Who's the best here?

[Tirefryr 1,742]

I am also going to be getting the mirror myself as well. Just figured it would be easier for you to cut there with the wood if at all possible. On another note, I may not be on for a while as I'm feeling quite ill today, so if you don't hear back from me, pray that I'm dead. Cuz that's how I feel.

[mrray13 30]

i will have ur wood cut tomorrow...

he's charging me $20 for the pieces..of course i've got to cut it..lol..

lemme know ur idea on the acrylic, i was going to price it tomorrow..my day got tied up late this afternoon, so i didn't get time..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

I'm ordering the mirror next week. All I will need is for you to cut it so I can glue it to the interior of the enclosure once it is constructed, unless of course you want to put the whole thing together. It may be easier to ship that way.

[mrray13 30]

I'm ordering the mirror next week.  All I will need is for you to cut it so I can glue it to the interior of the enclosure once it is constructed, unless of course you want to put the whole thing together.  It may be easier to ship that way.

u tell me brother man..

however u want it done

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Whatever is easiest for you. I figured it may be easier to just assemble it so you actually have a shipping "box." Unless you have an ingenious way to ship them in pieces. I am talking to a company now about the mirror. If you feel up to it, I will order it and have it shipped to your place.

[mrray13 30]

Whatever is easiest for you.  I figured it may be easier to just assemble it so you actually have a shipping "box."  Unless you have an ingenious way to ship them in pieces.  I am talking to a company now about the mirror.  If you feel up to it, I will order it and have it shipped to your place.

that's kewl....i've got table saws. yeah plural...

lol

how do u want the box assembled? screws or brads? liquid nails or wood glue?

i'm off to cut your pieces......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Wood glue please. It makes for a better chemical bond. As far as fasteners, I don't care. I assume the brads would be easiest, so if that's what you feel, go that route. The glue is the security, not the fastener. I think I have a payment in mind that you will find adequate.

Thanks Kent!

[mrray13 30]

pieces are cut...

i will assemble tomorrow...

i can't find any mirrored acrylic...so i can't buy and cut from here.

if u wnat to buy and send, i'll cut and install....it's up to u..

i'll get ahold of u later for shipping and stuff...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Sweet. I have the acrylic handled. I just need it cut. I will let you know when it gets ordered. Thanks!

Oh, I need the inner dims of the box!

[mrray13 30]

inside dimensions are as follows..

back....11.5" x 30"

top & bottom.....13" x 30"

sides....11.5" x 13"

outside dimensions are, without ur 1" acrylic baffle are

13.5"t x 32" w x 14" d.....so when u add ur baffle it'll be 15" d

let me know if you want me to assemble and ship or wait for the acrylic.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Thank you sir. You can assemble. Hold off on shipping. I am trying to see if I can order and have it shipped to your location.

[Tirefryr 1,742]

Hey, would it be too much trouble to take those pieces and cut a little off the depth? A external depth of 12" would actually work better with my power requirements. If it's not too much trouble, I'd rather have this than the 15" If it's a hassle, don't bother. Thanks, and sorry!

[mrray13 30]

Hey, would it be too much trouble to take those pieces and cut a little off the depth?  A external depth of 12" would actually work better with my power requirements.  If it's not too much trouble, I'd rather have this than the 15"  If it's a hassle, don't bother. Thanks, and sorry!

not a problem..it's only 4 outa the 5 pieces that have to be cut...

but honestly...no biggie.....but just to clarify..

u want 3" taken off the depth, so that with ur baffle, the depth is 12"..correct?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Correct. Thank you!

[mrray13 30]

ur welcome and consider it done..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

"Have I told. . . . . . .You. . . lately. . . . . .that I love you?!"

[mrray13 30]

"Have I told. . . . . . .You. . . lately. . . . . .that I love you?!"

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

ryan..

before i cut this down (sorry, i got busy), are u sure u want to go smaller? i mean, running less power, the sub would benefit from the larger enclosure..ie: better low end response, more effiency allowing for xmax with less power, meaning it'll be louder.

let me know either way, i'm currently not busy, so i'll be able to get it cut down and assembled.

any news on the acrylic?

any other news? u fall down any lately?

lol..sorry.....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Yes go smaller. I didn't want to go too big, and once I recalculated, the 12" will get me just under 2 cubes once the acrylic is installed. It won't get played loud anyways, but I'm just being on the cautious side. THe 15" depth was more around 2.3-4 cubes so it was a little larger. I kept thinking 15" driver. Duh!

As for the acrylic, I'm sorry, I've dropped the ball on that one. I can't seem to have a day where I don't have a massive headache, so I've kinda just been lying around a lot. I'll get on that tonight and let you know what is up with shipping. Thanks again!

And, oh, I'm in NO hurry, so don't go out of your way here. I am just now actually getting the driver in. Got it all disassembled and the basket is currently getting media blasted. It'll be a while until the actual driver itself will eb operational.

[mrray13 30]

alrighty then.....

i'll get er cut down and assembled so that she'll be awaiting...

how's titebond II premium wood glue?? only the best for u...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Awesome! I'm awaiting a response from the company on shipping the mirror to you.

[Nikuk 1]

I'm anxious to see how this box turns out... LoL

Reality Box Building... the next craze @ Fox.

-Nick

[mrray13 30]

i can't wait to see the finished product myself..

i know this much..

i've never cut a box this precise...it won't need any sealer, that's how tight the joints are!

when i get it assembled, i'll lay a straight edge across the edges and take a pic..

like a glove baby...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

AWESOME! Acrylic mirror will be en route to your location Monday.

[mrray13 30]

it is cut down and ready to assemble..which will happen tomorrow..

pics soon...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee