slidestarr

Correct, M class LV's do.

If space is a bit of concern you can run a single 15" setup that has alot of motor force. I suggest a SSA XCON or Fi BL fully loaded in a 6 cube box, having personally owned a Fi BL i was at first skeptical of a single 15 coming from 2 12's but what the BL had in motor force made up for the fact it had less cone area.

It would be fine but I would personally try to squeeze 8 cubes net on 2 15's to really slam the lows.

Its really simple actually, I ran way more power than you and managed to get rid of my dimming. First get one of these http://www.remybattery.com/deka-intimidator/9a34m-ct-agm-battery.aspx then get yourself some 1/0 welding wire and run the wire from your stock front battery to the agm to the back. I suggest welding wire cause most of the time its cheaper but the only drawback is its less flexible. Next from your back battery to your amp you can run 4 gauge because the run will be very short. Invest in a volt meter and just monitor your voltage especially when hammering it on idle. Its a bit of an investment but if you are serious about this hobby it is well worth it.

Get a Digital Designs M3b I got mine wired at half ohm and it loves it, DD amps are engineered to make its rated power on low voltage good when your really hammering it and your electrical isn't as stout.

Congrats! What'd you order (if you don't mind me asking)?Fi BTL n2 15"

#947 ordered Jan 14th arrived Mar 14th.

I loved all my fi subs and will continue be a fi audio nut hugger but if they were able to build subs in 7 days and have better communication I bet you will see more fi-a-holics.

Go for a single 15" BTL n2 and grab yourself a 2k amp, I have one in a 6cube box with a 8" aeroport and its a hard hitting sub.

Fi BTL n2 cause its light weight, putting a heavy sub in your 350z will bog it down alot.

you got a long wait ahead of you, I ordered in jan 17, #947 still haven't received it.

I had one on 2k clamped and it took it like a champ

You guys are lucky, I ordered mine on 1/17 #947 and still awaiting on fullfillment

Where in Canada you located?

Awesome upgrade

I sold the M3a and BL but I did run it at .5 daily and abused it everyday. The BL got violent on full tilt and the M3a barely got warm, the surprising thing was how the BL played the lows with brutal force and would pressurize the cabin even with my seat up.

My fully loaded BL 15" came in today so started to design my box. I want to use an 8" aeroport and wasn't sure if it has enough port area. Box is 5.5 ft.3, 8"x17.5" flared aero tuned to 33hz and going to be powered by a DD M3a at .5ohm. Will the 8" aero suffice or will it choke the sub?

I recently sold my amp, m3a, looking for a new amp under $1000 and wanting brand new. The amps I am considering are a M3b and SAZ3500D V.2 but not sure why I would pick one over the other. From comparing the older models it seems the saz3500d v.1 produced more watts than the M3A so is the M3b comparable to the SAZ3500v.2? This amp will be powering a BTL N2 and will be wired down for .5 ohm on a 12volt system. Need some advise

No just looking for a loud daily Then flip a coin or pick whichever one looks better to you, you will not hear a difference. I wouldn't recommend .5 ohm daily though. Why wouldn't you recommend .5 ohm daily? My old setup M3A with Fi BL was .5 ohm daily and most voltage drop I saw was .4volts

No just looking for a loud daily

I have order number #947 and wanted to change my order to a fully loaded BTL n2 15". I have already sent an email but no response and would like to get this change made. Thanks

Went from a SP4 to a BTL N2, shawn emailed me already so its all good.

You should try to get a hold of this guy with the LS 4 sp4 15's 20cubes, 26hz tune

Wow really miss my Dcon's now, awesome video!

I would say no to the subwoofers, but wouldn't mind seeing korean amps and german components with a SSA logo on it.