Jump to content
tez4life

Help with enclosure choise for single RL-p 15

Recommended Posts

I have a guy on CA.com thats going to build me a box for my single RL-p 15. I told him from several recommendations, 3.5cubic feet at 32hz. He has a box thats 4 cubic feet tuned at 28hz thats already build and good to go, (ive seen it as well)

Which box would you choose?

Sub is a Dual 4 wired to 2 ohm, powered by a Kicker ZX750.1.

I listen to alot of music, but love old school R&B and rap if im in the mood.

As always any feedback is apperciated, thanks.

Share this post


Link to post
Share on other sites

3.5 @ 32 would be my pick. though the other box wouldn't be bad, i'd take the one that was recommended.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites

Kent makes a great suggestion, but that 4 cube box would not hurt at all, should be a monster on the lowest of lows.

Share this post


Link to post
Share on other sites
Kent makes a great suggestion, but that 4 cube box would not hurt at all, should be a monster on the lowest of lows.

Thanks denim, thats kind of what the appeal of that box was to me, I know the recommend will work fine too.

Made my decision, thanks so much for the help guys.

Share this post


Link to post
Share on other sites

Settled on the 4@ 28hz enclosure and loved it, however, the surround on the RL-p started to come loose from the cone :(

Def not the subs fault, its pretty old and I bought it like that a while ago. Any ideas to fix it or should I be considering a recone. Sub still works fine.

Share this post


Link to post
Share on other sites

Buy some ca clue and glue it back ? :)

If there isn't any other damage, I think it's an easy fix.

Share this post


Link to post
Share on other sites
Buy some ca clue and glue it back ? :)

If there isn't any other damage, I think it's an easy fix.

Thanks Adrian, but I almost forgot about this thread. I fixed the sub last Sat and its fine now. Ill post some pics tomorrow if anybody is interested.

Share this post


Link to post
Share on other sites

Well, I got it all together and figured I would post some pics if anyone is interested

SANY0012-1.jpg

SANY0013.jpg

SANY0014.jpg

SANY0015.jpg

SANY0017.jpg

And a couple of vids, didnt turn out like I liked, but sounds fine to me.

Sub sounds wonderful and is very loud, almost everyone that hears it is hard pressed to believe its a single sub. Considering I have less that $325 total invested in the setup, it works out very well. Thanks Mike for building a very solid performer :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×