sqjeep

if both ports are built excatly the same the only thing i can think of is its the tinsel leads on the sub slapping.

wow i did not know that.

What you have there is a birth sheet. A birth sheet shows what an amplifier can truly put out at the lowest impedance. So instead of being 750watts it is truly 930watts. I would use 900watts to set up the amp with a dmm.

Post a pic of the paper so i can help you out. As for setting the gains with a dmm use the 750 is fine u will not be clipping the amp at all, especially if it can produce 930 watts rms.

I was wondering if this cable would be good to use for making custom rcas ? here are the links... PartsExpress 2 PartsExpress 1 If you know anything better can use list the site? Attn mods Im thinking this should be moved into the general section for better traffic...

Sorry 7 left and 7 right

14 of them.

Thanks Adrian_D that was good reading. Now I need to find some good cheap rca ends.

some of the cables have a drain wire, do i connect with the ground wire on both ends?? Or do i do it on the headunit side and take the other side and ground it to the chassis??

How good is that Tiff stuff?? Any noise from your cables?? Also how is it per foot??

Heres the pic that Zed sent out in the email posted above

Got my email too and here it is The amp looks like an ESX amp (fin and color) with the top chopped flat and the top has the plexi glass We apologize for the delay and are now pleased to announce that production of the new Zed amplifiers shall begin mid August. Owing to the high demand for these amplifiers, we shall now accept pre-payment for your order as of the 25th July, 2009. In order for us to process your order, we do require your address so that the correct freight can be calculated. The process shall work on a “first come first served” basis. Group buys are welcome and the applicable discounts are shown below. Payment may be made with a cheque, money order or Payal (Use ZEDAUDIO@AOL.COM as the recipient) KRONOS 250w/ch is $429 LEVIATHAN 150w x 6 is $599 California residents must add in the applicable sales tax OF 8.25%. Final pictures shall only be available once production begins. These and other information shall be posted on our website. Please feel free to contact me with any questions which you may have. Here is a rough picture of Leviathan, the 6 channel. The picture does not show the plexi-glass top. Yours truly, Stephen Mantz (for Zed Audio Corporation) Retail Program 1) Purchase 1 amplifiers allows 0% off the MSRP 2) Purchase 2 amplifiers allows 2% off the MSRP 3) Purchase 3 amplifiers allows 3% off the MSRP 4) Purchase 4 amplifiers allows 4% off the MSRP 5) Purchase 5 amplifiers allows 5% off the MSRP 6) Purchase 6 amplifiers allows 7.5% off the MSRP 7) Purchase >10 amplifiers allows 10% off the MSRP

bump

take a pic of the area you like to put the box and take measurements of the area (length, height, depth)

Just a shot in the dark, why make your own rca's? For a custom fit and it supposed to be cheaper and better than buying rcas Bigjon are use saying i could jus use speaker wire?? Cool. I might look into that myself, thanks! Your welcome. Anybody else have done this and can give some insite??

for one amp or two amps im going with one amp sorry i edit it with links to the site

for one amp 1 amp for two amps 2 Amps Then jus buy the number of rcas you need

Just a shot in the dark, why make your own rca's? For a custom fit and it supposed to be cheaper and better than buying rcas Bigjon are use saying i could jus use speaker wire??

I was wondering if this wire would be ok to use to make custom rcas?? Here is the links... Dayton MLI Dayton MSC P.S I know i made two topics about this but i placed it in the wrong section so if a mod could combine the two that would be great (Its in the techincal section) Sorry and thanks

That doesn't mean take it slow, it means the suspension will loosten up and they will be louder after about 2 weeks. ^^^X2^^^ Did u have another sub in the same box, or was the bass cube made for this sub??

X2 the amp aint the problem. If you set your gains correctly and you know how to use the volume knob you will never have any problem.

Less excusion near port freq., more excursion a bit above (around 36-40hz )or below tuning.(20hz) My bad thanks for the correction Krill007 and Lucky 76 you are welcome

Another great deal Im thinking you will be getting many offers from this one soon. Good Luck

Think about it this way ... a subwoofer creates two areas of air mass, One from the front and another from the rear. With that being said a sealed captures the rear air mass and uses that the push the woofer as well as the singal showing more excursion. In a ported the air excapes allowing not a lot of movement. But in a ported u wont see the full excursion unless u are right near the port feq.

i wouldn't use anything smaller than 16AWG speaker wire. 2 feet of 16 Awg can handle about 1300 watts