Drmmr4life

Pic of specs (or really close to, but hows the design, first ever, opinons, ideas, positive feeback.... will it work?? lol thanks guys!!

two projects with the skar and other subs. this is my first design and kinda has no purpose. constructive is good so thanks m5. i didnt know what exactly to may for these. I am jumping to different subs, but i may do 1 more skar for sake of in the mean time. and picked the volume because on skars site its rec 3 cubes each max. so i thought more port area per foot was good. . . and chose the length to lower tuning

anyone?

are you going to run passive or active front stage.. futurely?

basically thinking 2 xcon 18s, and some amp, or 2 DC level 4 18's and a dc 3.5 or 5k....def getting an xs d6500 under the hood, and planning on at least 1 but maybe 2 d3100 in the rear. knukoncepts 1/0 for big 3 and runs to the rear. also getting a 250a singer alt.

So i ended up giving away my system to my sister in hopes to build a new one (: my goal is 145dbs give or take. i have a 1999 jeep grand cherokee. i have plans to do the big 3, a 250a HO singer alt compared to stock 136a d6500 under the hood, and two d3100s in the rear. i thought about getting a dc 3.5k and dc lvl 3 or 4 15s or 18s, also thought about a crescendo 2k or 3.5k. but idk. if anyone has any suggestions, ideas, input. pleaseee let me know. looking to run between 2k and under 4k. old sub was a 15 skar vvx, it played low and it was nice, but id rather get a sub that plays higher than that, and tune low if i wanted to. . . budget is 750 for the amp, and 700-800 for the subs. and id pref like as much cone area as i can (:

lol i know what different kinds of boxes are and what they do and specs and freq and all that stuff lol im new to this forum, not audio (just sayin lol) i just didnt understand what you meant by alignment, i havnet heard that before, unless thats what you explained above, in which case i feel stupid lol and i also didnt know what the otherguy meant by saying i need to brace my car properly, meaning eletrical? alt, batts, big 3? or something else. . . . on another note, i will prob do a subs up port back, and at the bottom, idk if i wanna use aero ports, but box prb tned to 34-36hz, 18-20 port area (give or take)

no money till sept haha otherwise id take that haha

I wouldn't bother with a c-pillar wall, mine as well just use a big ass box in the cargo area, and you'll still be able to use your rear-view mirror. Perception of loudness is a funny thing. IE: One could build a spl box for an 8" playing a high frequency, have it meter high, but in another setup metering lower with a lower frequency, and the latter sounds and or feels much louder. As much as I despise the smd forum, I believe there are a few people on there with grand cherokees. You could try PMing them, and pick their brains on their enclosure alignments, and what they managed on termlabs. what do you mean by enclosure alignments? havnent heard that before, and what do you mean by brace properly?? and yes, as i said before, planning on getting a singer 250a alt and some batts

to be honest i havnt read any of this except the first post. check out this guys build. 2 12s just clean!!!!! andits functional for the tire if you still want that. http://www.caraudio.com/forums/general-discussion/251074-ideas-new-install-2004-jeep-grand-cherokee-overland-edition-2.html

Well my goal is 145. With my single skar 15, and600ish clean watts. i hit 137.5. my friend was able to hit 143. i want a daily setup, but his was very close to where i wanna be as far as driving around bumping music. (of coatse numbers are nice to be able to show) but im just using it as an example of loudness. and yes yes with the how the install goes. proper box and everything will be extremely taken into consideration. thought about running a cpillar wall but im not sure yet

thanks man!! been checkin them out!

use the mono, subs are subs, you want ssf and the freq is setup for low end, for subs you can hear 5% harmonic deistortion, mids and highs its 1% (i think) use the 2 channels for some nice midbass if you really want

maybe seeing some SSA 15s or 18's in the future (:

I'll soon be picking up a second Skar VVX which leaves me to a new box build (: It'll be going in the rear cargo area of a 99 Jeep Grand Cherokee I'd did it tuned somewhere around 33-34Hz and about 5 cubes after displacement Subs up and port back Will be using 3/4 mdf and the top will be a double baffle (2 3/4 pieces) and the subs will be countersunk will be building an amp rack off the back (so facing the front of the car) but that really isnt part of the box design Max dim are 40 wide 25 deep and 20 tall, (pref 15 tall though) Everything I will be running is 2 Skar VVX 15's D4 wired to 1 ohm Concept HPN-1500 (clamped clean at 1100) Big 3 upgrade (to be done when i build the new box) I do have a volt meter to check up on things as said earlier, will be in a 99 Jeep Grand Cherokee any help would be very much appreciated or suggestions on different specs (volume, tuning and such) also would like some ideas on terminals

i guess when you put it like that yeah. just most comanies now a days are money money money and because they are so big in businiess you never see them help people, good to know i guess

Actually, um, wow, nevermind. what? go ahead im in nowa defnding anyone lol. idk i figured owneres just dont give input, am i wrong?

to owner of most companies isnt respon for making box designs for people. . . and i want it to be 5 cubes, the subs are going to be over powered and each one is reccommend to 3 so 6 is to big. . . i have more than enough space for some like 12 cubes

why sell it and get somethin else?

id prefer 5 after displacement, that would be awesome, and i guess tuning up to you, but 36ish hz

i like both boxes but i want a box down near cubes. my box is three and because of the power its a hair to big, and in the future ill be running more like 2 k to them

it never hurts to put fuses in, as long as they are they right size, your just protecting things even more with each fuse

yes that for to, and do i just put the port on the botton centered? like a box per say? and i knew about the lows but didnt knew i could tune higher and stil get low cuz of it. thanks man! any chance you could through up a pic of the box (: other wise hopefully ill have it started this week

Any thoughts or input even?

im downloading a version right now, but it appears to just be about speakers (subs) not how to design the enclosures for them, ( again appears so i could very well be wrong)