rowdyful7

and maybe a sub better built towards spl

I have tons of speaker wire so I can run the wire from the input on the amp and then the speakers to the output?

I got hit my a drink driver a while back head on and that box is pretty strong to hold up through that

I'm trying to do an internship at my dad's chemical plant this summer before I go off to college for instrumentation

Well I have a 350.4 amp I know this might sound dumb but if I plug the factory wires in the crossover do I run the wires to the amp then back to the crossover?

Well I have factory spots for the tweeter and 6.5 so couldn't I just make a spacer with some mdf for the 6.5 and put the tweeter in the factory spot

So can anyone tell me the pros/cons of getting a comp set or going with co axials?

I seen a guy on YouTube that did 4 8s under the seat I think it was the same model truck you'll just have to search it but that's a route also

Maybe a zcon 15

Good luck I'm ready to see it up and bumping

Kicker 350.4 I picked up for $80 today and 2 50 feet spools of sky high 0 gauge

I got my zcons coming in there 18s and I have a few ideas for it I got about 20 cubes to work with here's some pictures could anyone tell me if I'm close or way off?

Well how is the cheaper crescendo comp set or is the more expensive one that much more worth it

Well I ordered a bulk pack of damplifier pro so I should have enough for the doors after the roof and back of the cab

I want it to sound nice but I'm spending 80 on the amp and I would like to spend no more then 150 on the speakers so co axial I found some mb quarts that looked nice but I haven't heard them in person so I'm not sure what to go with I have two 18 zcons and need something that can get descently loud

yeah i don't have much experience but i do have a a 7 band equalizer in my room collecting dust if you think it would be a good idea to run that or would the equalizer on my head unit be fine?

And has anyone else had a problem with xs batteries shipping my box seemed beat up and one of my connector bags had a hole I'm it and they were just out In the box it wasent a major deal because the batteries seem fine I was just wondering

Well since this is a build log I guess I'll list my stuff and post pictures of what i have already 2 zcon 18s Sundown 5000d Singer 6 phase alternator Kinetic 2400&7500 100ft of sky high 0 gauge And bulk pack of damplifier pro

Ok potentially it will fit with the batteries and amp behind the box on the bump but the subs would be pressed into to the back seat

But that way the port will almost be pressed on my roof let me try some diffrent ways

The only thing I can think of is making the false floor and putting the battery and amp under it put I need to go and check how high the box would be sitting

Well it would fit by my measurments but then I don't know where I would put my amp or xs 7500

And what's the dimensions on it?

That is exactly what I had in mind for mine swift what's your price?

I was gonna go port forward subs up so it needs to be atleast 40 inches long right?