Need a box

[black_panther_2005 0]

I have a 94 grand am I was wondering if there was anyway possible someone could make a box for it.

[mrray13 30]

I have a 94 grand am I was wondering if there was anyway possible someone could make a box for it.

scroll down a lil farther to the TeamSSAudio forum...

right site..wrong thread...lol

done.......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Chevy350TPI 12]

Where are you located?

Should be no problem getting an enclosure done for you. We have multiple builders across the US and Canada, so you won't have to pay worst case shipping from New York to California.

- Steve

[Aaron Clinton 2,372]

welcome to TeamSSAudio,

can you tell us what your looking for and what equipment you are going to use?

[black_panther_2005 0]

welcome to TeamSSAudio,

can you tell us what your looking for and what equipment you are going to use?

<{POST_SNAPBACK}>

Well i was just wanting a wood box covered with carpet and i wanted it to sit back into my trunk because where my subs are now i cant fit them under my 6x9's and i need someone to design where the box fits around them and sitting against the back of my set. I also have 2 15" audiobahn subs that will be in the box. I live in Indiana by the way. So just let me know what you can do. thank

[Aaron Clinton 2,372]

Ok sounds like a good start,

mrray is not far from you in location, are you wanting a ported box or sealed, and could you provide us with the model # of the subs so we can get the specs on them so the box will be built correctly for them

[Jmac 24]

Hello,

I'm James and I may or may not be your designer on this project ...

Information needed:

Height to 6x9s

Width

Depth

If you're wanting a slanted enclosure, we'll need the angle of the rear seat in comparison to the floor ...

Model #

Amplifier model #

Set-up (Sound Quality, SPL Competition, Daily Driver)

Type of music

etc.

[mrray13 30]

jmac will be the designer...lol

hey james...u get any pm's from the winners at ca??

if not..i've got one i need to send u for just the design...

now back to the topic at hand

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Jmac 24]

Nope, I haven't ...

I actually completely forgot about that

[mrray13 30]

Nope, I haven't ...

I actually completely forgot about that

ok..later one, i'll send u the info from the one winner that wants his design sheet.

mattj has decided he doesn't want his enclosure..and i haven't heard from the other sheet winner...the one i have heard from starts with z..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[black_panther_2005 0]

The Height to the 6x9s are 15 1/2 in.

The Width is 38 1/2 in. from my wheel wells

From the back of the seat to the 6x9 is 4 1/2 to the seat to the front is 9 1/2.

From the wheel well to the 6x9 is 5 in. to 10 in.

The distance between the speakers are 19 3/4 in.

The Model # is Alum 15Q and the other is Alum 15X the difference is 2001 series and 2003 series. They both have 1000 watts on the back, So if that helps you any.

The set-up is whatever you can do to make it the loudest inside the car. I'm just a daily driver but i want it as loud as possible. I will have a 1000watt crunch amp, I dont have it let but i will in a couple of weeks. I listen to a little of every music rap, rock, hip hop, ect.

If you need any more info let me know.

By the way how much do you think this will cost?

Thanks,

Derek