Jump to content

thehawk93

Members
  • Content Count

    641
  • Joined

  • Last visited

Posts posted by thehawk93


  1. No time to build a smaller enclosure for it, but the sub is still doing extremely well.  It's currently in my sister's Durango living an easy life on about 300wrms @ 4 ohms on her Cadence F100-5.  Output on the lower power is still quite good and the sub is pretty much fully broken in.  It still tears into the lows in amazing fashion and my sister is VERY happy with it.  I'm not sure if the DCON will go back into her truck or not at this point.

     

     Great to hear that it is a great sub on low end power as well as higher end power .


  2.  Thank you Alton for the sub Review, the sub is yours now so if you would like to share pictures of it that is up to you. There is going to be a change as  the front plate and back plate will be a black on the production subs. All I ask is that you go ahead  in the future and build a smaller box and come back with a second review on the sub and tell us how it performs that way as well. Again this sub is going to be rated at 600 RMS  and yes it is built in the U.S.A and the coils as well are built in the U.S.A. percision econo wind coils.


  3. Random.........I have 5-6 months before purchasing equipment for my next build & it seems to change day to day/week to week. Basshead problems sad.png

     

     What kind of power are you thiking and you can always have team price on my subs !! Cause you know team IAK FTW !!!


  4.  Hello Team,

     

     So as of right now, I have a prototype 12 inch sub with Mike Sims, Before everthing had happen he was going to do testing on it and give it a review. Now we are working on getting it over to Shannon Alton so he can do testing and review. If all goes wells I should have my first line of subs out then after some time I should have another line out also.


  5. all made it safely....

    ready to see how sat. show goes, friday's was interesting.....

    not sure how the strict demo rules will effect our overall experiance.

    huge crew here so we will have fun regardless

    chop

    Good Luck Team IAK hope you all have fun... WISH I WAS THERE..... :drink40:


  6. Wow, I have gone though about half the cd and this CD gets down...... So far there has been one song that took my sub blow 30 hz. it was a 26 hz clip and did a 126.5 sealed on the dash with car off....LOL.... So sealed on the dash my highest score is a 136.5 @ 35 hz.. this is with one 12 inch sub running 750 rms or so I would say I have lots of work to do to get louder.. :morepower1::suicide-santa:


  7. might be selling the xcons....

    if any current interesr exist, let me know....

    i will most likely form a sale ad next week.

    chop

    How much for the xcons or the PAP wmd2's brother Chop??? Hook a IAK brother up bro....lol.,.. :popcorn:


  8. Hey Shane.. i got some news.. good news and bad news... so here it is-

    The news first-

    Even though you purchased a used meter, i still checked it over to make sure it's in like-new condition.

    One thing i did notice is the suction cups didnt want to adhere to the windshield for more than 23 sec..

    I don't know about you but 23sec isn't fast enough to setup burp, find your peak, tune your box, adjust your port and be a world record holder, lol.

    So, i went ahead and cut out all the sealant in the cups and reapplied silicone to it.

    Now, i did this at different times.

    The 2nd one i did several hrs later after i noticed it was at fault too so it was still in the drying process when it was packaged up.

    When you get your meter, look at the suction cup that is NEXT to the plug in port on the meter!

    Make sure that thre isn't any silicone on the actual suction cup itself..

    All the sealant is injected in the center of the cup and let just barely come up out of the gap in the center to seal it for when the suction cups are FLAT.

    So a lip of silicone is perfectly fine but any silicone that may be reaching all the way to the outer edge of the cup itself would need to be removed.

    Silicone is very easy to remove.. just use your finger if u have to remove any, hehe.

    So, that takes care of returning the used meter back to new.

    Now the bad news... :(

    You probably won't get your meter Saturday...

    The reason is because of the good news....

    Your meter is already shipped so it should be there Friday and YOU will be the first person with the slowed\custom bass-lined music cd.

    Yay!! hehe.

    Lol, funny stuff there bro you had me going there for a min. I thought you were going to tell me that the meter wasn't working or that you dropped the handheld and broke it... lol... :woot::lol2:

×