Jump to content

Florida_Audio

Members
  • Content Count

    365
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Florida_Audio

  1. Florida_Audio

    Welcome to the IHoP v.2

  2. Florida_Audio

    Welcome to the IHoP v.2

    i really think if bernie was there instead of hilary, trump would 100% lose. but now. its really just who is worse? its pretty close. they are both horrible, but for different reasons
  3. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    wow thanks for that explanation!
  4. Florida_Audio

    Welcome to the IHoP v.2

    not sure how true this is, but the article says this (so its basically difficult to tell if its actually able to hold that amount of storage) (just saying watch out) : Мany of today's counterfeit microSD cards have much less actual storage than advertised. For example, a card may have as little as 8GB of actual storage space, but the label on it may read 64GB. The worse part is that your device may also “see” it as a 64GB card – firmware hacks are a common practice and allow this to happen. In fact, your device can and will try to write data to the gigs that don't exist. This will either overwrite existing data or result in an error. In either case, your data may get corrupted irreversibly. On top of all this, fake microSD cards are guaranteed to be slow at reading and writing data. They can be so painfully sluggish that they may have a serious impact on a phone's performance, causing it to lag or even crash. If your device is having these symptoms, you might want to check if the microSD card in it is genuine. We'll show you how to do that in a bit.
  5. Florida_Audio

    Welcome to the IHoP v.2

    this is the same 1? and is one dollar cheaper lol maybe cause shipped from china its so cheap? i wonder what shipping cost is. still prob not much to ship http://www.ebay.com/itm/256GB-256-gb-micro-sd-card-class-H1/182200775825?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D35389%26meid%3D1e831960bcc045e1b53149cf5f20f6e1%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D252458200966 well it might be fake... probably is. 0 reviews on that item there and well read this article http://www.phonearena.com/news/Beware-of-fake-microSD-cards-Heres-how-to-tell-a-counterfeit-from-the-original_id77769
  6. Florida_Audio

    Welcome to the IHoP v.2

    The Black Prince - Robby Robinson turned 70 years old just days after this guest spot performance. Amazing shape and inspirational figure all-round! Well yea hes not a natural bodybuilder, but still thats pretty impressive at 70 years old!
  7. Florida_Audio

    Welcome to the IHoP v.2

    dayum $2,295,000 all i see is over 2 million whole lee fk nice gotta be relaxing and quiet
  8. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    wow thanks for great explaination but just to clarify one last thing, well i hope lol so CLD tiles, can they be placed on the inside trim, as in the plastic part of door? to add some weight so as to reduce the rattle? or i should just add CCF and no CLD tiles? cause like i said, when i added a bit of pressure with just one finger, pushing against the plastic door inside, the rattling stopped.
  9. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    ok thanks. not exactly sure what mass loaded vinyl does? but ive heard of it also... so many things that are so confusing to me lol nor do i understand why MLV would make it so i dont need to cover the whole area. but ill just take your word and apply the CCF only in the area that requires it. thanks! unless you want to explain any of this lol but also.... if only the right door has audible rattles, if i apply CCF to the right door, should i also apply it to the left door in the exact same amount? to even it out?
  10. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    ok thanks. so ill look for 1/4 inch then i guess? would i really need to apply this foam to the whole door panel? or just around the vibrating area should be fine? i feel as though i may do a shitty job.... i think velcro stripes might be easiest for me.... so incase i mess up but also, the door isnt exactly flat.... it curves all over it. so id have to do several tiny pieces all over? and attach the foam to the plastic part of the inside trim panel right? cause thats whats vibrating only near the speaker
  11. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    yea these mats also seem to be meant for some sports use, not meant for inside cars lol? https://www.amazon.com/Seattle-Sports-Bulk-Foam-Adhesive/dp/B00MC9DNGA/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1470280839&sr=1-1&keywords=closed+cell+foam but i think its still CCF?
  12. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    ugh i misread sound deadener showdown website they are saying to put cld tiles on the outer panel, the outside of door. im saying that the inside of the plastic panel is vibrating, and they dont say anything about cld tiles for this
  13. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    also, so im still a bit lost by what you meant, that "And the set is generic anyways. Meaning ie the crossover components weren't chosen for your speakers but any of the ones they could ship in that set. " so you mean all speakers and crossovers in sets can always be swapped and are never specifically made for them? yea ive been to that site before. ive read alot about their CLD tiles and how you only need a small % covered with those tiles to help reduce vibrations. what other simple cures can work for the plastic? but i dont think they mentioned if you can install those tiles on the actual door panel plastic part? whats a buzzing point? lol... sorry for so many questions. i feel as though alot of the terms i dont understand exactly what it meant by them
  14. Florida_Audio

    Welcome to the IHoP v.2

    but its a dude lol and of course this guy. eddie hall! i guess it was actually 3 weeks ago
  15. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    ok thanks. what type of closed cell foam? how much just to stop the rattle? would a small amount around the speaker be okay? does the foam have a sticky side to be applied somewhere? if so, do i stick the foam onto the plastic part of the door panel? or the metal part in which the speaker is mounted? do you ever put deadening onto the plastic part of the door panel? its so weird, once again, that only one side has this issue lol.... the fk. everything seems so unsymmetrical, when i would like for things to be more uniform.... and then maybe i can do my own alterations to change and tune to my likings, like time adjustment or balance, and fade, etc... thanks again!
  16. Florida_Audio

