys had received it and that it was waiting to be benched. I called on May 8th, was told that they had benched it, and were having issues resolving the problem. I was also told that if they could not resolve the issue (channel separation) by the end of the week (I'm assuming that's Friday) that I would be sent a replacement. I called on May 14th, no answer, so I left a message. I called on May 21st, no answer, but I did not leave a message. I called on May 22nd, no answer, so I left another message. I also filled out a support ticket on May 22nd. I have not yet received a response. For some dumb reason, I forgot it was Sunday and called today. I didn't leave a message because I felt dumb. I really need my amp, or a replacement amp, or a refund. But first I need to talk to someone that's not an answering machine. Thanks in advance.

W140 is the man guys. Somebody pick up this Dcon!

Sup. I bought this nice equalizer for like 110 bucks. Except it doesn't effing fit in my dash....................so If you give me 70 bucks I'll mail it to you. It's pretty much brand new. I've only used it for like an hour at the most. I mounted it using some neato double sided tape....but I don't know if I can get all of it off, so if you buy it, know that it may come with some glue residue. You won't be able to see any of it once you install it though. If you're interested, LMK! You can save this from the pawn shop! Eclipse EQ1000 5-Band Graphic / 1-Band Parametric Equalizer/ It's one of those. It looks like this:

http://www.soundsolutionsaudio.com/forum/topic/58958-fs-ssa-zcon-18d2-410-shipped-or-350ship/ So deal?

Yes!....so even trade?

The two 125.4's. Which item are you interested in? EDIT: Please want the Zcon lol. It's killing me that I can't use this thing.

Crescendo 1100C4 or ZCON 18D2?

Trades?

So. I'm looking for a tweeter that can play pretty low (~2k and up) and I came across these and from the specs they seem to do what I want them to. They're also easier to mount than a traditional large-format tweeter. So yeah. I have these http://www.madisoundspeakerstore.com/approx-8-woofers/silver-flute-w20rc38-04-ohm-8-wool-cone/ Off axis in the doors. I like them. I couldn't really tell you why except to say that they play down to ~60hz and sound nice doing it. I know I can't cross them over very high though. So out of these two, which would work better. http://www.madisoundspeakerstore.com/horn-tweeters/audax-pr125t1-horn-tweeter/ http://www.madisoundspeakerstore.com/horn-tweeters/morel-cat378-morel-horn-tweeter/ Is the higher cost of the Morel justified? I can't find anything but positive reviews of the Morel and absolutely nothing about the Audax... Thanks in advance.

If I can go small format then high on the door slightly off axis. If I have to go large (which is what will probably happen) then low in the door on axis I was looking at the horn loaded drivers because....they play low and I can fit them a lot easier than I can a traditional large format. The added efficiency was just a bonus. What are the trade offs of the horn-loaded drivers? Besides the dip in response when placed off axis. And whooooo....those are $$$.

I have the exact same problem. No L/R separation. High pitched engine whine. Sadface.

This is one of the 18's from Lance's Yukon. I picked it up with the intentions of using it and was never able to and I need to get rid of it now haha. It is in great condition with just a few chips in the ferrite part of the motor and a small nick in the spider. It plays fine though. I'll take 410 shipped or 350+ shipping to you, whichever is less. If you're local to 76708 (Waco, TX) I'll take 325 just to save the hassle of shipping. On to the pics Small nick in the spider. Nothing big. I will take trades for a Crescendo BC2000d if we split shipping on the Zcon or a Zcon/Mayhem/BTL N2 12". I will also take a pair of Xcons or Icons + Cash. If you have any other trades just ask me. Let me know!

I think that's shipping weight (ie: sub+crate)

Oh ok. Thanks anyway.

Double post fail

Trade for a zcon 18D2?

You can afford an iPad but not $10 glue?

Sup. I had these in the doors of my Explorer. The drivers side was hit by another car and slightly (very slightly) damaged one of the mids. The basket is a little bent and the mounting hole cracked. I fixed the crack with some JB weld and bent the basket back into place as best I could. It still plays and sits 90% flush (but if you torque it down it won't leak at all.) The other mid is in great shape. Pics of Damage That's JB weld on the basket, not cracks or scratches or anything. Here's it sitting on a baffle From the side: And directly facing it And that's without any screws in the baffle so with a little torque it'll sit flush in there. 105 + Shipping to you (that's basically giving the damaged one away) Let me know people! I need some $$$

Sup... So I totaled my Explorer and broke my arm. BUT, I got a new job, got a new car, and got a (somewhat) new system. So I have two of these: Powered by this: Which is powered (in part) by this: Hooked up to the stock radio in this: And it all looks like this: The box is 4 cubes @ ~34 ish (I fuxxored the math up lol) which is a little higher than I wanted but it was as long as I could get it and still get the box in the trunk. Trunks suck ass btw. And that's my return to the land of bass. Yay.

Thanks for all the positive comments. It's good to be back.