How to Bypass Pioneer AVH-P4000?

[casanova9289 0]

With the relay you don't need to touch anything...

A lot of OLDER decks you can just ground the parking brake wire...

For the new 08 pioneers they made it a bit more tricky, you can't just ground the wire...

Relay cost less then a switch, no drilling needed, no flicking it nothing..... When the deck turns on the remote wire has a slight delay added with the relays slight delay in switching does the EXACT same thing as a switch...

Just wire it up and go...

NC 1 what deck is that ??

sorry guys kind of new to this, setting up the pioneer avh-p4000 in a conversion van. the only part im having troubles with is on the relay that says "decks remote turn on wire" Can anyone explain what that is or provide any figures or pictures.. Thanks a bunch

That is a 12 volt switched power. It turns your amplifier on and off.

[casanova9289 0]

so is this the red/white cable the goes to the ignition? or the blue/white on that powers the amp? this is kind of confusing.

[E-RPM SOFT COM 0]

yea i thought u just had to ground the parking break wire to a constant ground