josephk

My bad, I meant BL, yes. Awesome! Thanks for the help guys.

Would I get them in Dual 2 ohm configuration and wire them like so? Sorry to make a repetitive thread, I just want to make sure I'm doing it right lol.

Ok, at the moment I'm running a single ported 10" BTL in an underseat box I made. I'm wanting to go to two SSD 12"s in a larger sealed box. The amp I have is a JBL GTO 1201.1 II: specs: http://www.jbl.com/EN-US/Products/Pages/ProductSupportDetails.aspx?PID=GTO1201.1+II 787W RMS x 1 channel at 4 ohms • 1114W RMS x 1 channel at 2 ohms • Dynamic power: 1339W at 2 ohms What voice coil option would I need to choose on them, and how would I wire them to get ~700W going to each sub? Thanks!

I'm using a JBL GTO 1201.1 II to power my 15" Q... got it for $300 shipped and it's working great for me.

Well, here's the deal. I've been running my 15" Q in a sealed box for the last month or so and I am wanting to build a ported box for it sometime soon and need help getting a design together. I have no problem building stuff, I'm just no good at getting something together that will be right for my application (right ft^3, right port size, cut sizes, etc.). Below is a pic. of the largest outside dimensions I can possibly go with. The 4" rise is to clear the tranny hump (it's going in an ext. cab silverado.) I'm wanting something tuned to ~33 hz or so. If anyone can get together a design for me, that would be great. Just send me a PM or reply on here and we can go into further detail. You can work on it at your own pace - I'm not in a hurry. I just have no clue when it comes to designing ported boxes and was looking for a little help from those that are wiser than me . Thanks, Joseph.

http://www.itwconsumer.com/catalog.aspx?prodID=29 Anyone know if this is urethane based? I picked up some at O Rielly's after school, but I can't find anywhere whether it is urethane based or not? Just want to make sure... thanks. Joseph.

It's not too bad, I just didn't know whether I could fix it well enough or not... really more of a tear than a hole. That streak on there is super glue (not my doing).

Hey, Sean. Just incase you havn't seen, I found the problem in the way I had it wired... something was wrong about the terminals on the box, so I'm just going to run the wires straight through... As for the hole, yes, that's the problem. Any way I can fix it myself? Thanks

Anyone at Fi, I need to send back my 15" Q for repair. My brother wanted to help me when I was attaching it to the box and he slipped with the drill, poking a hole in the rubberish material between the paper cone and the gasket. I was wondering what repair costs would be for that? I no longer have the box it was shipped to me in, so what I will have to do is have Fi send me a box for it. If it is an option, I would also just like to have the box already pre-payed to ship to y'all and then y'all send it back to me, and I can pay the total for repair and the shipping both ways, whatever it would be. I am pretty sure I am going to have this sent back and have that replaced, but is there any way that I might fix it myself that is aesthetically pleasing? Thanks for the help, Joseph.

Hey, Scott. You've got another PM . I'd rather not type it again or I'd post it here... sorry, I'm lazy. Joseph.

I can't really think of anything else to test to try and figure out what the problem is. I have tested everything I've been told to test, and I can't find out what's wrong. Is there anything else I can test? Something on the sub- all other connections have power to them amp works, speaker terminals have power, speaker wire to sub is delivering power- sub just isn't working? What should the DC resistance on the sub terminals be reading? I could test those as well... If there is nothing more I can do, then I would need to send it back to FI to see what is wrong and I need to know what the system is for doing that? I no longer have the box it came to me in, as it was torn up a little. Thanks a lot for the help, Joseph.

I'll find the link to the original topic I made... I would have continued in it, but I didn't know y'all don't answer PM's. I made another post in it... Thanks for the help. Joseph. Here's the link: http://www.soundsolutionsaudio.com/forum/i...mp;#entry281715 Thanks again.

Sorry for having to make a post, but Scott I've sent you several PM's over the last 2 weeks and e-mailed you a couple times and still have not gotten a reply... I don't know if you're just missing them or what, but I need some questions answered. Joseph.

Where can I get a gain setting CD? Would wal-mart happen to have them? My friend has indeed lost the one he had...

Sub disconnected? I've got power to them. Sean, do I need to go pick up a digital multimeter? I have a non-digital, but it's not east to get an accurate reading by looking at a gauge. Thanks. Joseph.