Search the Community
Showing results for tags 'Infinite Baffle'.
Found 2 results
This is pretty much a reinstall of my previous build with a few changes. Namely the nexus 7 tablet install. A parts list is probably the best place to start. Speakers dayton nd20 (A pillars, probably)tang band w4 1337 (kick panels)peerless sls 8" (IB doors, might build enclosures if rattles can not be controlled)mach 5 mj18 8ohm (IB ski pass)Amps tweeter amp - kicker 100.2mid amp - us acoustics usx 2080midbass amp - 2x kicker 250.2sub amp - cadence zrs2002processing 2x minidps 2x4 Tablet and related hardware nexus 7 (1st gen)otg cable (usb and charge)4 port usb hubjoycon exr steering wheel interfaceSound deadening everything is from SDS. I'll list materials as I use them and give an approximate list here. 50 tiles~30 sq ft of ccf~18 sq ft of mlv1 roll butyl ropeStuff I might have to buy dacline driverI'll skip the unimportant bits like wiring. I use the cheap stuff anyways. Here is my plan for installing everything. sound deaden trunk/rear deck build baffle (IB) for sub build amp rack run all the wiring sound deaden everything else install midbass test aiming for the mid and tweeters fg A pillars fg kick panels install nexus 7 tune tune tune I think thats pretty much it. Constructive criticism is welcome. warning: All pictures will be taken with a potato. I'll grab a decent camera for final pics.
I was trying to spec out a large enclosure car audio build. I am working in the range of greater than 13ft^3, but less than 14ft^3(depending on speaker displacement and thickness of mounting. I am unable to respec the box dimensions. I was wondering if this box would be capable of working with two IB315's or if this is too little of a volume for proper operation. I am looking at a QTC of between .735 and .75 depending on just how much space I lose to sub, sound proofing, and wood displacement(not sure if this calculation would stay the same with two subs sharing the same volume?). My desire for an IB setup is low power requirement needs, and using the box as built. Thanks for any info.