Who's the best here?

[Tirefryr 1,742]

Kent, hold off on attaching the mirror pieces. If you could somehow just cut them and fit them in the enclosure for shipping after verifying fitment, that would be great. I am going to have some mini logos etched on them as well as my baffle. I can tell you, this will be one sweet enclosure when I'm through with it. Expensive as well. Oh, I ordered quite a bit of the mirror as well, so if you'd like to keep what's lefty, then by all means. If not, just send it my way.

[Aaron Clinton 2,372]

I am excited too

[mrray13 30]

Kent, hold off on attaching the mirror pieces.  If you could somehow just cut them and fit them in the enclosure for shipping after verifying fitment, that would be great.  I am going to have some mini logos etched on them as well as my baffle.  I can tell you, this will be one sweet enclosure when I'm through with it.  Expensive as well.  Oh, I ordered quite a bit of the mirror as well, so if you'd like to keep what's lefty, then by all means.  If not, just send it my way.

okeeeeedoookeeeeee

i'll have the box assembled here directly...the mirrors will be cut to fit, but not attached...when i get the acrylic...lol..

alrighty then...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

straight edge one side..

straight edge other side..

13.5" tall...i dunno if u can see the tape real well..

32" long....

11" deep, not counting the baffle that's yet to be attached...

while i'm not going to say it's perfect..it's really,really, really close...

whatcha think ryan??

btw..titebond II premium wood glue dries white if ur wondering what the white stuff is.....hehe....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :peace:

[Tirefryr 1,742]

That is BEAUTIFUL work my friend. You are indeed a master!!!!!

[Aaron Clinton 2,372]

that is extremely smooth work Kent

[mrray13 30]

where's the smilie for a big head??

anyway, thanks guys...

it's sitting in my office so that the glue can cure at a decent temp. also because my wife wanted her car back inthe garage..lol...

anyway, i await the acrylic...

and also, ryan, do u want me to route (roundover) the edges or are u wanting to do all the finish work?

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[80INCHES 0]

wow that is good work....i use 2 build boxes and now i design them and have someone else build it.

80

my best design was 4 12inch rf hx2's in a 4th order bandpass

being powered by a bd1500@ .5ohms

(yes the amp was frying full course meals but if u put a decent fan it will run for a good hour)

on the dash it hit 152db's playing EMINEM Ass like that

[Aaron Clinton 2,372]

wow that is good work....i use 2 build boxes and now i design them and have someone else build it.

80

my best design was 4 12inch rf hx2's in a 4th order bandpass

being powered by a bd1500@ .5ohms

(yes the amp was frying full course meals but if u put a decent fan it will run for a good hour)

on the dash it hit 152db's playing EMINEM Ass like that

that had to hit very hard

if you need someone to build a box, the TeamSSAudio guys are very good, as you can see

[80INCHES 0]

yes it did........it got to the pont now i cant sit in his car......but i told be4 i designed the box that i will make so that he can have his speakers 4 along time....and its been about 2years now and his speakers play very well...havent blown one yet

80

hey denim

i still got th specs 4 that box...oh did i mentions all this in in my friends caddy deville...

[80INCHES 0]

if you need someone to build a box, the TeamSSAudio guys are very good, as you can see

<{POST_SNAPBACK}>

u know what i'm glad u mentioned that...because i'm getting ready 2 put something in my mazda millenia...i'm thinking 2 15's or 3 10's

i'm undecided...i need help with this....lol

ok ok ok

im going to be honest

my goal is smoke my friend who hitting 153db's with 2 13w7...i want to hit atleast the same if not better..with a sub other than w7's

[Aaron Clinton 2,372]

if your interested, I believe that CBRstereo.com is haveing a great sale on HX2 15's for like 120, and you could put them in a serious box built by Jamie or Kent, and James can design it for flat out SPL if that is your hope, it would not be that expensive over all with the cost of the subs,

I along with a few other guys on here know the ability of those subs and that they dont need excessive amount of power to get loud, that way you would have an advantage on the JLs in consurface for sure

[Aaron Clinton 2,372]

oh yeha I fixed your sig for ya like you wanted

[Tirefryr 1,742]

Quit spamming my thread!!!

Kent, no roundovers for me. All will be concealed anyways.

[mrray13 30]

Quit spamming my thread!!! 

Kent, no roundovers for me.  All will be concealed anyways.

okeeeeeeeedoooookeeeeeeeeeeeeeeeeeeeeeeeeee

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Just got word on the mirror today. It's shipping and should be heading your way. I sent you an email with all details. I'm going to give you a call on Saturday as well if you don't mind.

[mrray13 30]

Just got word on the mirror today.  It's shipping and should be heading your way.  I sent you an email with all details.  I'm going to give you a call on Saturday as well if you don't mind.

u know the number bro..gimme a yell!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

bah..u never called....

anyway, the mirror is here...

i will get it cut by this weekend...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

MY bad. Saturday was a bad day. I had been up for 2 days straight and needed some sleep! Thanks man!

[mrray13 30]

ur welcome

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

I just got a call from Sears on a new motor for my saw. $358.

NOPE!

[Tirefryr 1,742]

Hey Kent, could you take a scrap and photo the mirror for me? I'd like to see how clear it actually is.

[mrray13 30]

Hey Kent, could you take a scrap and photo the mirror for me?  I'd like to see how clear it actually is.

done my friend...

looks like glass..

and who's that sexy beast in the reflection??

also, a head on shot of the box with the mirror in it (still got the protective covering)

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

WOW!!!

that looks GREAT!!! Awesome job Homie!!! You look like you're checking out gay porn on the net. Thanks Kent!! I owe you big time!

[mrray13 30]

  WOW!!!

that looks GREAT!!!  Awesome job Homie!!!  You look like you're checking out gay porn on the net.  Thanks Kent!!  I owe you big time!

i thought that was u and billy bob...

ur welcome man...

i'll get it siliconed up and shipped by saturday!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee