Redline_Customs

I'm looking for something that sounds good but doesn't break the bank. They will be getting 50-60 watts per side. Zapco i-6.2 http://www.woofersetc.com/p4965/i62--Zapco-65"-IForce-Component-Speakers.htm Image Dynamics CTX65CS http://www.woofersetc.com/p6201/CTX65CS--Image-Dynamics-65"-Component-Speaker-System.htm Or if you can recommend something else better in that price range. Thanks

Looks like fun. I wish I could have been there.

Make sure your volt meter is wired correctly. If its the stinger one with 3 wires (black blue and red) if you wire the red and the blue backwards, you voltage wont dip more than 2 tenths.

Thats a nice score for a SQ guy.

It should be a blast!

Excellent response! So basically I'm damned if I do and I'm damned if I don't. I'm trying to get away from the slot ports all together. I feel aero ports are more efficient, look better, sound better and are a lot easier to use. So Scott, I am pretty open to what I can do (space wise) what would be your reccomendation for the best output. Thanks for the input. Josh

I plan on running 8 ssd 10's. 2 per box at 500 watts rms each. Each box will be 3 cubes before displacement tuned to 33hz. I plan on running 1 4" aero port per 2 subs. Do you think I will get port noise with that size port on only 500 watts? Thanks, I hope that wasn't too confusing.

You the same "Redline" that made the shift boot and armrest for my Mustang? If so, guys, these dudes do amazing work with leather. Not the same ones.

When you leave your handtruck out front for the UPS man. When the UPS man knows you so well that he will park in your driveway and come in for a drink. When you house looks more like a Pawn Shop than a house When you wife/girlfriend asks you to move a sub because its to heavy to lift. When you have a cardboard box that weighs over 100 lbs and all it has in it is the "extra" wire.

PPI flat piston and the original Orion HCCA's.

Thanks Scott! You rock and NDMstang65, thanks for the quick response. Josh

I cant really check that properly because the recone isnt glued in yet. Honestly I dont see how they would work, just judging bay all the other woofers I have. Most of the tensils curve before getting to the post. In the pics I posted it hard to tell but the tensils are straight. Hope this clears it up a little more. Is there any way of extending them?

I recently bought a recone for my HCCA 15 and I think the leads are too short for me to use. Is it usual for the leads to only go past the spider by 1"? Let me know what I can do about this. I have included a couple pics so you can see what I am talking about. Thanks!