My Future Set-up (I Hope)

[Pezzaboi 0]

Thanks alot mate! great help, you've pushed to comps now lol!

do you recommend any? or have experience with

[Pezzaboi 0]

"D Bumpy!

That work well with SAX 100.2

i realise these are more to personal preferences, but still.!

[Pezzaboi 0]

Sorry Double.

But anyway, dont worry about budget just not anything to crazy

Edited September 21, 2008 by Pezzaboi

[Punkeyboozter 19]

Sorry Double.

But anyway, dont worry about budget just not anything to crazy

never heard hybrid Audio but heard good things.

can also look into cdt, hertz, morel,dls focal and the likes...seas also not bad

o and passive is the way to go if ur a noob and way easier to get right

[Pezzaboi 0]

Ok 8], it sounds harder to me!

Saved me a bit of money on the amp tho,

Erm could anyone just tell me if these amps come with wiring?

and any news on rear speakers

[///M5 2,833]

Rear speakers will make your system worse across the board and do nothing good. Waste money if you like.

For $250 the Pioneer 720 prs set is nice.

[Punkeyboozter 19]

Ok 8], it sounds harder to me!

Saved me a bit of money on the amp tho,

Erm could anyone just tell me if these amps come with wiring?

and any news on rear speakers

amps dont come with cables but you can normally get the cables for less if you buy a amp from a audio shop. forget the rear speakers bro unless you watch 5.1 DVD's or have a very long truck or car

[Pezzaboi 0]

well i plan on getting the sundown 1000 amp... of 1200 if i can!

so will have to be orderd online because im from the UK

i'm forgetting the rear speakers

last on my list is electrics, to sort out. really dont want more batteries and stuff, i need to find out what ALT i have. Won't be that big i suppose.

you defo recommend 0 Gauge?

[Pezzaboi 0]

OK dudes!

im going to build my own box, should be easy as im an apprentice Joiner 8]

if i build out of MDF 20" length 20" width and 11" depth, made of 3/4" MDF

the internal measurements should be 18.5", 18.5", 11"

So! 18.5 x 18.5 x 11 = 3764.75 / 1728 = 2.17 Cubic feet. The sub takes up 0.19 Cubic Foot which leaves it at 1.98 Cubic foot?

Can someone please check this over? my first go and hope to build on friday!

thanks alot, i can get more info if needed

[Punkeyboozter 19]

OK dudes!

im going to build my own box, should be easy as im an apprentice Joiner 8]

if i build out of MDF 20" length 20" width and 11" depth, made of 3/4" MDF

the internal measurements should be 18.5", 18.5", 11"

So! 18.5 x 18.5 x 11 = 3764.75 / 1728 = 2.17 Cubic feet. The sub takes up 0.19 Cubic Foot which leaves it at 1.98 Cubic foot?

Can someone please check this over? my first go and hope to build on friday!

thanks alot, i can get more info if needed

maybe you can try

http://www.soundsolutionsaudio.com/home/in...calculatorflash

let us know how it turn out.

what are you tuning to?

[F-150 Murphy 0]

mmm alpines are nice im buying some 5x7 oval speaks

[F-150 Murphy 0]

mmm alpines are nice im buying some 5x7 oval speaks

[///M5 2,833]

mmm alpines are nice im buying some 5x7 oval speaks

wtf? that has to rank up there with one of the dumbest posts ever. and a double one at that

[F-150 Murphy 0]

damn you like humiliating me huh?

[Punkeyboozter 19]

mmm alpines are nice im buying some 5x7 oval speaks

_BAN_ double negative doent make it right, but then again whatever tickles your fancy at the end of the day that is all that matters

[Pezzaboi 0]

Sorry the box is going to be sealed, so it doesn't need tuning right ?

Hmm the sealed calculator gives a different answer :S

Do i go by the calc! or the some: Height x Width x Depth / 1728 = Box volume in Cubic Feet?

just in case the calculator is wrong

[Pezzaboi 0]

Sorry sorted it,

Going to be 20 inch L, 20 inch W, 13 inch D, using 3/4" MDF, which gives the box 2.08^3 if you ask me

Don't tune a sealed box do you?

[Pezzaboi 0]

Can anyone answer the questions above :S

And also if you can!

if you were to buy an Fi Q 15" with a Sundown 1000d

What amp install kit and what else would you get from ere

http://www.knukonceptz.co.uk/productMaster...allation%20Kits

bits a bobs please

[Pezzaboi 0]

Want to buy my sub

Want to be certain first

[chad y 1]

you do not tune a sealed enclosure. I would run 0/ guage to a dist. then to 4 guage each amp.

[Pezzaboi 0]

No i didnt think so,

Could you recommend a package from somewhere for me to order, or packages. which should include all that i will need to wire it up

Np's if you cba

[///M5 2,833]

Sorry sorted it,

Going to be 20 inch L, 20 inch W, 13 inch D, using 3/4" MDF, which gives the box 2.08^3 if you ask me

Don't tune a sealed box do you?

You need internal volume, not sure on your math there:

Internal with a single layer of 3/4" based on 20/20/13

18.5*18.5*11.5 = 3935 / 1728 = 2.27 cuft

Subtract any bracing and the sub to get your actual internal. A double baffle wouldn't hurt either, but unless I knew which was top it'd be hard to give you that number.

Shop for wiring at Knukonceptz.com

[Pezzaboi 0]

MY BAD!

I forgot to say that i took out the sub room! which is 0.19 ^3 on the 15"

Sorry!

yeh im looking on there now.

http://www.knukonceptz.co.uk/productDetail...?prodID=KLM-AK0 - i've looked at this, i believe it covers all i need to install my amp.

http://www.knukonceptz.co.uk/productDetail...?prodID=KAR08SS - and this to connect subs to the amp

Just need someone to check it for me really before i make a big mistake.!

[Pezzaboi 0]

Basically i will need

0/1 from + power to amp?

a ??? size fuse with in 18" of the batt (What is the rating on the amp?) SAZ 1000d

Ground wire the same size as power? running to chassis

I need a dist block?

[Pezzaboi 0]

Want to buy my subby soon!