snb778

alright, well i'll give it a try when I have some time.. workin through the weekend.. hope to see some people at Sundays meet in IL. thanks for the help!

Hey guys whats up I am looking for suggestions.. I am very open to Ideas. I have an 18" Q in a 7.1cu. ft. enclosure running @2 ohms on 2000W rated...bout 3/5gain... 3x 4" Aero's, all 14" long. Its in a 99Nissan Maxima I am pretty happy with its performance, but I am looking for just a little wiggle room, and right now when im playin the Q at max volume, is where I want my wiggle room, so......I don't know if I should try tuning a little higher to get a little more output, or if im choking my trunk.... I was thinking of a few other ideas... trade the Q and get A. and HDC318( if they makeone) B. An 18" BTL C. 18" RE MT D. 2x 15" Q's (if i have enough room to port them) E. 4x 10" _____ cheaper subs and seal em as I said, im open to suggestions, so im just throwing out ideas. I don't want to spend much more money though after I sell this Q for hopefully about 300, so add another 100 bucks or so. HELP ME OUT! Thanks!

Hey guys Im going to build a new box for my 18" Q. I have 6.7cu. ft. before disp. and port.. which I know is small, which is why I need to use aero's. Right now I have 4x 4"x10" aero ports. can someone give me recommendations. Do I need to get 6" ports?? I know for port area that 2 of these 4" aero's isnt enough, but I think if I go to 3, mine are to short... Can I use the flares, and use PVC pipe to make them longer??

im going to try a new box first.. I gotta get together with some guys in my area...have them take a look, get it on the meter (i do care to an extent what numbers I can do... I dont wanna be sub 140's) but as far as another q18... don't have the money

is 2 12" subs really downgrading in cone area?? someone told me that... anybody know some pairs of 15's that would work in 7.1cu. ft NET.?? someone has said 2 15" Q's could work...nightshades are to expensive or should I try to 15" BTL or 18" HDC3 SPL15 or 18 MT18 4x 10" cheap subs sealed... throw em at me

the only thing I found was how much port someone gave an 18 in a 6.? cu. ft box... didnt find anything about how much it wants

I dont mind losing low end if I can get more output... Im only running @ 2 ohms now.. I could drop to 1 and get an EST> 3000W which I would HOPE is enough for a 15" BTL.. if not comfortable for an 18"... but I dunno if I have proper space for an 18 thats what Precisions Ports website told me to give it... Its SOOOOOOOOO frusterating.. I PM'ed both guys at FI and asked them about the port.. I made a thread on this site AND CA.com asking for help with the port.. Nobody wanted to help me out so.... I dunno what to do.. Yea I can build another box ported differently, but I can't find the help I need. You think I would be better of running a 15" w/ a bigger box and bigger port IF a new box for the Q w/ more port doesnt work?? Or go down to 2 12's someone said 2 15" Q's would work in 7.1 cu. ft...??

to much over budget.. I have about 400 bucks to work with... i'd go to about 450MAX someone... anyone.. please throw out some suggestions... I jsut took a vid.. i'll get it up tomorrow... Not as much flexing as my last setup w/ the 2 15" R's... but it sounds louder... which is ok with me, i jsut want a little bit more output... I would just think w/ the 3x 4" aero's this thing would more more air than my last setup

I have been searching around for a decent sounding 18" sub...and I wanted to compare the RL-s with the Havoc (even though there is no 18" RL-s)...regardless... why does it seem like everyone goes with the RLp instead of the RL-s?? Kinda confused me... is the RLs more SPL oriented?? also if anyone has a good suggestions for a nice sounding LSQ 18" sub that can take about 2k+ please let me know, cause im having a hard time finding one myself...its either that, or 2 12's... I would like something that I can use sealed, but also ported...Hence why I was looking at the Havoc, but it has limited power handling it seems. Thx

ok, so I have room to do 7.1cu. ft. after Displ. SO, if I wanted to do 3x 4" ports, how long do they need to be for 30Hz? I need 94cu.in. of port I think.

ttt... this is great

ok, forget all the detailed crap since nobody wants to chime in... 6.7 cu. ft. 2x 4" Aero's... Tuned to 30 hz... How long do they need to be FOR THIS SUB.. FI-guys... feel free to help out or im just going to have to email ya

bump again.... still tryin to figure out how much port I even need for this sub.... can I use those cardboard tubes and just cover it in resin to make it solid?? vs. using PVC... I kinda want to make a 10 or 12" port someone please help! i want to get this goin

anyone else... could I just use 2x 6" aero's??

any of you 4 watchin... please drop in some advice if you are informed on the subject

well after port and disp. I figured i'd be at about 6.4-6.5 cu. ft. a 15" wouldn't give me the output im looking for. Thats why I want to go ported with what I have.. not quite there yet for my preferences... actually it can get there, but its pretty much maxed out at that point. I am going to go with 3x 4" aero's, w/ PVC in the middle... I just don't know how much port to use????

17 views and no help...??

anyone.... I could use some help here... people say don't use PVC because it isnt flared right??

whats the net volume of his box now?? 2.9cu. ft. your recommending for an 18"btl??

those internal dimensions do NOT look like 7.2 cu. ft.

I am looking to get one of these projectors in the next week... getting the basement dry walled in the next few days here So far I am lookin at these 4. Mitsubishi HL5000BL $2300 http://www.projectorcentral.com/Mitsubishi-HC5000BL.htm Optoma HD80 $2700 http://projectorpeople.com/projectors/projspec.asp?itemid=22991&itmname=Optoma%20HD80 Sony VPL-VW40 $3000 http://www.sonystyle.com/webapp/wcs/stores...552921665307855 and the Optoma HD65 $1000 that comes with a screen http://www.costco.com/Browse/Product.aspx?...314&topnav= any help would be great

ttt

anybody know anything about that SXRD technology that the sony uses??

wow...thats a nice site... HAHAH anybody know whats more important.. Lumens or Contrast ratio, or have any input on why they would get one vs the other.. I def. like the Automatic focus that 2/4 have

I have an upgraded alt. to 180A (i know not much, but all I could get with my car) BIG 3 are done... 2 extra batts. in the trunk.... I wake up yesterday, and for the first time ever my battery light AND brake light are on, so I'm like wtf.... to coincidental, must be something stupid that needs to be re-set... I just went out there and tested my battery.. With car ON, it reads 12.35, car OFF 12.45....... I reved the engine with the car on and it went up like .2-.3 ANybody know what this indicates...whether it means bad battery, or bad Alt.....???? Battery is only 2 months old PLEASE HELP! Just spent like 600 on electrical upgrades not to long ago