Polish

A quick demo video showing a bit of flex with whatever Decaf song was playing at the moment.

It reminds me of Chewbacca.

The American Bass 15 is still kicking hard, this sub is awesome. I'd love to upgrade to an 18 of some sort eventually just to move a little more air but they are all so expensive unless you settle for a basic Parts Express model which wouldn't hold a candle to the 15. I'd like to upgrade everything again really but being a baller on a budget, it's no so easy. If you were in my shoes, what would you upgrade? Here are my current system specs. I might look into some OFC wiring but not sure how much it would help given my current lowish power setup. Head Unit – Pioneer DEH-X7500SFront Door Speakers –6.5″ MB Quart Components FSB216Rear Door Speakers – 6.5” Phoenix Gold Coaxial (HU Power)Amplifiers – Rockford Fosgate R125-2 on the MBQ’s / MB Quart ONX1.1600D on the SubSubwoofer - American Bass XFL 15″ Dual 2 Ohm in 4.4 cu/ft tuned to 33hzBattery/Wiring – Xs Power S680 / 2 AWG DB Link CCA / Scosche Distribution BlockSound Deadening – 40ish sq/ft FatMat in the hatch. I would have liked some higher end second skin type deadening but the budget was not there.

Yea man I wish I could try an 18 or add another 15. My 15 is still doing great. _ I got a new battery under the hood finally. The S680 XS Power. I am pretty impressed so far for such a small battery. Gonna add a D series or something in the back soon. Then MORE POWER!!

American Bass 15 is still banging hard. I am going to make a new fiberglass box soon and port it. My oem battery is done though, the amp finally beat it into submission. So I ordered what I could fit in the OEM spot for now. An XS Power S680 AGM Battery, should do the trick for now.

Got the 15" in my old box and it's pretty serious for a single sub. I didn't hammer on it too hard just yet but it seems to have those 4 10's easily matched. We'll see once I crank on it a bit more. It's in my old ported box, 4.4 cubes @ 33 hertz. I had to mount it to the front of the box though, since the brace was in the way to mount it up top. So I stuck some MDF over the 4 10" holes and screwed it down. I cut a quick hole and tossed it in. I'll see how it does in this box and decide if I want to go bigger or smaller when I eventually make a box just for this sub. I think the size will be about the same though, might adjust tuning a bit depending how testing this box plays out. It's nothing special to look at right now so I didn't take a pic yet. Got the 15" in my old box and it's pretty serious for a single sub. I didn't hammer on it too hard just yet but it seems to have those 4 10's easily matched. We'll see once I crank on it a bit more. It's in my old ported box, 4.4 cubes @ 33 hertz. I had to mount it to the front of the box though, since the brace was in the way to mount it up top. So I stuck some MDF over the 4 10" holes and screwed it down. I cut a quick hole and tossed it in. I'll see how it does in this box and decide if I want to go bigger or smaller when I eventually make a box just for this sub. I think the size will be about the same though, might adjust tuning a bit depending how testing this box plays out. It's nothing special to look at right now so I didn't take a pic yet.

Update time. I decided to cut up the 4th order, it just took up too much space. In doing so the 4 10's got damaged, they were inverted and the surround gasket foam stuck to the mdf. So it peeled away part of each even trying to be careful. So I stopped at a local car audio place today and picked up a new sub, it's the American Bass XFL 15" D2. This thing is a beast, I am going to make a new baffle for my old 4.4 cu/ft ported box (33hz) and use that for now. Here are some pics of the sub.

This is what the new white led dome looks like during the day, it's very bright. Stuck the new RF R125-2 amp in real quick. This is behind the passenger seat. The box takes up so much room currently I don't have a spot to mount the amps together. The MB Quart components sound so much better with a proper amp, night and day difference. I just need to get a better battery now. Then some bondo and vinyl so I can make some proper door pods and dash pod. Then I plan to change the sub box and subs to get the amp down to 1 ohm.

Got my new amp in today, made a quick video. Check it out. Should have it in this weekend.

I did it in my 4th order box so I can smell the coils if they start to get hot.

I finally got a 2 channel amp on order to power the highs. As usual I am ballin on a budget, so I got the RF R125-2. It's cheap but will get the job done. I will update once I get it put in. It should wake up the components a lot compared to deck power.

Add it all up and subtract it from the internal volume. So if you have two subs that displace .10 each, that is .20. Then the port displaces .90 which you add to the .20 so the total is 1.10. Then you would subtract 1.10 from the box volume. If it was 6.10, you would be left with 5 cu/ft. Make sure you only calculate the internal port volume, not the entire thing.

8 cu/ft box (after port/woofer displacement) tuned at 28-30hz should move some air.

New Dash Setup. Well for a short time until I can get an AudioControl Epic160, then I am going to fiberglass it so it is angled at the driver a bit. Pioneer DEHX7500s Digital Volt Meter Equus Analog Volt Meter 8-18v with LED bulb to match radio - not so blinding in person Autometer Water Temp Gauge (sender not hooked up at time of pic) with a white led bulb

Got some new goods on the way finally, seems like forever since I changed anything. I got some white led bulbs to replace the crappy blue ones I have now in the dome and hatch light. I also got 2 voltmeters, one digital readout and one analog readout type. I am not sure which I'll hook to where yet but I wanted digital since it's easier to read at a glance but analog because it should respond faster for quick drops, so I got both. I also got a new headunit so I can connect my phone easier for music access. I use a crappy fm modulator right now with the old Alpine and it sucks. I went with the Pioneer DEHx7500S, it also has quite a few more options over my current 10 year old Alpine. So that should be a nice change. I'll have pics up once it all comes in and I get stuff installed. Next up after this round of stuff is an amp for my highs which I need badly and a new battery, which also really need.