Dexter Chaos

Looking really good. someone has skillz!!!!

that low of tuning will be awesome.

agreed. Op get some duct seal from a hardware store and play around with different locations and aiming. I will get them moved/pointed in another direction then.

This is something I will work on and post what I find as well. Currently it seems that most of my sound comes out of the tweeter and less through the midbass driver. but I will hopefully confirm this by trying each driver independently as advised from above.

my head unit only has 3 band parametric eq. Bass, mid, and treble 3 options per setting Q, wdth, and level the passive crossover that came with the kit has settings on it as well

not sure what you mean by Lpad? there are different settings on the passive crossover that came with Component set. it is ear piercing at higher volumes. I have been making adjustments mostly just turing gain down on amp and it seems to be helping.

I will get some pictures today and post them. the 6.5speaker is in the front part of door and the tweeter is mounted in the dash firing towards the windshield. but like i said i will get pictures and post them.

i ran a channel to to crossover that came with the component set then that goes to the midbass driver and tweeter.

it doesn't hurt to gound to the front as well as in the back. It is a personel preferance. I did. make sure you remove paint or debri where your connection is at. This will help to ensure proper contact with less resistance. this is if you haven't already.

Your enclosure looks great!!!!!!!!!!!! I built my first box last year. I built something similar. I will suggest adding more support vertically due to the fact these boards are larger and more space between connections. I did not do this either and the top of my box vibrates. Which intern makes it less efficient. Just thought I would share. Might help for future builds. ONCE AGAIN NICE JOB ON YOUR BOX!!!!!!!!!!!!!!!!!!!!!!!

Since you said the amp was 2 ohm does that mean it only works at two ohms? this is new to me.

So that I can shrink it if nesasary. Anyone help me with my port?

So I am designing a new enclosure and this one will have a center port. I have concerns with my port width when it reaches the rear of the enclosure. This is for 2-Zcon 12's,SAZ3500 power,currently box will be at a net volume roughly 7.8 cubes tuned at 32 the distance from the port wall to the flare is 4.33 inches if you cant read the photo Since it is in the center do I need to maintain the same width(in my case 6.5inches)? Is there a rule of thumb for this? Here is a pic of what I currently have designed.

works for me

Met chop in november, just got hooked up with IAK then. Looking forward to this

I have been messing around with WINISD for the past day or so. Trying to model my 12" Zcons and follow what these graphs are telling me. 1. When I enter the parameters using the autofill for some of them my graph peaks at around 100hz even though my box tuning is much lower. Why is this?Can someone help this NEWB to understand what I have done in error. 2. Also if I enter the paramters of the web site it gives me error messages saying they are incorrect. If I let it autofill some of them then it will graph. Any explanantion why this is? Thanks in advance.

Thanks for the help getting it set up. I just not sure what I am looking at or looking for to help with my set up.

Correct these are the ones i have been using but i wanted to confirm the units they are suppose to be in. I believe i have some of the units incorrect.

Since some of them do not have units listed with them what are they? VAS = ??? SD = ??? BL = ??? mms = ??? I clicked on the unit and not 100% i got them set back correctly?

i have a set of AQ 6.5 comp i bought used and never hooked up if your interested let me know.

can you tell me the differances with the areo port vs your previous box, 1. tuning 2. port area 3. any other impressions 4. why the change

nice stuff there. love my 12 zcons cant imagine the 18's. looking forward to your install

Definately interested in what you find. I found that 6 cubes seemed to be best for the my 2 12's. I forgot what you ended up finding out? I am building new enclosure come spring hopefully.

Those dimensions are close to what I built with my square port 80in port area. Tune to 32 originally. Wasn't musical enough for me wouldn't play more dubstep style music which is most of my listening. But also struggled on the lows(28hz and down but I believe they needed more space after some tips from this forum. I am interested to hear your results from the round port. I was thinking along the same path but was told to go to a 8in port to be able to play more range. Thoughts????