Jump to content

MIKE W

Members
  • Content Count

    27
  • Joined

  • Last visited

Everything posted by MIKE W

  1. i have the Rockford Fosgate Power T20001bd amp and a red top optimus battery under the hood with a 800 kintik in the trunk all wired with 0ga wire and gold terminals with a 200 amp alt and was thinking of getting a Rockford Fosgate RFC2DHybrid 2.0 Farad Digital Stiffening Capacitor if this isnt a nough juice and a alt if i need one? this is for my btl 18 fully loaded wich rms is 2000 watts any help and i apreate it thanks guys!!
  2. ok so i cant read a tape for nothing so i got the guy across the street to read it for me on my box iv'e asked this questions a few times but never had the right messurement's but now i do here they are the depth is 22'5/8 the lenght is 41'1/8 the width is 22'13/16 i have two L shape ports the messurement are length 4'3/4 depth is 18'1/4 and the bottom of the L sape port which gose toward the center of the box is 10'1/2 remember i have two L shape ports one on each side of the box with the same messurement's now at the bottom of the L shape port where it goes toward the center of the box i have 5'1/2 from the L SHAPE PORT to the back of the speaker box these are all messurment's from outside to outside and i have 3/4 wood if anyone could help me find the cubic foot and the hurtz of this box i will thank u so much for i hade this speaker just sitting here a few days now and iam scared to put it in the box for i might mess it up or it not sound good the speaker requers to be at 30 to 35 hurtz but 32 recommended for best sound i did not add the speaker displacement on here but any help i would kindly apreate it !!!!!!!!!! thanks guys !
  3. cool thanks man u saved me some money!!
  4. MIKE W

    better explaintory on box 18

    thanks man sorry it took a min to get back to u i drew out a 3D demension on the box with the messurements top view and side view i no for sure then u would no what the cubic feet and hurtz would be but it wont let me send it here if u have a email i cqan send it to u there??
  5. ok i built a box the length is 31 inch's with is 21 inch's hight is 17 inch's now i have 1 port comming off each side of of the outer 31 inch walls they are 3by21by22 one port on each side of the outer walls of the 31 inch's iam trying to find what cubic feet i have and what is my box tuned at on hurtz ?? any help would be verry helpfull i dident no i could get so stressed on a speaker box!18 fi btl iswhat i have
  6. MIKE W

    better explaintory on box 18

    ok man the lenght from out to out is 41 inch's, the depth of box from out to outside is 22and a 1/4 the width of the box from out to out is 22 and 3/4 now the port width is 3 inch's the highth is 21 and a 1/4 inch's and the depth is 18 where it 90s toward the back of the box it goes in toward the center at 10 inch's keep in mind i have two L shape ports both the same mesurements just one on each side of the box thanks i hope u can figure this out cuz iam lost!!
  7. MIKE W

    better explaintory on box 18

    ok iam going to mussure it now give me like 5 or ten min and ill have the messurement's for u thanks man be right back!!
  8. MIKE W

    better explaintory on box 18

    ok just the L shape mdf board is 3/4 thick the width is roughly 21 inch's depth is 18 inch's .. now where it 90s it is 10 inch's long
  9. MIKE W

    how to tune a box 32 hrz?

    i should be getting a 18 btl any day now so i built a box for it i have somewhere around 6 to 7 cubic feet not including the ports iam wondering how to get the box tuned at 32 to 35 hertz is it the cubic feet for which the box is made or is it from the amp and cd deck ?? any help would be usefull thanks yall
  10. MIKE W

    better explaintory on box 18

    i have not a clue how to find volume iam not that good at math to tell u the truth is there any way u could find out round what cubic feet iam working with and the inch's of my port size's and bout somewhere give or take on the hurtz man i would dearly thank u so much whish i already do for helping me !!!??
  11. MIKE W

    better explaintory on box 18

    ok i think were all getting confused let me start over the total lenght of the box is 40 inch's from outside to outside the width is 22 from out to out the highth is 24 from out to out now i have one L shape port on each side of the box @3 inch's lenght 21 inch's width 22 inch's depth at the back of the box where the L shape turns into a 90 it comes in toward the middle 10 inch's on both sides leaving me a gap from the back of the L shape port to the back of the speaker box 4 inch's sorry guy's!!!!!! iam tryin to tell u the best way i can but if this is still making no sence how do i fund sq inch's for the ports and how do i find what they are tuned at?
  12. MIKE W

    better explaintory on box 18

    lol sorry bout that !! ok the with is 21 inch's the lengh is 3 inch's and the depth is 22 inch's i hope that can help sorry bout that yall
  13. MIKE W

    better explaintory on box 18

    no these are the mesurement of the inside box from wall to wall 31 inch's lengh 21 inch's hight 17 with and the port size is 3 inch's in lenght 21 inch's in with 22 inch's in hight i will have 2 ports both the same size can u let me no what the hurtz would be and the cubes on the box thanks man!!
  14. MIKE W

    port for box 18 btl?

    thanks man for ever thang!!
  15. MIKE W

    port for box 18 btl?

    if i have round 8 cubic feet will two ports be ok? two of them at 3 inche's by 21? thanks for any help guys!
  16. MIKE W

    cubic feet for 18btl i need help

    thanks man good lookin!!
  17. iam building a box will 41 INCHES BY 21 INCHES BY 22 " be fine for the sub and how many cubic feet would that be thanks for any help !!
  18. MIKE W

    cubic feet for 18btl i need help

    thats good to hear i was getting a lil scared i built it to big thanks man and the ports i will have two both at 21"by4" will that be ok u think?
  19. MIKE W

    speaker box for 18btl??

    thanks man!!
  20. MIKE W

    speaker box for 18btl??

    i have a crown vic wonderin if this box will work to get full range for the sub and able to get 32hrz 3FTby 2FT3"by1ft7"? any help i would thank if this box will not work what do u recommend i have a few inches give or take all around?
  21. which amps should i use for a 18 blt fuly loaded dual 1ohm's?
  22. i was wonderin if i could use two of the same amps 1000rms to each coils?@0.5ohms
  23. MIKE W

    fi 18 at dual 1ohm which amps to use

    like 700.00
  24. MIKE W

    fi 18 at dual 1ohm which amps to use

    thanks man another question for u can i run two amps one on each coil so i get 0.5 ohms and what would u recommend for that what kind?
  25. MIKE W

    FI 18'SUBS

    IAM LOOKING AT BUYING SOME FI AUDIO SUBS 18'S I WILL BE GETTING BUT IAM HAVING A HARD TIME FIGURING OUT WHAT WOULD BE LOUDER 2 SSD 18 INCHFI SUBS OR 1 BTL FULLY LOADED ANY HELP ON THIS WOULD HELP ME THANKS!!! ill be using kintek batterys in a ported box in a crown victoria what iam looking for is for people to hear me far away as well as shakeing the hell out of my car lol which do u think would be best 2 18ssd or the blt loaded18
×