JJBESTARECOGNIZE6FO

Want to build a series-tunes 6th order for a Single Fi Car Audio SSD 18. Not sure where to start I know 6th orders are more complex to design and more of a trial and error build but if I never try it out I will never learn. So of course the goal is to successfully build a 6th order but depending on the final results if it does not meet expectations there will be adjustments. Also if none of the revisions succeed I will fall back on a standard Ported Enclosure . Please if you have any useful information on 6th order designing/building It would be awesome if you can share them with me . Thanks in advance max dimension - height 30” - depth 21” - width 38”

Both of those links are for Parallel-Tuned 6th orders.. I’m doing a Series-Tuned

Won’t learn if I don’t try

The only knowledge I have about designing 6th orders is that the first chamber should be for the lower frequencies and the second chamber for the higher .. i just don’t know what frequency to tune the chambers at

Want to build a series-tunes 6th order for a Single Fi Car Audio SSD 18. Not sure where to start I know 6th orders are more complex to design and more of a trial and error build but if I never try it out I will never learn. So of course the goal is to successfully build a 6th order but depending on the final results if it does not meet expectations there will be adjustments. Also if non of the revisions succeed I will fall back on a standard Ported Enclosure . Please if you have any useful information on 6th order designing/building It would be awesome if you can share them with me . Thanks in advancez max dimension - height 30” - depth 21” - width 38”

Currently designing a Subwoofer Enclosure for an L7 15 for a 2001 Lincoln Towncar. I am planning to build the enclosure so it would is on the rear ledge in the trunk .. my question is is it bad for partial surface of the cone to only be 4 inches away from a wall of the enclosure? The enclosure will still maintain volume required

I’m just building the enclosure to customers request. I recommend building the enclosure as you said, but the constomer does not want a a bulky box and also wants the space underneath for things like camping chairs etc..

So it should be fine? Would not cause any noise from the bass hitting so close to the wall?

Would this cause the sub to suffocate because the wall is too close? And would this also cause distortion?

Hey ... I'm new to the forum and this is my First Post .... So I've been building and designing my own enclosure for a while now about over five years ... And the software I use is Torres ... But I want a more accurate and professional software ... So what programs do u guys recommend me using ... Also any equations that will be useful on pen and paper ... Thanks

is this a 6th order enclosure?

Sorry accidentally submitted this post twice

Hello I'm new to this forum and this is my first post ... So I've been designing and building my enclosures now for a while about 5 years now and use a software called Torres ... But now I want to use a new program that is more accurate and professional ... So is there and software programs that I should use?.. And any equations I can use on pen and paper? .. Thanks