SteveCasbeer
-
Content Count
102 -
Joined
-
Last visited
Image Comments posted by SteveCasbeer
-
-
Nice new ring terminals on the end of the power and ground 1/0 gauge wires.
0 -
New wireing for the sentra. Red and Black wire is 0/1 gauge capable of 300+ amps of current. Top right is 10 gauge speaker wire. Bottom right is 12 gauge speaker wire.
0 -
Transmission grounding point.
0 -
Chassis grounding point.
0 -
Fray the end of the wire over the fitting and then screw it into the grounding block and that thing will never pull out.
0 -
Compression fitting for the 0/1 gauge wire for the grounding block.
0 -
Three grounding points: Strut Tower, Chassis, Transmission. All main factory grounds replaced.
0 -
Work completed. Took around 3-4 hours to complete the job. Voltage holds 13+ volts at idle with the stereo at full tilt now. Voltage levels were dropping below 12v with the system playing before the upgrades with inconsistent voltage readings. I will have to take some readings with the car off and see what I get.
0 -
Sundown and Polk Audio Amp mounted. All the wires organized.
0 -
Custom box for the sentra with the W6's
0 -
Sound deadening in the entire trunk.
0 -
Nice clean install of the stereo finally!
0
224718_575399134082_72106213_32053048_5048327_s.jpg
in Members Gallery
2Posted
Size comparison of the wires.