    Welcome to the IHoP v.2

    you ever seen any videos of matt kroc? he set some world record in powerlifitng back in the day, and somewhat recently decided he wanted to be a girl... to each their own. do what you want to do. but holy shit was this surprising
  17. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    wow they actually have unique speakers of each set , and the crossovers can be made specifically for that unique speaker within a set? if i understand what you were saying? like they have a common model number for speakers that are mass produced, but the crossover is always different and only works for the specific speaker, even though many sets of the same speaker exist? Also.... i now have another issue thats become quite annoying... not sure if its a loose door panel clip or what.... but the door panel does seem to be fit in snugly and not moving.... but when i play anything with some bass in it, the right door panel vibrates in a way that it rattles. the left door panel does not have this issue. all the clips do seem to be snug. i have noticed this issue with the right door panel before, but it wasnt ever really this bad... or i just didnt notice it as much. maybe because recently i am trying to focus much more into the details of each side. and well the right door doesnt have a tweeter right now, because i shipped it off. the thing is.... the rattle in the door panel is coming directly in front of the midbass woofer.... its not anywhere near the edges of the door panel... when i put just one finger lightly pressed against the holes where the speaker has room to pass sound through the door panel, the vibrations stop completely and it sounds great. i just need to put a bit of a light pressure against the door panel and it sounds fine... what can i do to stop this rattle? i know it may be several different things and difficult to say what the issue is. but where should i start? what should i check? any ideas? thanks. i feel as though this may be difficult because i cant really see inside the door pane to see if the speaker may be playing too close to the door panel or whatever the issue is, i cannot actually see inside the panel while its rattling...
  18. Florida_Audio

    Welcome to the IHoP v.2

    Wow some nice numbers there. You heard about matt croc a few months ago lol, a bit crazy and extremely surprising when i found out he wanted to be a girl. Powerlifting is cool but can be dangerous short and long term. Eddie halls recent record lift he almost had some heart issue or something bad during the lift. This was like within past 2 weeks or so. And yea let me know if you do check either channel out and how you like them, or not lol. I like alot of fitness based youtube channels. But those 2 have a bigger focus on powerlifting. Hodgetwins are awesome though! Their comedy channel is amazing lol And theres marc lobliner with good info and kali muscle is entertaining. Ramen noodles with kali lol
  19. Florida_Audio

    Welcome to the IHoP v.2

    wow yea powerlifting can be quite taxing on your body. you ever watch alan thralls channel on youtube? he seems to be very knowledgeable and have good videos, i like his channel or conditotraininghq https://www.youtube.com/user/athrall7 https://www.youtube.com/channel/UCWZmmDqEJv277d7hBa1nRfg
  20. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    i bought the spr 60c set 2 woofers, 2 tweeters, 2 passive crossovers, and some other various items for these i called them and said just the tweeter is having issues. and i asked to just send in the tweeter. it would be stupid for myself and the company, if they required me to disassemble everything and send it all in, if its just the tweeter that has issues...
  21. Florida_Audio

    Welcome to the IHoP v.2

    350 grams of protein a day? sounds like alot? unless you are 6 ft or taller and have alot of muscle mass? normally at most you want to eat 1 gram of protein per pound of body weight. a better number is really around 0.6 grams of protein per pound of body weight. idk, i feel like theres more to this than i know though :] sry i didnt read much about the situation previously sweet cravings, sugar free gum can work. lasts a decent amount of time, and if mint, can make breath smell good
  22. Florida_Audio

    Welcome to the IHoP v.2

    http://i.imgur.com/Iqefz83.mp4 darn, cant upload it as a video embed? __________________________________________________________ when you install new subwoofer and speakers, and the bass drops! lol this ones quite funny.... no1 can really sit in the back now lol this last pics pretty bad. quite inaccurate. but meh, i guess it may relate to people that dont want to change any settings at their headunit lol. just plug and play.... but i didnt make the image...
  23. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    ok guys! just went to post office and dropped tweeter off. i put it in a regular envelope, and tore off some very thin bubble wrap around the tweeter. meh. i hope it will be fine when shipping it back. cost me like $2.50 for shipping. should arrive to sonic on friday. and then sonic said it takes them up to 3 days to test it and see if its actually defective... thing is, it plays music okay, and at times pretty good. but.... in comparison to the other tweeter, it plays much lower volume and it does distort only at certain parts. i hope they are competent enough to do some test with equipment and i hope that would show the issue immediately. and if not, then i may need to call them and explain everything ive tried and my reasoning why i sent it back. i hope they dont even bother testing it and just send me a new tweeter. and this makes me question if the tweeter they send me will be new? like why would they open a new set of spr 60c speakers just to take out 1 tweeter. if anything they might just send me a used tweeter..... i really hope its new....
  24. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    for testing polarity we were talking about mid bass woofer. well at least i was talking about it i dont know if you can even see a tweeter cone push out or in? and i wouldnt even consider putting a 9 volt to a tweeter lol. id assume that would definitely destroy the tweeter?
  25. Florida_Audio

    Left tweeter seems to be dying, sounds weak

    never tried what? alot of things have been said about tweeters here loll
×