Jump to content

srd150

Members
  • Content Count

    135
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by srd150

  1. srd150

    small vbelt pulley ans nut

    http://m1082.photobucket.com/albums/srd150/Snapbucket/?pbauth=1_uLEBonVPfaLdh1h3YMYz2ZNzphABrv9Rxs4%2FD7z%2FQa5DXxJWnHGAz3igG%2FVa1V4gOPAXInp5cfsELpFOKHApAp2w7R2GkPlGRFrIapTzD57vrkbPN%2FGPO5spDrLkMQQ8NgkFhbXl%2Bpec%2Flu5AGSjPBpHLajvsTcx Or this one...
  2. I'm leaning toward a Zcon 18. But , I have a few questions. First, would the z work in a fiberglass enclosure? I would like it to be an aesthetically pleasing enclosure as well as perform. Just want to make sure that beast won't destroy my box. Second, I listen to everything and was wondering if the z will keep up with all my music choices? Not really chasing numbers but, wouldn't mind doing well if I chose to enter a comp. It's going in a 91 dodge ramcharger. Will be powered by 2 planet audio ac5000.1d's ( 1600W rms each) strapped.
  3. srd150

    is bigger better

    Remember, that's only your system drawing that much power. You also have all of the other accessories going draw on that too. Anyone correct me if I'm wrong but, my opinion would be shoot over. More spent now could save you from spending way more later.
  4. srd150

    small vbelt pulley ans nut

    let me know if the link doesnt work. i'll figure something else out
  5. srd150

    Alton's build log

    I love the glass in it man. Looks great.
  6. srd150

    small vbelt pulley ans nut

    Sure, soon as I get off work ill snap one.
  7. I've looked around a bit and could not find a small v belt pulley for my Denso alt. 3/8 shaft I believe. Looking for something in like the 2 " range. Anyone know where I can get one? Need the right nut for it.too.
  8. well i am looking for a double v pulley. those all seem to be serpentine.
  9. It's been on charge since about 6 pm yesterday. ( charger will kick off when its done), ill pull it off when I get off work. Test it ( for a base), then test it again tomorrow morning. Thanks for all the help.
  10. I took my red top out an put in my yellow top( got it for 50 bucks). I thought maybe my red one was going bad. Buddy of mine put his meter on it. It showed 12.63v ( that was about 15 min after shut off). I took it out ( a day later) and measured again 12.63v. So, i wait one more day 12.63v . My buddy said that 12.63 was low for those ( should be around 13.3 according to him). what do you think? Is it going bad, should i wait a bit longer and see if it drops or just run it with the yellow top (parallel)? thanks
  11. Dads got on that starts high, then drops off then shuts off. Not digital but works great
  12. yeah its a couple years old. i bought the yellow so i could run with the red. i'll put in on charger with the trickle charger. til i get off in the morning ( 3rd shift). then i'll see where its at and hopefully by friday i can have two batts wired up. thanks!!!
  13. srd150

    small vbelt pulley ans nut

    I bought this before i found this forum. Or, i would have called you guys. Think my results would have been a lot better.
  14. srd150

    small vbelt pulley ans nut

    BTW this is on a 1991 dodge ramcharger.
  15. srd150

    mofo

    Yeah my wife doesn't touch the dishes LOL
  16. srd150

    mofo

    I know PA mofo's aren't all that. But guy at work has one supposedly barely used that I can get for 40 bucks til I can swing my Zcon. Think I should pick it up or just pass? It's a 12 BTW.
  17. srd150

    mofo

    Yeah, I'm not gonna buy that. The surround is all messed up. Improper storage.
  18. srd150

    mofo

    Soon as I check it out ill decide. Watts, that's a good point as well.
  19. srd150

    mofo

    That's kinda what I thought. Cause I have abox and an amp. Thanks
  20. srd150

    thinking about a zcon 18

    @ Alton You got it soon as its done you'll be one of the first to know
  21. srd150

    thinking about a zcon 18

    Great then its not a matter of if , but when ill be able to get it. If my buddy and I get these couple jobs lined out( starting our own business), then it'll be sooner than later. BTW, have you guys thought about making amps too. We need some more US quality amps. That's one of the huge selling points for me on the subs you produce. Not trying to rock the boat but it would be cool, no?
  22. srd150

    thinking about a zcon 18

    A beauty panel would be fine by me. Plus I could still BEAT DOWN the block while I construct the panel. Now on another note ( pun totally intended), friend of mine mentioned aiming the sub 45 degrees to the rear hatch. So that it bounces from the hatch, to the roof, then it donkey punches me in the back of the head (as it were). Would this really have a positive effect on my numbers( or my all out experience)?
  23. srd150

    thinking about a zcon 18

    If I build it you will come lol
  24. srd150

    So my car got stolen..

    My insurance with state farm only covers parts not attached to or in the vehicle( homeowners that is). Had to get comp on my major project even though it was in the garage.
  25. Well, idle speed is up. But man it seems like it fast in park. Still not thrilled though. With lights on in gear it is dropping from 14.38 to 13. Anyone know who I could get a pulley and a new nut for it?running a castle nut right now. Old one stripped out.
×