burko

Well, it's officially February 2013. Any news?

Sure thing! Any idea when they'll be back in stock?

Just curious why the SSA store has the 311 and 312 models but not the 313. I could order from Summit or Jegs, but hey, support the forum right?

http://www.soundsolutionsaudio.com/forum/topic/3704-how-to-set-your-amplifier-gain/

Got it in and I sit on around 14.9 when cold and 14.5-14.6 when warm. never drops into the 13s even at full tilt while idleing. Very pleased.

8 12s is a LOT different than one 18... If you're looking to keep the box below window level you're not gonna have a ton of room to work with after batteries, amplifiers, and room for wiring (and any other small thing you may run into).

Tuned in!

So you think an isolator would solve the problem? Could you suggest a brand? Don't want to pick up a shitty eBay one. ?? Don't by a scosche, there useless. And an isolator won't solve the problem, but will be a possible bandaid Well do you have a suggestion that could fix my problem?

I can haz info?

So you think an isolator would solve the problem? Could you suggest a brand? Don't want to pick up a shitty eBay one. ??

So you think an isolator would solve the problem? Could you suggest a brand? Don't want to pick up a shitty eBay one.

I had the Addictive Audio 10.4 (115x4 @ 4 ohms) screwed into the box playing the 2 Selenium 6W4Ps active fine for a while. I started getting a static sound from the speakers, when I noticed that nearly all (7 out of 8) screws that hold the casing of the amplifier to the internals had stripped out and was barely hanging on for dear life. I took the amp off the box and took it inside to have a look, and didn't see anything out of the ordinary. That being said, I have no idea what I'm looking at, but there were no loose wires, no solder points that had failed, etc. I gave it another try and set it on the floor of the truck beside the AQ2200D, wired it all up, played fine for a while, then did the same thing. I noticed that if I bumped the amp a certain way, smacked the RCAs, touched it to the 2200, etc, it would resume playing normally, only to fade away to static within 30 seconds, which I thought was weird. Anyone have an idea? Maybe a ground wire or something?

Googling "class F amplifier" ftl..

No I dont I just want a good sq 6.5 coaxial.

Just read all 6 pages. I'll be sure not to buy one.