Jump to content

cedartowndawg

Members
  • Content Count

    64
  • Joined

  • Last visited

Everything posted by cedartowndawg

  1. cedartowndawg

    How About A Joke Thread?

    Post your funnies. They don't have to be original, just something to make us giggle. I'll start off; A lawyer runs a stop sign and gets pulled over by a sheriff's deputy. He thinks that he is smarter than the deputy because he is a lawyer from New York and is certain that he has a better education than any cop from Nowhere, Tennessee. He decides to prove this to himself and have some fun at the Tennessee deputy's expense.. The deputy says, 'License and registration, please.' 'What for?' says the lawyer. The deputy says, 'You didn't come to a complete stop at the stop sign.' Then the lawyer says, 'I slowed down, and no one was coming.' 'You still didn't come to a complete stop,' Says the deputy. 'License and registration, please.' The lawyer says, 'What's the difference?' 'The difference is you have to come to complete stop, that's the law. License and registration, please!' the Deputy repeats. Lawyer says, 'If you can show me the legal difference between slow down and stop, I'll give you my license and registration; and you give me the ticket. If not, you let me go and don't give me the ticket.' 'That sounds fair. Please exit your vehicle, sir,' the deputy says. At this point, the deputy takes out his nightstick and starts beating the living shit out of the lawyer and says calmly, 'Do you want me to stop, or just slow down?'
  2. cedartowndawg

    FI AUDIO baby!'s Official Question Thread

    Yea, I just read that link. Everything I thought I knew was a lie..
  3. cedartowndawg

    09 silverado crewcab LT IAK worktruck THE REMIX

    To the kid that said something about TB spacers, get real. They obviously add over 50 horses. At each wheel! Build looks good so far though. I'm tuned in like a thirteen year old watching softcore porn on TV. Once you finish all this up, you should level it by bringing the back end down a little, those trucks look amazing like that.
  4. I've seen some pretty crazy stretches, from 10"s to around 14"s.. I'm looking on this one site and they're offering a 20" and over custom. I'm curious as to why? A 4" to around 10" I can understand because if you add power to the bike, it's gonna further space where the torque is applied and thus make it harder for it to lift the front tire. Anything over 16" is pretty much going to put completely you out behind the rear fender.. I can get for drag racing but if you're gonna do that, you're not going to worry about buying it online and you're just gonna build one from scratch that way you can get over a 330 tire and just run a drag slick for a car, not to mention that you'll probably have a wheelie bar so it will be almost pointless. I've seen people near where I live running roughly a 14" on a daily cruiser of course it had air ride on the rear swing, these were bigger guys, because they wanted to keep their ride quality and not forfeit their weight handling but never the less... When do you think too much is too much? Hit up the poll.
  5. cedartowndawg

    Alan Dante is back

    I wonder how much, if any besides the body, of the original car is left...
  6. cedartowndawg

    curved when i was trying to cut....

    Do this. Your new name is Pablo Pedro Juan Hernando Fransisco Jesus Franco Edgardo Martinez-Sanchez-Delgado-Guerrero-Alvarez. You are a drug runner for the Sinaloa cartel.
  7. cedartowndawg

    sefugi schools grasshoper

    The master has spoken. Get to work! Personally, I wanna see that bay steam cleaned while everything else is out to be wiped down with commercial grade dergreaser and then sprayed with Teflon, but that's just me..
  8. cedartowndawg

    What will my 12's meter at?

    Touch up the black paint on the port, you'll gain at the least ten deebeezz
  9. cedartowndawg

    What will my 12's meter at?

    Nah, to be honest it wasn't.. Legit guess would be.. Around high 120s maybe a 130 on the right song/test tone.
  10. cedartowndawg

    Jason Voorhees Tattoo

    The world is here. O Your talent is waayyy over there. ------------------------------------------------------------------------------------------------------------------------------------------------------------->
  11. cedartowndawg

    What will my 12's meter at?

    Oh, oh! I'll play. 120 if you're lucky.
  12. cedartowndawg

    sefugi schools grasshoper

    Judging by the shifter box, it's still an automatic. Since you're doing all this work, why not convert it to manual at the same time?
  13. cedartowndawg

    Why Not Asphalt?

