sps1989

I think I might have to wait for the sa-8 v2 to be released

You will be dearly missed until you are back again, bigger and badder than ever.

Well I could not ever find what it was. And the store says they are out now. Any other suggestions?

I have been wondering about those. Whats the rms for them?

What do would yall do for just one of them? Either the level 4 or xl on the bc2000

Sounds good. Thanks man. I will have to try it out

Well I already have the 12s. But I may sell or trade them

I listen to whatever really but rap/ hip hop more than others. I have the crescendo bc2000 I have done the big 3, put a stinger spp1500d under the hood, and ran it all in 1/0 I want to run .5 ohm cuz I don't want to get another amp and thats the closest I can get to the rms of each sub. And its probably gonna be temporary

Which port, on average, is after for spl? What is the major goods and bads of each? I will be using 1 maybe 2 dc xl 12s and then later 3 level 2 8s or sa-8s.

If anyone is interested in one or both of these subs just message me and I'll give you the details

I have a dc level 4 12 with level 5 dual 1.4 coils and a xl 12 with dual 2 coils. I am wandering if i can wire them together and have them in the same box? If so what would the ohm load be when wired together?

Or maybe the singer 270. Has anyone used any of the singer alts?

I have a 2002 Chevy Silverado 1500HD that I have added the big 3 in 1/0 and a stinger spp1500d to. Inside I have a crescendo bc2000 powering a dc xl 12 d2 and a merlon meam50.4 powering my components and coaxials. While playing music with the bass up the low notes make the voltage drop. Sometimes down to the mid 12s from about 14.18. What can I do to fix this? Would an alt be the best way to go? If so what size and brand do i need? Also has anyone messed with the alts on dbelectrical.com?

Any ideas on port and sub location and direction?

Has anyone used these alts? Anyone used them on a Silverado with the 6.0L? How do they compare to other big brands?

Thanks man. I will have to try this out

Yeah it should be around that. I have had it at 2600 at .5 ohms. And I want it for daily but to be able to do comps when possible. And it 4 cubes after displacement?

I believe I got it now. Must have been a bad connection. Now its about 3/4 gain with no boost and pushing about 1700 watts

i am using a dmm to tune my amp. and the voltage i am supposed to reach is 38.73 for 1500 watts. the first time i tried i got it by maxing out the gain and then some bass boost. i have the hu at 32 out of 42 and all eq settings at 0. but i adjusted the frequency and tried again and now i can get it back up as high as it was even when putting it back where it was before. whats the problem? and where should i have my bass knob set at while tuning it? i have done the big 3 and have a stinger spp1500d under the hood with 1/0 running to the amp and have a power acoustik ptid-8310nrbt radio and am going to be using a dc xl 12 if this helps any

I think I'm gonna go with either a mechman or dc power 270

Thanks guys. Once I get enough posts one will be on here fst

Ok so if i have them in 2 separate enclosures or maybe one that is divided and if i get them both wired to 1 ohm and then wired them together at .5 ohm, they would do ok. And they both have a rms of 1500. Would they sound ok?

Or if i get a recone kit for one of them, are they close enough to run them together?

I'm on a kind of tight budget so what would be the starting size to look at?

Fairly often. May do comps so I need to make sure it will stand up to it