spare69

I got a Power Acoustik 4000 watt MONO amp for sale. I got this from a friend and have no use for it. Im selling it for $110 shipped. Lemme know if you want it!!! PM ME! RMS Power Rating: 4 Ohms: 1200 Watts x 1 Channel 2 Ohms: 1700 Watts x 1 Channel 1 Ohms: 2200 Watts x 1 Channel [*]Max power output: 4000 watts x 1 channel [*]Input Sensitivity: 200mV-6V [*]THD %: 0.20% [*]Full regulated PWM MOSFET power supply [*]Three way protection circuitry [*]Front Panel Connections & Controls [*]Direct Input 4 ga. Power & 8 ga. Speaker Terminals [*]Top Panel Status Indicators [*]Jet Black Texture Coat Finish [*]Adjustable Tuned Bass EQ (0-18 dB Bass Boost) [*]Hi-Speed digital circuitry [*]Full selectable crossover (HI,Full,Low) [*]1-Ohm Stable Class D Monoblock [*]Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier [*]Heavy duty aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation [*]Platinum-plated RCA level inputs [*]Platinum-plated screw terminals [*]Variable low-pass crossover filter: 40-200 Hz, 24 dB/octave [*]Variable subsonic crossover filter: 20-50 Hz [*]Variable subwoofer bass boost EQ @ 45 Hz [*]Phase Control: 180 degree [*]Remote Gain Control Included [*]Frequency response: 20-200 Hz [*]Signal to Noise Ratio: 100 dB [*]Fusing: (3) 40 [*]Dimensions: 13.77" x 8.26" x 2.16"

I was hoping to go to a competition this weekend In North Carolina, but sadly i must work..... Im thinking i will hit around 146-147 DB's with this current setup

2 FI BL 12's Fully Loaded

Haha thanks guys. Yea it was my first time with a router soooooo.. Yea its alot of sanding to do this too MDF. Also the screw were put there intentionally if your wondering (i like the way it makes it look) Heres a few more pics of whats going on:

that box looks sweet! more pics needed! what kind of wood is that, i'm using birch for mine.the q's should make a good bit of difference i would think. it might not be as dramatic as BL's but the increased power handling with the cooling option should be a big diffrence over the ssd's. i have the old ssd's that are rated at 800w and i have a crossfire vr4000. the ssd's are not going to be able to handle all the power i want to put out, i know i can tune the crossfire to put out roughly 3k-3500 and those q's should take it easily. i have 270a alt, two batcap 2000's, sealed grp 31 batt up front. Yea Thanks bro! I built it myself. Its a single layer of 3/4 MDF. Normally a single layer of MDF would not be able to handle this much power without flex, but my box actually is inside my false floor of my jeep for extra space and to make it tighter. The box has about 6 hours of sanding to about 220 Grit. Then i Stained and varnished it. I did however double baffle the front for the submerged FI symbol. Then i placced random screws in that so that it would have an old timey furniture look to it. All together i was very pleased with it. Also I realllllllly want FI q's just because they can go sealed. Im personally a very big fan of sealed enclosures granted they are not as loud.

Ivve got 2 BL's in a custom normal vented box. They are at a perfect 2.49 CuFt a piece, so my box is around 4.98 cu ft exactly. Sounds amazing and clear. very loud i just need a bigger battery atm running a crescendo bc2000. and 240 amp alt as you can see here http://www.soundsolutionsaudio.com/forum/topic/59449-fi-audio-build-in-progress/

very well done, i like how neat everything is. Though i will ask about your box. If its sealed typically you need 1cu ft of air space behind the subwoofer, but if its ported you usually need a minimum of 1.5 for it to sound good. How are you adjusting for that?

well i just emailed them again and told them to give me a phone number or something so i can communicate with them a bit easier. I dont want to make a big deal out of it, but if they dont get things rolling soon, I AM A call their mamma's on them

Ive been in contact with FI and they barely respond to me. I shipped my sub to them 2 months ago and i have confirmation that it was received and signed for by them from UPS. They said they never received it and were questioning me if i sent it. the address is correct btw. They lost my package and have not contacted me back about it after emailing them.... IF....i get my subwoofer back fixed, i wont be doing business with them again....ssa only for now on. Thought id share this with everyone incase this has happened before, or maybe an FI employee might see this and email me.....

yea i did, well i told them what was the guy said. It was a phone call from ups not an email. but i gave them the tracking info so they can verify with ups about it...

Yea it did a guy named Mike. This is what the guy from UPS said "He said it was delivered on February 26th in the office, and it was signed off by Mike." guys the problem isnt with howw long it takes, its the fact that it arrived to them for over a month ago and they signed for it and now cant find it..... Oh and they said they would be back with me shortly about it and they havent....

I sent my FI BL12 fully loaded out to be reconed over a month and a half ago and it hasnt been sent back to me yet. Ive been in contact with FI and they said they thought it was shipped out already....Where is my subwoofer? Can someone from FI please confirm my order and make sure my subwoofer is done and will be shipped out soon! Order number 1089

Order number 1089 and ordered it Feb 07

My amplifier randomly went into protect last night after i started the car, everything is hoked up right. This morning i unplugged the sub and it was still in protect, so i know it isnt the subwoofer. Then i unplugged the RCAS and it was still in protect. Then i redid the remote wire and restarted my HeadUnit and was still in protect......The Amplifier is a Hifonics BRZ 1700.1, They dont come fused and i did not have a fuse on it. Im also running it at 0.5 ohm. Im thinking its blown but im not sure. BTW it can handle 0.5 ohm no problem.....

You are correct sir!

I ordered a recone and found that i didnt have the money for shipping to the facility, I need to cancel my order for my recone kit and get a refund. I have full intentions to recone the subwoofer, just not right now.

dayummmm, i like that! Think i should sell my working BRZ 1700 and get one of these? (the Hifonics)

They actually dont have a phone number to call, but i got in touch with Shawn about it

If anybody sees a Hifonics BRZ 1700.1 for sale, used or a good price let me know!

Here are some better pics of the board. i was quoted $120 to fix....thinking itd be better to just buy a new one for $200....

well im going to get a quote from DB-r and see what they say. Hopefully good news of something easy and affordable.... I appreciate everyones help!

i said this on page one i copied out the brz manual sorry 2 see it didn't work yea i know i apoligize for not quoting you budd

Ill post a few better quality pictures tomorrow of the amp. Maybe you guys will see something i dont

shizz, you think its repairable for a decent price? (meaning cheaper than a new amp?) if yes, do you know anyone?

ok just tried to discharge it....saw a spark.....hooked it up.....didnt do anything. Protect is still on