colben22

I went to reinstall my 1500d, but after only glancing at what side the power and ground are on I mixed them up. Ive heard the 1500d has internal fuses, but after seeing the protect light I took it out and didnt see any fuses on the inside. Am I out of luck and blew my amp? I tried switching the wires to the correct sides, but I dont get a light period that way.

I understand bro and I do google shit. Its hard when the more I search different forums the more wrong information people have posted the last 4 years on that amp. I figured it would running off 4 channels at 4 ohms, but I wasnt sure how the added crossovers from the SPR-60c would mix into the equation.

Im planning on getting the sundown SAX 100.4d and running them to some alpine SPR-60c in front and SPR-60 in rear. Will this work out? I dont know too much but will this amp work with these speakers?

ppuurrrppllleeeeeeee

I haven't been able to personally see a FI dust cap, but is there a way to change the color to something not offered by FI? Is it possible to just take some paint and paint over the white version with the color I want?

The q is re0rated at 1500watt rms, with the cooling option it says it can add an additional "200-500" depending on install and scenario. I had orginally planned using a saz1500 to power it at 1 ohm. Will I still be able to do this if the sub is running 1500watt, plus the additional wattage from the cooling option?

Shit, I dont know a lot about all the specifics of this. Will I still be able to run a sundown SAZ-1500v with a new 15? Will i just have to wire it differently or should I just look into a different sub.

The site now says 1500watt rms, is this a miss type? Its only for the 10-15

Which brings up a nother confusing subject on my part. The Fi site now says the 15 is 1500watt rms. So if the sub is dual 1 ohm, amp can be ran at 1ohm for the 1500 watt? But is the 15 actually 1500watt now or did they misstype?

So does it really matter on the cuft as long as its between the recommended? Will one have a better sound then another?

I am pretty new to car audio, but am looking to get a Q 15 and run it with a sundown 1500. Fi suggests 2-2.6 cuft. My main point is understanding how I should tune and set it for 28hz, but have also seen threads saying it should be over 35. Does this depend on the cuft in the box? I think at this point I am reading too much into all this and confusing myself.