Austin863

yes i use a t-square and one of thoes clamp's which nem has let me borrow. but i still can never get them right maybe what swift said about the tape being a little slack ill try measuring from the 1 in dash instead of the end. But all of these points you all have made are basically what i do haha. wasn't sure if there were something along thoes lines i was doing wrong or something from blade to the edge of the plate on my saw is 1.25 in. thats what i place my straight edge at. draw a line with the square and then place the straight edge basically right on top of that line on the left edge and then i cut. they are pretty straight from what i see but sometimes when i get the box together it does always fit the way id expect. the bottom is always flush but never the top haha. but i guess practice makes perfect. And i guess lowes is the walmart of hardware so getting cuts done there wouldnt be ideal. but thanks for the help guys. One more quick question. How much better would a table saw work for cuts like what i'm making? Basically what im doing is designing and building boxes for friends or people who ask as something to do for side money. ported and sealed... but yes im just trying to get more input and get better at building box's

yeah no doubt the only problems i ever have is the top plat never fits flush haha. so i usually have to sand the hell out of the corners that aren't even. How are thoes evil prototypes treating you they are so BA.

This enclosure is definitely possible. With 2 inches wide slot port 12 in long and 14.5 high. it would be tuned at about 30 hz and it would fall right into 5.00 cubic feet net volume (after displacement)

Swift.... I. am. jealous.

Yeah yeah haha still wanna hear it! It is more than likely too loud for young ones. :P/>

Yesssss I want to hear it!!!!!

Just wait ^ Nem is a master at making things work (; you'll see what it looks like it doesnt look bad after he is done.

Looks pretty. What was the mistake the face too small? Or what happened?

okay guys this is my friend rgs build log. he has a 96 jeep cherokee laredo. With 2 18'' RE SX (old series) when scott still built them. and an audiopipe 3000d 2 xs power batteries 3400's. and Bass inferno 6.5 coaxils. Some pics of some ideas are coming if you guys have any ideas about how we can fit a 16^3 ft box in the back of his jeep without taking all the back seats out im drawing up some sketches now of what im thinking i need to know how it would work. ill post pics soon.

Ah yes i forgot to add that the sub will be mounted on top. This box is 7.26 cubes. little on the small side but we wanted it to fit in the heep without the seats down and without the loss of visibility in the rear window. 7.26 cubes around 100^2 in of port. tuned to 32 hz. Hoping it gets nasty loud for being ran at 2ohm on the audiopipe. Im not quite sure what the amp is rated at when wired at 2 ohms... i guess we will have to find out.

Box, Bl, and my dog pudge.

Bare with me these pictures were taking with my android.

So now. Its been a long time since an update was brought upon here. so i might as well do it since rg never gets on his forum account to update it. haha. But. He just recieved 2 fi bl 18's. He sold 1 because 2 was to much and he should have got 15's but hey. So now we have 1 fi bl 18 and a box in the making here is a few pics of the new box.

Wts 2 gcon 15s one with a new recone the other is brand new. I'm asking 180 a piece idk how much with shipping. 400 in the box its in now. Ap1500.1d 1 ohm stable 120. Also have a single 5^3 15 box ported tuned to 30hz. The 2 15" box is tuned to 31hz 11.82^3 ft.

Y so nem?

Can you lock this down or whatever i decided not to sell.

Cannot wait to get these incriminators and crescendo's in and operational in my van. ugh. so hard to wait!!!

Hey guys i have a buddy who is looking for a dcon 12" single 4ohm woofer. He is simply buying one this way because he wants to cut down on build time. If at anyone has one itd be greatly appreciated if you could contact me. Payment can be via paypal or money order or however you please. uh let me know on here. thanks guys!

They are both sold? ):