-
Content Count
100 -
Joined
-
Last visited
Posts posted by tankht56
-
-
Hello guys i have recently pulled all the factory crap out of my truck and ordered some things but i have a few problems. I bought a set of Cadence CVLT-35B tweeters along with a pair of Selenium St-200s i also purchased two pair of Alpine SPS-500(i know i could have gotten components just didnt want to) . The amp i have is a Hifonics HFi100.4 and the headunit is a Pioneer AVH-P5200BT. At the time of purchase i didnt know the seleniums needed a bass blocker of some sort so i searched and came across using an active crossover. My question is would i be able to use what i have listed with the addition of a crossover or should i buy a separate amp for the tweeters? The crossover i had in mind is the Kicker 03KX3. the vehicle is a 2door dodge ram. any input would be appreciated and if you think i should buy something else tell me.
0 -
How come you don't want to try and install it yourself?
its not for me its for my bro park avenue and things are placed wierd hard to get to
0 -
wasup bros i was lookin for sumbody in the college station area that would be interested in me hookin them up with some cash to help me with my build......just dont wont a shop that dont even know what the big 3 is to mess with my system lol
0 -
like the title reads which one of these would you rather have four of....
0 -
scrapped the idea man.. im looking to buy an 07 avalanche or a yukon denali
0 -
Looks sick! Who did the design?
iamamp3pimp over at ****
0 -
What do yall think about this?? will be going in my single cab 95 dodge ram
here are the particulars....
bottom 77 x 49
bottom 77 x 49
top 77 x 49
top 77 x 49
baffle 74 x 46
baffle 74 x 46
front 46 x 5
front 46 x 5
side 77 x 16
side 77 x 16
side 77 x 16
side 77 x 16
Port internal sides (4) 3 x 9.5
port external top 44.5 x 3
port external bottom 44.5 x 6
port external sides (2) 3 x 9.5
we are looking at 10 sealed and 17.75 ported
get dowels for bracing...
46x10 for the cutout to cab
10-11 feet of wood dowels for bracing...
i mean the dowels are 12 inches apart
fiberglass resin first then cover in bedliner... also resin the corners and dowels on the inside
so it'd be easiest to build the port outside the car
then slide it in
then screw it in from the sides
3/4 MDF sheets
its 5T x 19W >>>> PLEXIGLASS WINDOW
now make sure the inner lip is .5 bigger so you can flush mount the plexi on the inside.
like in the pics.
0 -
yea its a single cab truck... the truck with the cutout in the pictures are just examples though... i dont have a box designed yet. the design is just an example of how i want the port entering the cab
0 -
hello i am requesting a design for a blowthrough. The hole for the connection to the cab hasn't been cutout yet. i have attached a photo of how my enclosure will be through the cab. i will be running 6 18" Fi SSDs stock. with about 6k watts. subs should be facing up but should also be covered. i want it to be low but loud. it wont be for burps just a loud ass daily driver
here are the dimensions 49 1/2" wheel weld to wheel weld
77" front to back of bed
19" height
this is how i want the port to enter the cab
0 -
95 reg cab ram 5.2l 120+
wind noise was ridiculous
0 -
-
Will a 225amp excessive amperage alternator be enough to run 3 Kinetik 2400s?
my electrical is currently stock but i will be getting a new alt and those 3 batteries pretty soon. everything will be in 1/0awg big 3 will be in 2/0awg
i am about to get a Memphis 4KW and i know its a power hog. i wont power it up until i get the voltage to back it up. and eventually when i save up some more money im gonna be runnin 4 Bl 15s in a blowthrough. any help or advice will be much appreciated.
0 -
wusup man great build with superb craftsmanship... i have seen a lot of guys with the carputer and a regular headunit what is the reason behind this?
0 -
thanks manbeer for your informative reply.
0 -
hey m5 could you suggest me a setup?
0 -
im currently coming from a speaker setup that was pretty stupid (4 6x9s behind the seats) a local installer said it would sound good. but i just want to do it right this time so i wont have to go back and do it again. i dont have any speakers in the doors at the moment.
0 -
what do you recommend?
0 -
ok i have a 1995 dodge ram single cab and i am buying 8 rockford fosgate 5 1/4 4 in each door a set of rockford fosgate 6.5 components. i want to know what amps i should run these with i would prefer a separate amp for the component set. i am looking to buy from ebay,sonicelectronix,or onlinecarstereo.
this is the product code for the speakers i am going to use.
Rockford Fosgate P162S-- component set
Rockford Fosgate Punch P152C-- speakers
0 -
its a guy on another forum that does designs for free and i just asked him to build me a design and this is what he gave me. i am gonna get pete kulicki to design me some blueprints and see what he comes up with. im pretty sure his will be way more complex
0 -
-
what do you mean by that?
0 -
im currently evaluating a couple of designs for my setup and this is one of them i would love to get as much feedback on this as possible. it will be in a 95 single cab dodge ram.
0 -
Fi strikes again!! they do look a little smaller than the other BTLs tho
0 -
sorry i just wanted to see if anyone had any videos with this song already
0
Help with new system (mainly mids and highs)
in General Audio
Posted
thanks now I'll just work on selling this stuff