Jump to content

SteveCasbeer

Members
  • Content Count

    102
  • Joined

  • Last visited

Everything posted by SteveCasbeer

  1. SteveCasbeer

    37612_543932488492_72106213_31661543_3664228_s.jpg

    Crap plastic spacers again. Big difference. By using the 1" thick MDF spacers it moved the speaker closer to the speaker grill on the door panel. Overall I can tell it sounds nicer also.
  2. SteveCasbeer

    47914_546530911232_72106213_31739298_78529_s.jpg

    Me riggin somethin up so I could set the microphone where it needed to be.
  3. SteveCasbeer

    47914_546530916222_72106213_31739299_3390327_s.jpg

    More screen shots of the Imprint software doing its thing.
  4. SteveCasbeer

    60214_548007048042_72106213_31775605_3433209_s.jpg

    Close to being finished with the driver side door. I got some secrets still. Then she will be finished soon.
  5. SteveCasbeer

    47914_546530921212_72106213_31739300_5657130_s.jpg

    In this picture you see two representations of frequency response. The top line is the frequency response of my Nissan Sentra. The bottom line are the corrections made.
  6. SteveCasbeer

    47485_546532004042_72106213_31739309_5528105_s.jpg

    On the right is a picture of the Audio Processor. I know you couldn't see it well being installed where it is in the car. On the left it just the software and the microphone. Those were two separate kits I had to buy. They didnt come together
  7. SteveCasbeer

    223062_575490930122_72106213_32054322_831318_s.jpg

    Getting close to being done. Project this time was upgrading all factory grounds with the 0/1 Gauge wire. Also running the 1/0 Gauge from the alternator the the positive of the battery.
  8. SteveCasbeer

    224718_575399134082_72106213_32053048_5048327_s.jpg

    Size comparison of the wires.
  9. SteveCasbeer

    224718_575399134082_72106213_32053048_5048327_s.jpg

    Nice new ring terminals on the end of the power and ground 1/0 gauge wires.
  10. SteveCasbeer

    216280_575399114122_72106213_32053046_4143043_s.jpg

    New wireing for the sentra. Red and Black wire is 0/1 gauge capable of 300+ amps of current. Top right is 10 gauge speaker wire. Bottom right is 12 gauge speaker wire.
  11. SteveCasbeer

    222866_575490980022_72106213_32054326_3927279_s.jpg

    Transmission grounding point.
  12. SteveCasbeer

    222570_575491019942_72106213_32054329_5385186_s.jpg

    Chassis grounding point.
  13. SteveCasbeer

    217138_575491039902_72106213_32054331_1050967_s.jpg

    Fray the end of the wire over the fitting and then screw it into the grounding block and that thing will never pull out.
×