MedicalUse

I'm on knukonceptz 0 awg, with the 22ft of power i already have that i will use for alt to batt, then for rest of wiring, think it will be safe to buy extra 20ft of both power and ground for rest of the wiring?

Should i get the clear power/ground awg so i can permanent marker it so i know what i cut is + or - lolol?

Is XS power 0 gauge good? found a 50 foot spool of power/ground for 140$ on sonic electronics, would that be enough for all my wiring or is there better wiring you would suggest?

So if i run 2 runs from 2400 of 0awg to both + on amp do i have both runs have a fuse? so 2 kicker 300ANL fuses on both, since i already have 1 more of these fuses

Stock battery I AM A toss, its a pile, stock battery will be my kinetik 3800 and secondary kinetik 2400

Two batteries, both in the trunk And micheal singer responded to me, he said he can make me a 275a alt with lifetime warrenty for $489

Two batteries, both in the trunk

For doing 2 batts, you run the positive on first bat to positive on 2nd batt, negative from first batt to neg on 2nd batt, and use the alt + to 2nd batt +, and have both batts -gounded to the car? Then use 2 positive 0 awg on 2nd battery to both positive on amp then ground both amps to cassis in both different locations sanded down? is that right?

Well right now i have 22Ft of kicker 0 awg positive on my stock battery in trunk to amp lol, yes 22 ft for only 3 feet to amp all that wire to use yet, so i could use that termial on that alt to go to back trunk battery postive and use the extra to use to amp positive? and take off the stock battery ground and use 0 awg for batt ground? and my saturn has a body kit so im going to have to lift it up to use engine block to gound on car lol

And oh yeah my stock battery is in the trunk? How the hell would i do a big 3 like that lol :S. I cant put a battery up front this saturn is too souped up under the hood for that, rolling at 340 horsepower. Very confused i am

Yeah I sent a inqury of my car and stuff to singer, waiting for a responce, I'm glad you told me about tenney, nice price, thank you. So you think tenney 220A HO would do well powering to kinetik aand 2 mayhems and 2 AQ lol? If so thanks for the help!!!!

Dude tenney alt has a 220amp alt for $370 with powdercoat and aluminum overdrive pully, and the one on dc engineering for my car is a 270 amp alt for 680$! what one would you go with?

I have room for a second mayhem yes, but I wouldn't know how to make a box for two, I know it would be a L slot port it would be a walled one side to side like | | but I wouldn't know the cutout for one, do you? /> Wouldn't be a L port I mean if you cant design a box then i doubt this install is going to go well. take a step back before you damage some expensive gear. I already have a thumping system I just want to upgrade to be louder lol, when I get my taxes I'm getting a 270 HO dc Alt. I have one aq 2200, kinetik 3800 and a kinetik 2400, so if I add another 12" mayhem I would just need another design for a box for 2 12"s tunes to 32hz, and have one aq on each. So then the bass will be louder? And also have a xstacic bat cap 400. My dad has one it's nice!

So adding a second sub will make the bass louder and then just hook up 2 amps two each sub?

I have room for a second mayhem yes, but I wouldn't know how to make a box for two, I know it would be a L slot port it would be a walled one side to side like | | but I wouldn't know the cutout for one, do you? :)/> Wouldn't be a L port I mean