Search the Community
Showing results for tags 'low'.
Found 12 results
B2 Audio X2C
DedicatedEnthusiast posted a topic in For Sale/WantedB2 Audio X2C 15 $650 shipped! Contact at 440-915-2309 for further questions/concerns.
Sundown X v.2
DedicatedEnthusiast posted a topic in For Sale/WantedDual 2 Ohm Sundown X v.2 built by Dave Leib $250 shipped! Contact at 440-915-2309 for further questions/concerns.
Sundown X v.2 12's built by Dave Leib
DedicatedEnthusiast posted a topic in For Sale/WantedHello everyone, long time no see. I am selling a pair of Dual 2-ohm (technically D1.7) 12" Sundown X v.2's built by Dave Leib a.k.a "Strongman Designs." Reason I am selling them is because I realized upon testing to see if my digital multi-meter was working correctly that one of the coils is reading higher on the one sub indicating that too much heat had been applied to it recently so rather than risking any further damage to it I am going to assume that I have too much power for these. Having said this in all honesty, let me make it perfectly clear here that both subs are still in perfect working order as we speak, even the one that is reading differently. Had I not thrown my multi-meter on it to test it in order to see if it was working properly (the multi-meter itself) I would have never known there was any difference or discrepancy between the two. However, because one of them is reading off now and I do not know what is to be expected out of it's performance long-term I will be letting these go for $500+ shipping (that includes both). Any further questions or concerns please feel free to text me at 440-915-2309 Phil
CRESCENDO BC3500D / XS POWER XP3000 / 2/0 FUSED WELDING WIRE
DedicatedEnthusiast posted a topic in For Sale/WantedCrescendo BC3500D is approximately six months old, has never been exposed to low voltage and has no scratches, dings or dents whatsoever. Does 3,875 watts RMS at 13.8v Xs power XP3000 battery is sitting at over 12.7v after being out of my car for several weeks now and is rated to support 3,000 watts rms power 2/0 welding wire is rated to support over 400 continuous amps of current and has already been heat-shrinked and fused for both positive and negative runs from front to back plus the big three upgrade and an additional trunk ground if you so wish to use it WIRE CAN BE HAD FOR $120 SHIPPED FORGOT TO PUT PRICE AMONG OTHER INFO ON SALES SHEET
B2 Audio subs and custom Cherryman Box For Sale
DedicatedEnthusiast posted a topic in For Sale/WantedI am selling a pair of B2 Audio X2C 15's that were assembled by Jay Holm in Denmark and custom modded for me and my extreme daily driving abuse. I am willing to let them go for $1,000 each shipped or $1,800 for the pair. Reason I am selling them is because they have managed to crack not one but two gas tanks now on my car, I can provide shop receipts for anyone who would like to see proof. Also they have broken the spoiler wing off my trunk a long time ago so are basically destroying my car and I cannot afford to keep fixing it. The link below shows a video of the subs and system playing from B2 Audio's YouTube page. I do not own the video that they edited here but I did submit the original footage to them from my cell phone for the fans and public to see. The box was built by Cherryman Customs in Tennessee and is double layered (1.5" thick) all the way around. It is 10 cu ft net inside with a tuning of 27hz and has a lexan glass bullet proof window that provides view of the subs inside with red L.E.D. lights that illuminate. Measurements are 36" W x 20.5" H x 46" D If interested I am willing to let it go for $500 picked up or you pay shipping. Any additional questions or concerns please feel free to PM and ask me.
