Jump to content

Recommended Posts

hey dumbasses...lmao

i was suggesting .75ft^3 per sub..so 3ft^3total with 32in^2 of port..lol...for 4 subs!!!

so it really wouldn't be that long, would it??

make an ASSumption u become one...lmao...

weiners..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites

dont laugh at me, I am just trying to build a pup pen :P

Share this post


Link to post
Share on other sites

what's funny is u and nick thought i meant a 32in^2 for .75ft^3..lol...u two misread my post...lol

but hey...lol...with 32in^2 of port in a .75ft^3 of box, u'll have zero port noise...hehe

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites
sweet just checked email, maybe I can run up to Home Depot tomorrow

important side note Aaron:

BBP6 doesn't calc slot ports very well!!

You'll notice that it has 4 boards for the port. Thats obviously wrong...

You only need the top & two sides. I account the board thickness appropriatly in the program, s oyou dont need to worry about that. But only build the slot port with the top & two sides.

If you want a full explanation, I'll type on in tomorrow during the day. Otherwise, I'm going back to the couch & watching this movie :)

-and-

Kent? Calm down yah wanker.

-Nick

Share this post


Link to post
Share on other sites

This must be the IHoP tonight huh?? The Pups have prevailed. Believe the hype! Any word on a PowerPup anyone(Nick)?

Share this post


Link to post
Share on other sites

No new info about the power pups

PBUSA hasnt been on here, sent him a PM about the power pups

Share this post


Link to post
Share on other sites
This must be the IHoP tonight huh??  The Pups have prevailed.  Believe the hype!  Any word on a PowerPup anyone(Nick)?

Havent seen PBUsa around.... sucks too, he was gonna hook us up. Just pay shipping. :D

I plan on starting up a convo with some other OEM's...

Maybe Mike @ SS?

Problem is... what can they do that'll work with a 1.5" coil?

Unless someone's willing to graft a Pup cone & cap into another woofer's soft parts.

Share this post


Link to post
Share on other sites

thanks nick,

I can't start building today, gotta run around (sorta still moving)

Share this post


Link to post
Share on other sites
This must be the IHoP tonight huh??

Share this post


Link to post
Share on other sites

I wish to have no dealings with RE.

I am thinking about adire though. The 15" pup should be here late this or early next week. I'll go from there.

Share this post


Link to post
Share on other sites

since this has become the Pup Post All thread... i;ve got some pic's to share :D

:mrspam:

Share this post


Link to post
Share on other sites

You won't get anywhere with Adire right now. I can tell you that much.

Share this post


Link to post
Share on other sites
You won't get anywhere with Adire right now. I can tell you that much.

any particular reason? other then them reorganizing et al?

Share this post


Link to post
Share on other sites
You won't get anywhere with Adire right now. I can tell you that much.

any particular reason? other then them reorganizing et al?

That's the exact reason. Well, to my knowledge at least. Now if you were to come in there and flash a TON of money, you will probably get something done, but a small piece or order, forget about it.

Share this post


Link to post
Share on other sites

hey nick how did you blow the pup?

:253:

Share this post


Link to post
Share on other sites
hey nick how did you blow the pup?

:253:

this was the damaged 8".

I figured that I'd tear it apart to get a look at the coil.

ahh ok, sorry I dont keep up with everything on SIN much anymore, I am only there for the group buys and Momentum

:Cavalry:

Share this post


Link to post
Share on other sites
hey nick how did you blow the pup?

:253:

this was the damaged 8".

I figured that I'd tear it apart to get a look at the coil.

ahh ok, sorry I dont keep up with everything on SIN much anymore, I am only there for the group buys and Momentum

:Cavalry:

LoL... i dont blame you. I pretty much treat it the same. :lol:

Share this post


Link to post
Share on other sites

its a cool site, some of my best online audio buddies call home there, but I am not always a fan of some of the other regular posters there, I just never felt all that comfortable there

Share this post


Link to post
Share on other sites
sweet just checked email, maybe I can run up to Home Depot tomorrow

important side note Aaron:

BBP6 doesn't calc slot ports very well!!

You'll notice that it has 4 boards for the port. Thats obviously wrong...

You only need the top & two sides. I account the board thickness appropriatly in the program, s oyou dont need to worry about that. But only build the slot port with the top & two sides.

-Nick

when you mean the top and two sides, do you mean the top and two sides of the "vent parts" or the top and two sides of the "box parts"

meaning are you saying the bottom and sides of the port are the bottom and sides of the box, :wacko:

Share this post


Link to post
Share on other sites

i only mean that the bottom of the port is the bottom of the box.

you only need to attach the port sides & top.

Share this post


Link to post
Share on other sites

BassBox does not account for a slot port. Just a square port. I use it as a reference for port area, then simply enter 0 for the volume the port displaces, figure out my vent length for desired tuning, then add the interior port walls to the miscellaneous objects inside the enclosure to account for their displacement and BINGO!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×