TribeamConnek

I wanted to know if anyone else has had this problem yet. Im working on a new build in a blazer everything is going well so far. Im just trying to get the last part of my electrical straight before I build the enclosure. I have a singer 350a alt and I decided to add a mechman vcm. Everything has been hooked up properly but Im not getting any power to the vcm. I checked over wires and made sure I was getting voltage and everything checks out fine. I happened to notice that the plug which hooks up to the alt has one red wire. The plug happens to have 4 prongs. I wanted to know if that could be the reason for things not working as they should.

I am currently working on a build in a 2000 chevy blazer. Everything has been going well up until now. I purchased a singer alt and decided to go ahead and purchase a mechman vcm. Everything has been hooked up to see if the alt was charging and its working fine. When I hooked up the vcm Im not getting any power to the unit. I went back to check the wires and to see if I was getting voltage from the ignition feed and everything is fine. I did notice however that the plug going to the alt only has one wire when its a four pronged plug. I wanted to know if that was the reason for things not working properly.

I wanna see some vids! Love the enclosure. I have a couple of 21's myself and I love them.

I am an owner of IA. Haven't been posting any updates, but I will say that I love my gear. Plan to do an upgrade but I have yet to get around to it. They still do damage for the power that they are on and I hear people tell me all the time that I am the loudest they have heard. Some of these people go to carshows and witness a lot of cars, but still tell me that my setup is louder.

Thanks for you help! I was hoping to have more input on this, but I guess I will have to keep looking. How easy would it be to find a plastic pole plug for it. I know it should be a decent amount of parts floating around for this woofer.

I wanted to know where I could find two of the DP21 motor and basket assemblies and what would be the price of them be? Working on a project and I know you guys can help me out.

They really are!

Thanks, they surprise me everytime I listen to them. I can only imagine what more power will do to them.

Some more vids!

It was always doubled up, but I wanted to add a third layer on the front. Really its only the beauty board that was left to be added on the front, but that can be added anytime. She is solid. In fact I did a vid while I was building it showing how sturdy the baffle was. I put a remote on the baffle and it didn't move.

There is only one at the moment. I am trying to see if I can get a bracket made for another. Its hard finding things for a dodge. I may switch to a 14v setup in the future. whats your voltage now? It sits at 14.5 or 14.6 I want to upgrade to an external regulator and run at 15.8v.

There is only one at the moment. I am trying to see if I can get a bracket made for another. Its hard finding things for a dodge. I may switch to a 14v setup in the future.

Here are some updates with a better camera.