Like-New 18" EMF ermagerd Dual 1 (except needs recone)
DedicatedEnthusiast posted a topic in For Sale/WantedAlright guys, here is a single 18" EMF audio ermagerd Dual 1 (can be wired down to 0.5 ohm) that needs to be reconed. The recone will run you $200 so you can have a brand new 6,500 watt RMS sub for just $600 since I am offering this unit shipped anywhere in the U.S. for $400, NO TRADES. This thing was able to handle a b2 audio m1u at 0.5 ohms for literally hours at a time until I got greedy and started clipping it with the gain. It got louder and lower than any other dual sub set-up I have ever had or owned and I have run kicker, SSA and Fi car audio to name a few. It will take the power and handle the abuse as long as the signal and power you are feeding it is clean. Weighs in at just over 100lbs, features a super stupid silly insane HIGH-roll rubber surround and nearly 4" of peak-to-peak excursion with a true carbon-fiber dust cap and quad-stack magnet/motor. Any further questions or concerns please feel free to ask me. Phil
CUSTOM SSA XCON's and BOX (if wanted) FOR SALE
DedicatedEnthusiast posted a topic in For Sale/WantedOkay guys these are two Dual Two Ohm DVC 12'' SSA XCON's with custom carbon fiber caps for added strength less than six months old with literally less than a weeks worth of total play time. Reason i am selling them is because honestly they are far too damn loud for me to be used on the daily lmao. They get VERY loud and VERY low!!! Speakers alone can be had for $800 shipped to your door. Box was custom built to the exact optimal specs for both subs by Dave the Box Guy himself and can be had with speakers for $1,000 or alone on its own for $200 (a mere FRACTION of what i paid) but you must pay for shipping on it and it ain't gonna be cheap. Any additional questions or concerns please feel free to PM me. Also i do have a Crescendo BC3500D for sale on here in another thread currently just FYI:D
BOX BUILD SHOUTOUT
boxbuildshoutout posted a topic in Build LogsHello everyone I would like to start by saying I have no intention of breaking or bending any site or community rules here so pls forgive me if I do that is not my intention. I am here to share my personal experience with cherrymancustoms who has built me an extremely personalized and truly custom enclosure to meet the needs of my particular listening goals. This man has spent literally countless hours over-the-phone speaking with me one on one in an attempt to maximize my enclosure design and has built what I consider to be a very good quality box. I have attached images for your own viewing and judgement below. His website is www.cherrymancustoms.com/ where he has a phone number listed for you to contact him if you so choose to do. He also has a YouTube account and forum thread over at caraudio.com I plan on again encouraging him to create an account here so he can communicate with you guys easily and share all of his work here locally with the community. FYI this box was built with an adjustable internal volume and adjustable tuning plus it is "double walled" everywhere from top to bottom and side to side. It features some serious bracing too. For any of you looking for someone to build and create exactly what you have in mind or rather those of you who need somebody to help you determine what would be best for your needs I strongly encourage you to give this man a chance he is super friendly, knowledgeable and hard-working as you can see. Best of wishes to everyone here hope some of you may find this information to be of good use.
4th order jeep wall
Welterc50 posted a topic in SPL & SQ / FabricationOK, So I recently aquired a 1996 jeep grand cherokee and am in the planning phase of the project. I am looking at running a 3:1 ratio 4th order with either 4 15" or 18" drivers. The issue I am running into is that I am concerned that the box height will end up too low to mount the drivers on a flat baffle. With this being said I was wondering if anyone has toyed around with angled baffles. With this setup I was going to do a driver's side port and tune around 45-50hz. Would this be too much of a hassle and prove to be a nightmare, or should I try to use a more upward firing baffle to fit the 4 drivers (similar to watt's truck but larger and drivers stacked in a 2x2 config instead of 1x4). By my figures I should have roughly 27 cubes to play with as far as interior box volume. If anyone has any ideas im all ears (i like getting loud but like lows also). Planned power is in the 15-18k range, and since my last build ran 12k and only touched 54s, id like to get as close to 60s as I can. Not really new to box building, just having "writers block". Thanks, Chris
Re-Post: Dual 12'' Fi SSD's with cooling - Price Lowered.
DedicatedEnthusiast posted a topic in For Sale/WantedOk so new speakers are on their way soon so I am willing to let these go for $350 shipped in original packaging from Fi. They are dual 12'' SSD's with cooling just as the image says and are just over six months old. Again feel free to PM me with any additional questions or concerns.
Dual 12'' Fi SSD's with standard copper coils and cooling
DedicatedEnthusiast posted a topic in For Sale/WantedGot two 12'' Fi SSD's for sale that are literally less than six months old. They sound absolutely amazing in fact my ears were ringing after having listened to them for ten to fifteen minutes straight or so just the other day. They come with stock copper coils (meant for daily musical play) and cooling option for an additional 2-500 watts or so of increased power handling (giving each speaker an average of 1200-1500 watts RMS power handling for a total combined amount of 2400-3000 watts power handling) depending upon the install. The price for the pair is $450 shipped to your door in all of Fi's original packaging. Shipping alone runs right around $80 for the pair even if new from Fi so the price per speaker outside of shipping cost is actually about $185. These things look and sound practically brand new. The ONLY reason I am selling them is because i ended up getting a much larger than anticipated alternator installed and would like to take advantage of its abilities with larger more powerful speakers soon. It may be sort of hard to see my SSA username at the top of my sales sheet in the pictures below due to the lighting when they were taken but if you tilt your computer screen back and away from you I find that it is much easier to see that way. Please feel free to PM me with any additional questions or concerns:)
24" Tantric Subs on CT Sounds 7K getting stupid LOW!
CanUFeelMe posted a topic in VideosHank at my annual Halloween party giving the guests some demos. CRX infinate baffle with 2 24" Tantric subs on a CT Sounds 7K. Nice for him to also do some hairtrick selfies....lol