liam_b

thanks bud well a little video from yesterday I think we might need to get the stripper pole inside asap 12-16mm of deadening isn't holding up to well http://www.facebook.com/photo.php?v=10151695267410763&l=5526063826142189557

a little vid wasn't full tilt and tunning it as 34hz not the 29hz its going to be quite windy

thanks guys amps seem to be running very well even with my dropping them down to 11s (car still has standard 70amp alt at the moment) well about time I updated this car had mot today only a cuple things that have failed mainly due to bits being robbed off it but easy fix so mot pretty much sorted I havnt had much time to work on the c2 due to family problems so for mod nats it wont look pretty but aslong as it has bass I will be happy 34hz without front end of port mosconi 4 to 6 and epic fitted 36mm birch ply and 50x50x6mm angle iron this shouldnt flex seat belts fitted bass over leg space

update time only 5 days until it has to be playing

thanks guys well I have lots and lots of pics to post but I will still off with a cuple until tomorrow

thanks guys heres another little update getting there just needs side skirts, door lock, wheels and the roof ect wraping plus we will be changing the lights for tinted ones got a little delivery 8 amps 9,000rms for the c2 and 3,500rms for my saxo next step carry on with the audio on the c2

well cuple more bits been going on car is now ready for paint and the main box is nearly done just a little more steel todo then cuple coats of fiberglass once thats done i can get the tunnel finished and get it in the car for good and get it fully sealed up and start running wiring think we are going to go for the brushed look as not a fan of the bling bling polished look not sure what the plan for the roof is might wrap it in matt black well little teaser as the pics aint great but will get some decent pics once i put the car back together and it isnt dark the blue is brighter in person

steel bracing on all 8 corners car is in primer at last smoothed off the fog lights 3liters of fiberglass and resin mix in the whole top half of door bus bar finally done might give it a polish when i have time just need need to make perspex box for it now now this is the reason you dont leave the keys in the car i leave the car is reverse as it has no hand brake. duncan decided to start the car it shoot back 10ft into 10 of the subs and a wall : damage to the car damage to 1 sub funny how the subs aint even in the car yet and there destroying it :L

thanks yep port area will be fine have around 8sqin i think most of the street bassers in the uk run between 6-10 but im building it so i can change area and length without to much bother just a normal ported design but the tunnel helps with loading and they have a nice sound to them thanks dude

time to start fiberglassing now going todo the corners where the car is 1st then im going todo the whole inside of the box

hopfully one more skim and that side is done rear panels made and worked out the amp layout can now fit a 7th and 3rd 3100d if we need to time to start getting the box sealed

another update door speakers

thanks people car is on coil overs and might use spring helpers on the back

haha i have todo a rebuild on mine at some point and thats fitting 4 18 btl neo 2s in a car even smaller than this one thanks people will get some more pictures up in a mo