2Loud

I'm looking for suggestions on new mids for my 2010 silverado ext cab. I haven't done much to the truck yet just trying to decide on mids. The ill decide on power and tweeters. I like my music super loud. My setup in my car consists of 4 selenium st200s and 4 crescendo 6.5s off the factory amp. Lol and that sounds perfect to me. I'm trying to keep my budget as low as possible like 40 bucks a driver. I know I don't have enough details for you guys but bare with me and give me some suggestions! Thanks

Hey! Thanks for talking shit when you have no details of what I have. Your are wonderful.

Sweet! much respect for this guy even if he did or didnt build this it show nothing can stop him.

STILL HAVE?

1. Product: 18" PSI Platform 3 18 w/ cf dust cap 2. Specs: DUAL 2 T/S Parameters for standard Platform 3 18": Revc = 2.7 ohms Fms = 27.4 Hz Qes = 0.45 Qms = 4.8 Qts = 0.41 Sd = 1217cm^2 Vas = 5206 L BL = 19.5 Mms = 343.3 g Sensitivity = 91.4 dB @1W/1m Sensitivity = 96.0 dB @2.83Vrms/1m Xmax = 60mm total Usable excursion = 3.5" total! Xmax = 60mm total Usable excursion = 3.5" total Product Dimensions: Overall diameter - 18.5" w/ gasket Cutout Diameter - 16.75" Mounting Depth - 9.75" Displacement in enclosure - .25 ft^3 Weight - ? lbs http://psicaraudio.com/products-page/platform-3-subwoofers/18%E2%80%B3-platform-3-subwoofer-2/ 3. Description/Condition: it is in great condition and sounds amazing. i absolutly hate the fact of selling it but i have to for many reasons. still is in the break in stage and was only ran on a aq 1200d, it has scuffs on the mounting holes thats it. 4. Price: 325$ + shipping obo 5. Pictures: will have more pictures with my name in them tomorrow when its light out. thanks

I'm looking for some decent size motors. 3+ inch coil. Let me know what you have!

hello people, im looking for help on choosing a 6.5 componet set for my 05 grand am. im mainly looking for sq with very clean highs with a good amount of midrange aswell. i will be running a amp to these once i figure out what type of set i go with. my budget is around 200 or less. thanks

im trying for find a good budget setup my budgets about 100-200$ in the substage im aiming towards more of sq i have an hifonics 2400

brz 2400? yes its a brz 2400. my budget has changed to 300-400 bucks. i listen to mostly hiphop/rap sometimes rock. i have a sheet of birch and about 5 cubes to playwith. thanks to everyone that was trying to help

i need my dingleberrys plucked too, to everyone that was being a douche go fuck yourself. im so sick of ssa due to fact the people gotta be arsehos about everything. so what if didnt post alot of info. it was a quick post before i went into work IM pucking SORRY

Pioneer, Alpine

I have a sundown e8 v2 motor and basket will sell super cheap!

So i made a 4th order bandPass for 2 obsidian 12s out of birch. I started sanding the enclosure and filled it all the screw holes sanded all those spots with 60/120/220 grit sand paper everythings smooth(so i thought) i started painting the enclosure with kryole dual primer and paint(spray can) i thought it would be good to use that lol well im pretty stupid to think that was gonna work great. The corners are very dull along wIth the edges that are sanded and the top and sides are super shiny and it looks like shit. Whats a good paint to use to paint birch with and have it turn out super glossy. My goal is to have it very glossy and not be able to see with the edges meet and not tell they are sanded.

Help people

i dont know if this is the right section but i was wondering whats a good filler to cover screw holes on the outside of an enclosure before painting the enclosure? i made a box out of birch. i want to have a high gloss finish after i paint it with no screws showing. thanks

sounds good. what would you guys recommend for cheap high gloss paint?

thats what i was thinking too but wasnt sure if it would crack or anything im kinda new to accually caring what the enclosure looks like lol

im looking for a beefy 12 basket and/or motor. please pm me.

http://www.crescendoaudio.com/index.html Navid should help yah out. thanks a bunch man!

how can i order one of these?

Will trade for smaller?

Haha thats awsome

Price?

specs and price?

im lookin to start a new build and try doing a wall. i know i shouldnt be doing this myself but the only way to learn it to ask a ton of questions and do it yourself. im not sure on the best/proper way to safely secure a wall. the walls gonna be for 2 psi platform 3s which arent too light. i just dont want the wall crushing me if i ever get into an accident. thanks.