CarlosRodriguez

on to the BOXXX lol going to be galssing the inside with resin and fiberglass mat soon for now there going in my ol box

thanks i just hope my amps can push them for now till i can afford to sound deaden my trunk and floor then ill be on a mission to order something bigger or even run 4 of the amps instead of the two that i have

Thanks Boss hopefully Yes for the time being ive herd some people say its not enough some say it is if needed i can order another and switch up box designs or something will be tune to 5 cf 29 hz subs forward port driver side rear if there is port noise and or poor performance i know right i hate to see what happens when they are loading and unloading them but that aside they only traveled a very sort distance so i hope all is well

the zcon Have Arrived although i seen the Dam ups guy drop it off his truck from the top step in the front it rolled and my heart Dropped but i inspected it and its seem a ok here are some pictures didnt know to start a build log or maybe a mod can move thiss?? anyways onto the pics of the new STUFF lol New New radio lol and a 6 inch aero new box being built tomorrow

Hey guys i know i may sound like a straight noob i apologize before hand but this is really driving me crazy!! I have gone step by step one for one and have isolated that the radio is the cause of the issue or the alternator, i have tried running new rca's from the head unit, ive tried pulling the eq out of the equation but still the same noise. I have tried different radios: older alpine 9887 or something like that, a walmart pioneer deck, and just today an alpine cde-123 and still the same thing!! I have two ground points from the alt to the strut tower and 2/0 from the batteries to the factory rear ground post. Tomorrow when i get home from work im going to run 2 ground leads ( just got more wire in) i have tried running a power/ ground 16 gauge wire from the rear amp distro block to the radio / eq and same deal. I also tried a new harness and even tried grounding by the firewall Im trying to avoid using a ground loop isolator but it seems like the only hope i have in a quite system P.S I also tried grounding the pioneer deck at the rcas and same thing help!! plz

Hey Aaron would you be able to check on these two orders for me please getting all antsy in my pants lol # 3359, # 3357

#2585, #3359, #3357

very nice i think im going to hav to pick up a few can up that great stuff have you ever tryed the black one ? its supposed to expand more

the ohm load would have to end up being a choice of having one or two btls. also how loud are you trying to get ? how much space for a box do you have whats your budget? how much power do you want to run ? is it a trunk car or wall or back seat as for where the box is going to go

is there like a chart or maybe a rule of thumb for power vs wire size ratings?

i play my sa -12s around 31 hz tuning bass mechanic drops real low you should be alright and theres a write up some where around here ill see if i can find it real quick with a dmm http://www.club3g.com/forum/car-audio-electronics/120365-how-properly-set-your-amplifier-gains-using-dmm-method-please-sticky.html

I'm thinking this is going to be the next box any input suggestions? Also this box will be fiber glassed inside, resin a matt gross volume 7.18 port area 70 in^2 port area per ft 12.30 in^2 net volume 5.69 (2.845 per sub) tune 37.62 hz

then again i dont think he was putting a hell of alot of power to his sub lolol two dc 5ks i think he said he had a bl but none the less im sure it should be able to take that amp np..

thats a nice looking box and especially for your second one lol i member when i was 14 and making a ported box 3/4 inch ports homedepot carpet ahh good old times held together with screws and silicon lol

Thanks I hope I can get it louder at least a lil bit ..