    Ah, thank you for the clarification, Impious. I guess I misunderstood the part about mass loading and stiffening. And actually no, Don, I misrepresented, I guess that's the best way to put it because I completely missed the boat, what I was talking about. I looked up the stuff from the video I saw on it and it's called Peel & Seal. A quick search on Lowes tells me that it's aluminum roll roofing. I'm a bit unsure of that but a roll of three feet by thirty three and a half weighs in at only thirty two pounds. So at 32lbs / 100.5 sqft, less than a third of a pound per square foot. So it seems that it would only stiffen and not so much add mass with that distribution, am I right with that? Definitely doesn't seem like a good idea to me, but then again, I only now have a very limited understanding so feel free to correct if need be. Here's a linky to it if you're interested; http://www.lowes.com/ProductDisplay?partNumber=154032-81326-PS36&catalogId=10051&storeId=10151&langId=-1&productId=3090099
  14. cedartowndawg

    Bass terrorist gets what he deserves!

    How the hell did he get it all the way over there.. He musta been flying..
  15. cedartowndawg

    Why Not Asphalt?

    Good read, very informative without being boring. +1 to you, sir. I do have a question but I'm not sure how well it would fit into this. Weather stripping? I'm not sure if it's asphalt based or what but I've heard of a few people using this with supposedly great results. But it seems like it would only add mass since it's not meant for this line of business and like you said, raise the resonant frequency. Thoughts?
  16. cedartowndawg

    Bass terrorist gets what he deserves!

    *Mandark laugh* I love justice. Was the truck okay?
  17. cedartowndawg

    Anyway to fix this...

    I did not even notice that it was only the cap.. Just do what Shizz said.. You can even order custom ones, but those will be a few dollars more.
  18. cedartowndawg

    Amp / sub compatibility question

    I would do a run of 1/0 that way if you upgrade, like Notorious said, you'll want to eventually. 4 wouldn't starve the amp or anything but if you upgraded to something with more draw, it just wouldn't hold up. Have you done the big three yet?
  19. cedartowndawg

    Anyway to fix this...

    Okay, we can't link to them.. That's new.. Just Google it, first result gave me; Recone kit designed for a 2003-2008 RE Audio SX 12" with 12 spoke basket. This kit has sewn on leads, which will eliminate one of the most common failures of the SX, burnt leads. Kit uses a Dual 2 ohm, 8 layer flatwound aluminum coil. Designed to retain factory T/S parameters. Comes with a 6" poly dustcap w/ PSI logo. DOES NOT INCLUDE ADHESIVE, order separately. You will need 2oz CA and 2oz rubber adhesive. Can't link to it but that's the specs they give.
  20. cedartowndawg

    sefugi schools grasshoper

    I'm not a Chevy man but...
  21. Just heard about a ninety four year old man being beat by two boys, one was eleven and the others age wasn't said, with a rock.. What the fuck..

    1. porkchop

      porkchop

      x2 across the world bro, wtf indeed... sad times .

    2. Sir-Lancelot

      Sir-Lancelot

      That is truly sad. What sort of punk could do such a thing?

    3. cedartowndawg

      cedartowndawg

      Just got back to my profile and from what I remember them saying on the news, some sort of gang activity was involved. It's still really sad.

  22. cedartowndawg

    Epic Craigslist Fail

    Fail because he only wants 1k for 'er.. I would do some terribly nasty things to that trunk if I had the money.. Fail because it's camouflaged and the amp is "built in" by being screwed on. Oh, and Pioneer Kickers...
  23. cedartowndawg

    Craig's list stuff

  24. Whoa, never noticed this before..

    1. sefugi

      sefugi

      Cool Stuff!!

    2. Mark LaFountain

      Mark LaFountain

      it's pretty neat for sure.

  25. cedartowndawg

    Company Car

    No, seriously.. They're relatively low to the ground so they catch noise from there and they're stupidly light so there's not a lot to stop the noise.. Both road or engine, from what I've heard and read.. I think it would be damn impressive to see a tiny ass Smart Car quiet down to a luxury car level and be able throw up some half decent numbers, certainly it wouldn't be 150s or anything but I think it would honestly be impressive.. And if they ever wanted to take it to shows, it'd get great mileage... Just my opinion..
×