Search the Community
Showing results for tags 'Btl'.
Found 13 results
-
12" Fi BTL UFO D2 Item(s) for Sale: 12" Fi BTL UFO Dual 2 ohm Item(s) Description/Condition: -pie slug style Fi UFO motor -12" 12 spoke aluminum frame painted hammered gray -PSI recone rated for 3k RMS -triple sewn leads -quad spiders -Longer coil to mimic Fi's HiXmax coil. Good for daily. Uses .25" spacers to accommodate coil length. -HD pulp cone -High roll surround This sub has been nothing but great to me. Can't say enough about it. Sadly I have just sold my amp and made a bunch of space in my trunk for a lot more business. ( (2) 12"s ) This 12" can do it all..handled my MMATS m3000.1 with ease, hit the lows, and was great for a daily woofer. Has always been on a good supporting electrical cast. I am pulling the sub tomorrow because I'll be pulling my amp as well. Can take more pictures for people with more interest then. Recone has a date of 9/xx/14 and actually didn't use it for about 4 weeks it was installed because I had to wait on a warranty claim on a battery. There is a bit of a glue splotch on the top plate, but no biggie, just CA. bottom of motor looks mint. Minimal chips in ferrite. Included is the motor boot and 12" gasket. Price: 275$ plus shipping Shipping and Miscellaneous Item Information: Ask me for a shipping quote Will be using UPS. US 48 only.
-
I know there were two different designs of the ferrite sandwich in the UFO driver. Pie shaped slugs and a single slate of ferrite. I heard the single slate had more motor force. If the pie slice and the single slice were ran with the same parts would there be a problem?
-
*Fi Car Audio* Fi BL 15" Dual 1 ohm coils -Flatwound coil -Cooling -Hyper pole -Integrated leads -daily gap -Universal gap In great shape, only used it in between my builds a couple times. Been sitting in my living room most of its existence. 300 shipped. US 48. Paypal only.
-
I recently reconed my BTL UFO 12" with high xmax option. I used the spacers provided to space the basket .250" above the bump in the motor. I first knocked the dust cap off in a huge box I had made for my zcon. 3.1 cu ft. tuned to 32. Glued it back up and I did it again. I built a new box because I thought big box, over powering, exc. could have been the cause. Plus it didn't sound that great (anticipated) I have a box made.. 2.4 cu ft. tuned to 32. Knocked the dust cap off again today. I am using household goop to glue the dust cap. Should I go with CA? Possibility that the recone was not made to be spaced from the motor?
-
Was thinking of inverting my BTL UFO 12" as the cutout diameter is the same size as the motor. Should I compensate box volume for this action? I may want to revert it normally in the future, but I have a show on the 17th that I will be attending and would like to show this beast motor off. Space is not an issue, as I am downsizing from my previous enclosure for my zcon. Is there an audible motor noise that comes with this? downsides?
- 5 replies
-
- Fi car audio
- Fi
-
(and 3 more)
Tagged with:
-
Finally got my hands back on some straight street jam material. AKA: Qs and a BTL UFO I've seen some UFO BTLs have a spacer in between basket and the motor. Is this just an adapter for basket patterns or is it a beneficial option to the sub? Excited for my new Fi experience and so is the wife =]
-
I think I saw someone say that the gaps are the same in both these drivers. Reason why I'm asking is this guy has a recone for an N2 selling it at a decent price and I have a UFO motor coming my way. You think I'll run into any issues?
-
I have been ripped off, sold short, and stolen from in this hobby plenty of times. I have never ripped anyone off, ripped equipment off of anybody, or lied about any piece of equipment I have sold. Karma came back around again today in my favor, as I received a BNIB Fi BL 15" from an ebay purchase. Cost me 250$ shipped. =] Keep it real when it comes to selling your stuff and it will come back around! It has for me! =]
-
I am getting ready to build a box for a btl n2 18 and I found these cut sheets on the forums Fi links to from their home page. http://www.soundsolutionsaudio.com/forum/topic/44518-btl-box-cut-sheets/ The dimensions just so happen to be perfect to fit in my escape in the area I have left. I have 3 questions. Is this a decent box design? Is there any problem laying the box on its back to fire sub up port up? ( too close to back hatch I think to fire back ) And it shows the hole the sub goes in as 16 3/4 diameter. Is that right for an 18 inch btl? I figured it would be close to 18 inches?
-
Hey may be a dumb question but does the power handling differ from the original specs with the xmax coil and the cooling package added to the sub??? its the n2
-
Hi fellas, just checkin in. Here's what I got.
-
What are some specs on the ufo style btl 18"? As i cant ind them on the fi site. It was built in 2009,fully loaded dual 1 ohm,got it from a guy that never used it,still in the crate..my main question is what is the xmax on this style btl and are these still in production?? Any input is greatly appreciated..thanks!!