-
Content Count
53 -
Joined
-
Last visited
Posts posted by airycsillest916
-
-
clean build man
0 -
he has lay-a-wayill see what i can get out of it.
and yeah i wanted to but didnt have the money at the time.
wasn't you thinking about going with the ethos?I thought I read that somewherei figured id hear that lol. well i was planning on doing a complete rebuild on my car; trunk wall, new amp, new speakers, upgraded electrical so if anything this will motivate me to get on it.
imma have to look into that. they seem like bad ass subs. wish i would have been less impatient and just waited to get one. live and learn though.
0 -
ill see what i can get out of it.
wasn't you thinking about going with the ethos?I thought I read that somewherei figured id hear that lol. well i was planning on doing a complete rebuild on my car; trunk wall, new amp, new speakers, upgraded electrical so if anything this will motivate me to get on it.
and yeah i wanted to but didnt have the money at the time.
0 -
i dont think i could get too much for the motor.
0 -
i figured id hear that lol. well i was planning on doing a complete rebuild on my car; trunk wall, new amp, new speakers, upgraded electrical so if anything this will motivate me to get on it.
0 -
Def going to do that once i get my system up and running again. I hope that there is some kind of warranty on my woofer.
speakers are stupid, it tried to do what you told it to but you told it kill itself. buy a recone, set the amp up correctly, and learn to use your ears and nose to tell when the sub is being pushed too hard.
yeah guess its time to recone. its going to be my first time doing it but it doesnt seem too hard. would upgrading to level 4 soft parts or maybe a psi recone be helpful with stiffer suspension?
0 -
Def going to do that once i get my system up and running again. I hope that there is some kind of warranty on my woofer.
0 -
yeah ive heard some people say you can go 8-10hz below and some said dont go below 2hz tuning. maybe i just made a mistake.
0 -
sounds pretty ba
0 -
yeah ported tuned at 32hz.
0 -
perhaps SSF set too low? 'unloaded' the sub and bottomed it out? Just guessing...
That could be it. SSF was at 25hz i think.
0 -
DD-1 is your problem
how so?
0 -
So after having my sub for 3 weeks the suspension is gone on it . It is a DC Audio Level 3, i had it in a 3.4ft^3 box tuned to 32HZ running less than rated clean power to it (used a DD1). It never over heated to the point I could smell the coil but today it started bottoming out and i took it out of the box and could bottom it out with one finger. Did i do something wrong or was this a manufacturer error?
0 -
Ill try to get some measurements tonight or tomorrow if its too dark. i was planning on doing a trunk wall and sealing it all off. I always have my seats down when im beating if not my rear deck lid goes insane.
0 -
Damn man, you should post more videos.
Agree.
0 -
You will get the most of your sub when you fire it and the port towards the rear in most CAR applications...this way you don't get "port noise" from the air, let's the sound waves reverb off of the rear of the car then the dash/windshield before it hits your ears and it gives the listener more of a physical experience, IMO. There are videos on you tube about how to get the most, measured, spl out of your setup when positioning your enclosure. You would gain spl by facing the sub and port to the stern I know that for sure(in a car).
That seems to be the common consensus when it comes to trunk builds. My buddy had his set up firing into the cabin with the trunk completely sealed off and i just loved the amount of air it generated so that was what i was going for but seems like the build might be a pain in the ass if it doesnt work out right.
0 -
Until the last couple of weekends, I've only seen PSI built subs mainly in SPL competition.
Well, except for the couple of times that I got my brains mashed in by Dangrebel's 4 18s setup ...
And like I said, positive results every time. Say what you want about the company or the owner(s), but they build some very nice drivers for the SPL competition world.
The other day I built an enclosure for a PSI built IA Flatline ported and tuned to 36 htz powered by a Linear Power 2202 amplifier for a friend of mine. This guy likes to be loud on music with no care for a meter reading.
Large enclosure for a Mini Van on about 550 watts of Class A/B power.
I must say that after listening to all kinds of music from the Eagles / Sheffield Labs to Skrillix / Slowed and Screwed (his music, Not mine), My thoughts on a "musical" PSI built IA 15" Flatline driver ... Not bad at all guys !!!
Really impressive !!! He's in the process of buying a better headunit with EQ and Time Alignment so as soon as I can get a few pics and vids up, I will because when I first saw this driver, I automatically thought about this thread.
We are hoping to get this vehicle out to a few events this year and get some demos going. So if you are anywhere near the Ms / Tn / La area ... Please swing by a few events and check out this ride !!!
Thanks SSA
Randal
That seems bad ass man. I got a chance to hear 2 15" BL's with PSI soft parts and they sounded awesome. If/When my sub needs a recone im most likely going to go with PSI.
0 -
I'm thinking about building a new box for my 15" DC level 3. My current box is slot ported to the back with the sub firing up towards the trunk lid, 3.3^ft tuned to 32 hz. I was thinking about building a box firing into the cab (BMW 330CI). Im not too experienced with building boxes but think i can manage this. Has anyone here done this kind of box before and can give me any pointers?
0 -
Seems like im kinda late to the party but my advice would be since youve already invested a good amount of money into the system get a DD1 to set your gains properly and ether build a good box or find someone to build one for you and ditch that prefab box. Another thing is when i first installed a system into my current car i used the stock HU and a RCA converter. After about 2 months or so i decided to get a Pioneer HU so i could run a USB drive. It made my sub WAY more clear and loud. Just a little food for thought.
0 -
Most defiantly gunna be taking a good look at getting an ethos once i get my electrical ready and an upgraded amp. Shit looks beast and I haven't heard anything bad about them.
0 -
HDS300
in SoundQubed
Man i had a 18" AQ HDC3 a few years back. Banged hard on mid and high bass but died off on the lows. My buddy just picked up 3 12" HDS300 and put them in his Ram inverted port up (dont know the exact dimentions of the box but i think it was tuned around 33hz) moves crazy air and sounds great for fairly cheap subs.
0 -
My friend has pwx 6's on a fosgate 400.4. Sounds awesome but i agree with litium figure out whats wrong first.
0 -
What RCA converter are you using?
0 -
Im selling the sub to a buddy. The sub wasnt what i wanted in the first place. Impulse buy because i got it for cheap.
0
Blown After 3 Weeks of Play
in Subwoofers / Speakers
Posted
I just checked the coil and both sides are reading out at exactly 2ohm so the coil seems to be fine. when the sub was warm i could easily bottom it out by hand and even now after i took it out of the box and its been sitting on my counter i can still get it to bottom out. this shit is so frustrating!